Good job on the tank, and your first one too, wow. 👍🏻 I like the tank too, did not know Dragon has this model. I will look for it. Thank you for sharing this. 😊
Очень хорошо получилось, я смотрел видео на одном дыхании. Единственное что бросилось в глаза это то, что пулемёты танка не окрашены в свой стальной цвет, они такие же зелёные как и сам танк(Или для танков этого типа это нормальное явление?). И если предполагается что машина уже бывалый боец, то можно добавить копоть на стволе танка.
Nice job really impressed with the ease on the figure painting, not one of my strong points but seeing how much you thinned the paint may help. What air pressure do you use?
The air pressure from the compressor is 0.09 to 0.1 MPa, which I believe is the manufacturer's recommended air pressure, I wonder if this air pressure is low for foreign paints? I was told this before.😁 コンプレッサーからの空気圧は0.09~0.1MPaです、海外の塗料だとこの空気圧では低いのかな?前に言われました
Great model, very interesting! The only fault I think is the soldier holding the Arisaka’s gun lock into the salty sea water. That would ruin the gun and I think his superiors would punish him for doing so! No soldier would do this in reality!
Thanks I'll look it up. Incidentally the "BMC/VICTORYBUY" website has reissued the old Marx Japanese toy soldiers from the 1960's in soft plastic, in a glossy yellow/tan color. Really nice. I think the Japanese Army and Navy uniforms, on land, were basically the same except the Army had a star on the helmet and the Navy had an anchor.@@JapanatWar
The issues you had with the track are not caused by age, but by them being DS tracks. Those ds tracks do not go with enamel paints, enamel destroys them, and there just Shitvtracks and material. Dragon always trying to squeeze as much money from the customer, all the while giving customers crap, and the customer service is the worst. Great work by the way!
Those damnable DS tracks. Mine has been sitting in stash for 10 years now, I wonder if they stiffened up like yours did. They are supposed to be flexible like rubber but glueable. Nobody likes them. Anyway the vehicle/dio looks great.
Es un tanque burro no un submarino y los tanques tienen orugas para andar.tenia cierta capacidad de vadeo pero no es un submarino para navegar por el agua!!!.
No, not as such. But they used specially-trained sailors AS marines in "Special Naval Landing Forces". Japan only had an army and navy; no separate marine corps or air force or coast guard.
Great job of modeling...but you get a thumbs down for your audio. Seriously...turn off your mic...the noises of jars opening and closing, airbrush, tools rattling around on the desktop is really annoying and distracting...stick to using just background music
Just mute the video and play your own music, problem solved I prefer the random sounds because it makes the video more genuine, like we're just watching a guy build his model, diorama and having fun
I love how diverse this kit is to your normal builds. I’d love to see more tanks and aircraft!
色も相まってウミガメが産卵のために陸に上陸してるみたい😂
作るのを見ててとても楽しい😆💕✨
今回もとてもすごかったです
特に上陸している様子が迫力あってすごくいい
Good job on the tank, and your first one too, wow. 👍🏻 I like the tank too, did not know Dragon has this model. I will look for it. Thank you for sharing this. 😊
As always; Excellent modeling craftsmanship!
Thank You!
That cool thing you did with the gel to make water.
特二式内火艇って可愛いですよね
Очень хорошо получилось, я смотрел видео на одном дыхании. Единственное что бросилось в глаза это то, что пулемёты танка не окрашены в свой стальной цвет, они такие же зелёные как и сам танк(Или для танков этого типа это нормальное явление?). И если предполагается что машина уже бывалый боец, то можно добавить копоть на стволе танка.
Incredible work!
Nice job really impressed with the ease on the figure painting, not one of my strong points but seeing how much you thinned the paint may help. What air pressure do you use?
The air pressure from the compressor is 0.09 to 0.1 MPa, which I believe is the manufacturer's recommended air pressure, I wonder if this air pressure is low for foreign paints? I was told this before.😁
コンプレッサーからの空気圧は0.09~0.1MPaです、海外の塗料だとこの空気圧では低いのかな?前に言われました
Great model, very interesting! The only fault I think is the soldier holding the Arisaka’s gun lock into the salty sea water. That would ruin the gun and I think his superiors would punish him for doing so! No soldier would do this in reality!
Fantastic job as always ❤
Wow! That looked awesome!
Спасибо ! Очень было интересно .
That is quite impressive and it looks realistic
海軍所属戦車だと短十二糎自走砲とかどうでしょうか
カミ車はフロートが付いてると特二式内火艇で、フロートを外すと特二式戦車に名前が変わる戦車
34:30 レインコートみたいで可愛い
You must be out of your comfort zone building armor land vehicles instead of ships nonetheless awesome job!👍
🎉 很厲害🎉 謝謝分享😊 祝順心愉快😊
神動画ありがとうございます。
カミ車だけに、、、
its good, make more i love tank diorames
Nice job!
今回は連結型でしたが、戦車模型は履帯作業(可動型だと更に)が非常に地味でめんどいので、嫌になる方いらっしゃるかも……
Interesting video! Never heard of Japanese amphibious tanks before, and I've been studying WW2 a long time! Very interesting.
I actually did a video covering them if you're ever interested
Thanks I'll look it up. Incidentally the "BMC/VICTORYBUY" website has reissued the old Marx Japanese toy soldiers from the 1960's in soft plastic, in a glossy yellow/tan color. Really nice. I think the Japanese Army and Navy uniforms, on land, were basically the same except the Army had a star on the helmet and the Navy had an anchor.@@JapanatWar
Great job. Well done. 👍👍
戦車の足回りには動輪 転輪 上部転輪 誘導輪があるのでまとめて「足回り」のがいいかも知れないですね
@Amegraphy DRAGON キットに付属していたオリジナルの DS トラックを使用しましたか、それともトラック全体をアフターマーケット製品に置き換えましたか?
no, i actually do have a first copy of the garage cast hardy daytona with cloud. the instructions didn't make sense, it's still in the shrink wrap.
very nice job
The issues you had with the track are not caused by age, but by them being DS tracks. Those ds tracks do not go with enamel paints, enamel destroys them, and there just Shitvtracks and material. Dragon always trying to squeeze as much money from the customer, all the while giving customers crap, and the customer service is the worst. Great work by the way!
海軍の短十二糎自走砲とかどうでしょうか?
タンクは海岸に向かって走行するときに海水を押しのける必要がありますか?
感恩你
Those damnable DS tracks. Mine has been sitting in stash for 10 years now, I wonder if they stiffened up like yours did. They are supposed to be flexible like rubber but glueable.
Nobody likes them. Anyway the vehicle/dio looks great.
这款套件的售价是多少呀❤!
🎉
если танк выезжает из воды, то почему у него гусеница а катки грязные? Они должны быть чистыми
Es un tanque burro no un submarino y los tanques tienen orugas para andar.tenia cierta capacidad de vadeo pero no es un submarino para navegar por el agua!!!.
For clear waterproof tape, duck and gorilla glue make clear waterproof tape
Did the Empire of Japan have a Marine Corps?
No, not as such. But they used specially-trained sailors AS marines in "Special Naval Landing Forces". Japan only had an army and navy; no separate marine corps or air force or coast guard.
Yes they did
most country's don't have a "Marine Corps" most field "Naval Infantry" fills the same role as Marines but directly under the Navy
LVT RISE UP
Please GERMAN TANK PANTHER G MODEL
와...쩐다
How useless is the Machine gun in Front next to the Driver Seat? Or im Missing something here.
the floats come off after the landing
こう見ると、AAV7とかあんま進化して無いですね。
唯一違う所がカミ車は潜水艦で輸送出来る事ですね
But AAV-7 isn't pontoon tank, it's amphibious armored personnel carrier.
норм
ага и броня 13-15 мм
ガルパン最終章に出てたヤツかな?
そうですね!
Didn’t make many and didn’t work that well
Dragon? More like a turtle in drag!
フロートを外した姿がタイガー戦車に見えたらしく、一時、米軍がパニックになったそうです。
しかし、落ち着いて見れば弱装甲な事は一目瞭然。簡単に撃退されてしまいました。
日本軍って、こうゆう 一発芸的な兵器が、そんなに好きなのか!?
上陸艇が重装甲だと沈んじゃうんじゃないかな?
基本的に水に浮く戦車は軽装甲で防御は期待できない。
アメリカもソ連も作ってるけどどれもペラペラだよ。
いや~波はハッキリと白くしない方がよかったかな?洗剤のアワの様に見えます。
悪しからず。
If you can do better.... Please show us
all that work and such a bad job on the skin and faces of the figures.
Like you can do anything better.
See your a God damn kid, Go back to watching Cocomelon or shot
Make it better then kiddo
Take your bad attitude elsewhere
Great job of modeling...but you get a thumbs down for your audio. Seriously...turn off your mic...the noises of jars opening and closing, airbrush, tools rattling around on the desktop is really annoying and distracting...stick to using just background music
Just mute the video and play your own music, problem solved
I prefer the random sounds because it makes the video more genuine, like we're just watching a guy build his model, diorama and having fun
If you don't like the sound made by a kit modeler with his tools you're not in the good place...
Volkswagen bug yo 👍