It's been a few weeks since I've seen I've been caught up on your videos. I've been busy living the best year of my life. But now it's time to catch up and watch all the videos I've missed. I've been a 100% video watcher for years & I don't ever plan on stopping!!
Dude that piece of Steel is perfect pounding out a knife. I'd keep it too. I love repurposing materials. It's even more exciting than a good payday at the scrapyard
The little transformer with the handle and plug on the side is called an isolation transformer, it disconnects you from mains voltage so you don't get electrocuted when testing electronics. That you could sell all by itself.
The stuff with the big PV Array DC Isolator switches used to be used for a Solar panel array, if you ever want to rig up some solar power on top of your garage or so, that might come in handy!
That 3 Phase variac is very cool! Reminds me of something you would see @Photonicinduction using to fry some old electronics up in one of his old videos!
We use those big blocks in the Automotive world as a spacer for a height gage. Some people call em gage blocks. I’ll bet it’s been ground to exactly 200 mm or something like that.
L👀KS like an ULTIMATE #aluminum breakdown and turn in special in the near future. AND I would request a bin or 2 of wire stripping. #FreeTheBins 😊 #copper #COPPA
I urgently have to come over to your place to clean up. It looks terrible. You can't find anything in the clutter-filled Gerrasche and the laptops have RAM, a hard drive and a mainboard. The rest is junk electronics😊😊😊💷💷💷💷💷💷💷💷💷💷💷💷💰💰💰It was worth it with the cable scrap Money Great video of you on Schrott Tour, keep it up😊😊😊👍💪The company dissolution was worth it with the trasvomators and the copper and aluminum
Please, do a scrap video from this pickups. Very hyped for the thing oddnall thing which had the gold pins. It was full of "power resistors" which are quite valuable and all that packed stuff at 49:15.
I'd love to have that Steel! I would use it on my bench to process the smaller transformers when you're SMASHING THEM!😊 #COPPER WHY do I have to live in Minnesota 🇺🇸 when the cool stuff is in 🇦🇺 😡😊
Ihave stage4 copd dieing I have concern for you if you haven't yet seen doc I think you should dying of copd no picnic more like torture ☹️ exercise is very important it will keep you alive I have been diagnosed copd 11 years.
I have noticed over the years that you have done less and less as far as you doing the tear down. Like monitors for an example. You get zero return out of them. Actually lose money because you spend the fuel and time to get them and just dump them. Can’t you at least take the stands off for scrap steel. Just wondering why? When you started on TH-cam you did full tear downs and now you just get rid of stuff lol
He said if someone wants to buy it from him they are more than welcome to make an offer, but he doesn't have an unlimited space to keep it around for ever.
@@stephenw2992 I am also into selling things without taking them apart, but we are talking about Ben here. He doesn't have an unlimited space to store things.
I suffer from PTSD caused by the blue screen of death! I cringe every time I see you toss electronics! Especially hard drives! Whenever you become a big youtuber, can you convert to US dollars and lbs instead of kilos, (captain is fine)?
You were talking about the "Old man sound". That doesn't bother me but with all due respect you should quit smoking. That Doc Holiday chunky cough I find nauseating.
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
I really appreciated that half an avocado kept their promotion so short and unobtrusive.
Was so surprised about the avocado sponsor! Should do that more often, that really cheered me up this morning!😀
It's been a few weeks since I've seen I've been caught up on your videos. I've been busy living the best year of my life. But now it's time to catch up and watch all the videos I've missed. I've been a 100% video watcher for years & I don't ever plan on stopping!!
You have and I appreciate it mate
Dude that piece of Steel is perfect pounding out a knife. I'd keep it too. I love repurposing materials. It's even more exciting than a good payday at the scrapyard
Jeez, those transformers are beautiful. Lovely copper inside.
Shout out to a half avocado! I am a big fan too.
The little transformer with the handle and plug on the side is called an isolation transformer, it disconnects you from mains voltage so you don't get electrocuted when testing electronics. That you could sell all by itself.
The stuff with the big PV Array DC Isolator switches used to be used for a Solar panel array, if you ever want to rig up some solar power on top of your garage or so, that might come in handy!
That 3 Phase variac is very cool! Reminds me of something you would see @Photonicinduction using to fry some old electronics up in one of his old videos!
Another excellent video!! Love the copper!! Beautiful!!! Thank you Ben.
This was an awesome video with great pickup and scrap run keep up the awesome work six stars sir
Hi bud from northwest Missouri in the USA can use the double chanel chunk of steel for a anvil
Have a wonderful day Ben. 👍👍👍❤️❤️❤️😎😎😎
We use those big blocks in the Automotive world as a spacer for a height gage. Some people call em gage blocks. I’ll bet it’s been ground to exactly 200 mm or something like that.
I love these type videos. Becayse after viewing i go searching ti see what some of thr stuff is and hiw it works
I always go to the scrap unit on a Saturday. In & out, quick as like
Love working at the scrapyard. The yard I work at specializes in aluminum.
The ol man lifting sound effect 😅. I make an additional sound when I lift things from my knees cracking/popping
good work , keep your thinking cap on !!!
Hi Ben looking busy same here I can keep up granulator and pre shredder running 50hr plus a week
Getting your steps in. God bless.
Nice pickups. Great video
I laughed so hard about the avocado that my food fell out my mouth 😂
I did too, it was very unexpected and hilarious
love it
L👀KS like an ULTIMATE #aluminum breakdown and turn in special in the near future. AND I would request a bin or 2 of wire stripping. #FreeTheBins 😊 #copper #COPPA
That length of ally mate ,,,,Square Box Section . Good days graft mate.👍
Ben those two big transformers go with the veriac, just letting you know.
TIME FOR SOME CARDIO BEN! Im at the gym right now watching you, if i can do it anyone can. Thanks for the video always a treat mate!
I think he smokes to many ciggies. Otherwise he quite fit with all the running around he does
Damn Ben! You are a machine.
Nice vid Ben, when are you going to more smelting?
Might come in handy.... 10 years later it's still on the same place 😂
Great vids mate keep them comming
Overdrive Voltage = OV.
Maybe scrap most of the stuff but keep one of each?
I urgently have to come over to your place to clean up. It looks terrible. You can't find anything in the clutter-filled Gerrasche and the laptops have RAM, a hard drive and a mainboard. The rest is junk electronics😊😊😊💷💷💷💷💷💷💷💷💷💷💷💷💰💰💰It was worth it with the cable scrap Money Great video of you on Schrott Tour, keep it up😊😊😊👍💪The company dissolution was worth it with the trasvomators and the copper and aluminum
Homemade welding machine could use a variable speed transformer I have built one using a similar transformer
Time for some new gloves Ben! Lol
I have learned so much from you!!! Thank you!!
Love Your's video 👍😍
As a beginner who wants to start this for a hobby where do you get the e waste in the streets or you have to buy them off scrap yards?
That copper insulated wire is 10 cents a lb where I live. I wish I got paid half what you do. Steel is 6 cents a pound
I love your random sense of humor. Avocado lmaoooo
Aluminium box section ben!!
Please, do a scrap video from this pickups.
Very hyped for the thing oddnall thing which had the gold pins. It was full of "power resistors" which are quite valuable and all that packed stuff at 49:15.
Ben, I would make a rocket stove out of the piece of steel... wish I had it.
its called box section in uk
22:25 machinist block. Not cheap!!
Hello Ben! Visiting Melbourne from Sweden. We are looking for a used dvd or bluray player. Any idea where we could find one?
Cheers
If you sell that variaq to someone can you tell us what you got for it?
Great video
Haha so now you have youre own special pvc stick to steal lemons from the neighbours tha would make a great clip
Hy ben, miss to see u street scrap again😊
I think you could probably sell those transformers as is.
Gr8 vid mate. With keyboards r U still taking the plastic with silver out or U don't bother anymore. Cheers Graham
Sometimes I do but mostly no time to do it
@@eWasteBen ok thx for getting back to me.
Maybe you should take one trash can with wheels to your pickup instead of the trolley you may be able to get more stuff packed into the van
I'd love to have that Steel! I would use it on my bench to process the smaller transformers when you're SMASHING THEM!😊 #COPPER WHY do I have to live in Minnesota 🇺🇸 when the cool stuff is in 🇦🇺 😡😊
Yay🎉😁
Ben your Gloves look terrible should I send you a pair 🤣👍🏻😊
Hello Ben.
Do you buy eletronic scrap from other countries? Exemple BRAZIL
No your best to send to boardsort in the US
What do you do with all the big capacitors Ben?
Mostly go to irony ally
It won't let me skip the add about half an Avocado.
satelite cdt is verry rae , i dont know and sell it for 35 dolars , my friend took of me a 100dolars :)
24:16 "There's a huge transformer in there."
Autobot or Decepticon?
Is that Copper on the floor?
Você pode usar encima da mesa como base para martelar e quebrar as peças quando necessário, como uma bigorna
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Man id of had a rubbish box and separated the extruded from the packaging as i loaded it.
👍👍👍😎
I hope your neighbour isnt watching Ben 😂😂
Ben you can’t keep posting videos I have a uni assignment due.
Just sat an exam think I failed it coz I’ve just discovered the channel 😢
If you watching this instead of doing your uni assignments you are really procrastinating.
I would call your audio "locomotive breath" lol.
Too many cigarettes breath
Why didn't you just load everything up on the trolley instead making all those trips
Why don't you stack multiple boxes on you're doly save yourself multiple trips?
The warehouse is so big why?
because people have big operations
Don't you strip your wire before you take it to scrap yard ???#2 probably 2 bucks. A pound
Ihave stage4 copd dieing I have concern for you if you haven't yet seen doc I think you should dying of copd no picnic more like torture ☹️ exercise is very important it will keep you alive I have been diagnosed copd 11 years.
Don't the keyboards have silver in them anymore
Yes but no time
ben that would be a nice bulding for your company
Ben get yourself a granulator for copper wire and you will get $9.55 a kg for the copper
I have noticed over the years that you have done less and less as far as you doing the tear down. Like monitors for an example. You get zero return out of them. Actually lose money because you spend the fuel and time to get them and just dump them. Can’t you at least take the stands off for scrap steel. Just wondering why? When you started on TH-cam you did full tear downs and now you just get rid of stuff lol
DO NOT SCRAP THOSE TRANSFORMERS, NOT TO MENTION THE GIANT VARIAC. (Ham radio, audio people etc.
He said if someone wants to buy it from him they are more than welcome to make an offer, but he doesn't have an unlimited space to keep it around for ever.
@@toomaskotkas4467 Not much copper in a variac. Worth much more as is, or even pulled apart into single phase variacs
@@stephenw2992 I am also into selling things without taking them apart, but we are talking about Ben here. He doesn't have an unlimited space to store things.
@@toomaskotkas4467 He would be better putting the time wasted to dismantle that thing into getting rid of some obsolete junk so there is space for it
Do not pick up scrap off the streets anymore
Hi
I suffer from PTSD caused by the blue screen of death! I cringe every time I see you toss electronics! Especially hard drives!
Whenever you become a big youtuber, can you convert to US dollars and lbs instead of kilos, (captain is fine)?
You gotta quit smoking. Breathing heavy before you even started lifting anything.
You were talking about the "Old man sound". That doesn't bother me but with all due respect you should quit smoking. That Doc Holiday chunky cough I find nauseating.
is it cobber or copper
its box section