Seriously awesome video, sound imitations, and information. Thorough enough to help anyone understand while concise enough to not get boring. But, am I the only one(didnt read all comments) who noticed at the end he says "either 1, etc etc; or B, etc..."?
hahahaha I've been looking and wtching for videos about noises while braking and have found nothing...until i got this one.!!!! you rock! my man!!!! i finally understand the real meaning of noising in my braking!!!!!! thanks like a F....... lot!!!!!!
Very helpful and entertaining. There's another sound though, kind of squeeeeeeeeeek but it's louder that you can actually feel on your dashboard and steering wheel.
Lovely sound effects handsome! Thanks to your video I only needed brake pads replaced, therefore saving money as well. Again, couldn't be more grateful to you!
this repair shop runs a honest bussiness and honesty is the bet policy....great thing also is that it is not just a transmission facility....If Your Car Has A Problem...This Facility "CAN" fix It !!!!!
My brakes are making the second noise you described but they are brand new ceramic and I put them in myself. I have since then about a week later double checked my brakes to make sure everything was fine and I haven't figured it out yet
ChaoticPhantasy - I had a caliper not returning back to position after pressing the brakes and the pad kind of continually rubbed against the rotor just barely. Could it be that?
Thanks for the reply. I ordered new brake discs and pads. After installation i'll see if the problem still exists. If i have worn or broken motor/transmission mounts, shouldn't i feel shaking / bumping all the time? A better way to describe the sound is like a couple of metallic springs being pushed together. It happens only when the brakes are warmed up and while braking gently, right before the care comes to a stop. If i brake hard it doesn't happen.
Hey! I bought new rotors, new brake pads, new bearings (inner & outer), & the seal. I lubricated all all the moving parts & contacts parts other than the brake pads touching the rotor. The driver side is fine but the passenger is making grinding noise that you demonstrated. I took the whole thing apart & re-examined the bearings & the bearing are fine. FYI, I packed the bearings with hi-temp grease. I put everything back together & checked to see if anything is loose & nothing is loose. Took it for a drive (1999 Dodge Ram van) & it is still making those grinding noise! Any advice other than taking it in or selling it? Went to autozone & bought the duralast gold brakes & the duralast bearings.
What if my car makes that later noise (not squeaking), but only at low speeds, 5mph or less? I can brake from 60mph and it sounds fine until I get to a very slow speed? I know i should see a mechanic, but why would this only happen at low speeds?
When i inspected the caliper(without taking it off) it looks solid not loose or hanging, the brake pad is also in good condition. The car currently has 5.1k on it. The noise is like a metal squeal, and its intermittent.
in Addition i inspected the Rotors surface it was smooth and very clean condition, they did not appear to be warped, i also observed the meat on the brake pads and as well as the condition of the Calipers and anything that looks defective or Loose...
Ok so i'm not sure if any of these apply, pretty much when I drive the car at low speeds/and come to a stop it makes this grinding noise. any idea what it could be?
It's a manual trans Vauxhall Corsa. A little European supermini. It isn't making the noise as often now, but it still makes the noise on hills, even a slight incline. Odd.
Hi Dallas! Thank you very much for your informative video. I recently spent $400 dollars on brake job (replacing brake drums & free up calibers). It is ironic that haven't heard the squeaky sound prior to the maintenance. I went back to the mechanic shop several times and the store manager test-drove it twice and told me that it should be fine. They charged me another $100 for the free up calibers brake labor, however the noise in the right front brake still hasn't gone away. Is that normal?
What about the 1st noise but only when going in reverse, pads are 80% fresh still, all new hardware when they were installed. Only makes the noise coming from passenger side while going in reverse at normal speeds , if I creep in reverse no noise. 2012 Subaru Outback 2.5
I have a 2007 silveraldo and at low speeds no brake applied , there is a loud squeak when brakes applied it stops , I suspect a bent brake back plate contacting drum , no wheel bearing noise fluids up . thx for any input
What about drum breaks in the back that are not making the squeal or the grinding sound but it’s almost like eeeerrrrrr errrrr sound. Since I can’t see the brake shoes in the drum I wounder what it could be only coming from the back and only when breaks applied.
i have 2011 chavele cruse when i reverse my car makes big noise i changed all brakes and the disce after 3 days still making the noise . what causes this? your expertise is appriciated
mahamed ali isse it sounds like it could be your quantum pads. If you lift them up and get into the hydrator piston you can see the interior of the defibrillator and just replace it and some x67 oil and you're all good.
Could you help me out with my issue I'm having with my car? Whenever my car comes to a halt from braking, it makes a metallic grunt/boom noise when the car's nose raises again after it stops. No noise when braking, just once it's come to a halt. This happens even when braking gently, and braking at extremely low speeds (eg: when braking during parking or something else where you'd be going no more than 2mph or so) Do you know what this could be?
What does it mean when you hear a grinding noise when braking after getting a car wash ? I usually get a car wash once twice a week and after a month and a half it stopped making the noise after getting a car wash. What does it mean ? My mechanic told me that the rotors are wet and it's normal for that to make noise and it's best to drive around for at least 10 minutes so the water doesn't stay on the rotors.
my new pads are metallic so they make a bit of noise when i hit the pedal but the service guy says they need a few days to get debri on them. if he they are still making noise next week i have to take it back in
I have a 1998 civic and the front right wheel has started to make a screeching noise when i turn and also when i brake. It now has stopped making the noise when i turn, so it only screeches when I brake and a couple seconds after I'm done braking. Any ideas on what this is? And estimated cost of repair?
When I'm turning left with acceleration my car makes a metal noise similar to one a train makes when slowing down.... Can someone help me? And no it's not the cv joint I know what that sounds like
@AAMCO Venice when I apply brake and when speed drops to less than 10 miles per hour while applying brakes, I hear synchronized click sound from rear. Rear brakes are drum type. What causes this? Your expertise is appreciated
thanks for the examples, what if you hear machine gun like noises as if your tyres have burst please, its not regular but intermittent, when I try to tell my mechanics they seem to not know, also sods law it doesn't happen when I have a mechanic in the car? tell me i'm not going crazy!
hi, i have a small problem with my car. after i drove my car around 15-20 minutes, weird sound came from the front driver side wheel. something like 'woooooooo'... but after i hit the brake, the sound disappear. if i make a turn, the sound disappear. when im slowing down, the sound will be louder. could you help me out?
i have a 2011 dodge grand caravan i just put new pads & rotors on front & back 2 weeks later the front is Grinding again when i press on brakes not sure why its doing it again you have any ideal what it is?
Hi, I just noted today that when I brake, I hear some kind of a air intake sound, like bhu-bhu-bhu-bhu-bhu.... towards the rear as the tires rotate. What about that sound?
I have an 03 saab 9-3 linear.. it just started making the screeching noise but it also makes a loud weird low pitch sound when i stop and slowing press the brake pedal... if i press it all the way down it does not make the sound but as i press it slow or let the pedal go slowly it makes that weird loud low pitch sound.. i know its not the brake pads because i just checked them not too long ago when i painted my calipers...what do you think the problem is?
Hi I have this annoying noise from my 98 Infiniti I30. its coming from bottom of engine I believe. i hear this sound when car is above say 40mph. its some constant thumping sound..i have video on youtube i got 4 year old slotted rotors on front. could that noise be coming from them due to their end of life? recently i got new pads in front without changing or turning the rotors. just last week or so i'm getting burning smell from wheels. thank you.
Hello, i have a similar problem like Micky Kay described with my 2001 Audi A3. Right before i stop, braking gently, it makes a bit of a bumping sound and i can feel the brake pedal pulsing a bit.
When I push the brake peddle mostly when start ups it makes the first sound u did but comes from the booster or something close to that area and goes away eventually
Theres also another sound brakes can make. That squeeeaakkk one can also mean you have glazed pads. My 99 Hilux was doing this and when we checked the pads they were almost brand new except the pad face on both sides were as shiny and slippery as glass. Once we changed them the hissing speak noise was gone.
What if you hit the brakes and hear a crashing sound then everything goes black and you get sent to the spider monkey demon hybrids with pigs and cows?
and if the car is making a sound from the front rotors while pushing the brake pedal down ... what will be the problem ? it's like a sound from both front rotors sequently when you're releasing the brake pedal ,,, but in my case I'm pushing the pedal firmly ... so who can help me to recognize the problem ?
Really appreciated! My ford fiesta 2011 does that annyoing noise at morning, then suddenly noise goes away.. will go to mechanic cuz that noise is VERY annyoing. Thx a lot!!
I just replace my front rotors and pads, and rear drums and shoes. After brakeing a few times I can hear a knocking sound coming for the rear passenger side when im going about 5-10 miles an hour, but any faster and i hear nothing. Sometimes when I brake i hear a short screching sound nothing outrageous but it makes a sound. what could these sounds be?
I have a loud clicking noise whenever i apply the breaks at about 10-15mph. Its just a single click. Idk if its the breaks because it could also be a tierod end or a cv shaft but it only doe it when i come to a complete stop from 10-15 mph
When i press my car break padal sound like tuck tuck heared so tell me what can i do and how to fix it... The sound is only hear when i press padal sound is no longer just like tuk..... Tuk... When i press
thanks for this video. I have a question: I was test driving a NEW car ( 13 Kia Forte SX) and I noticed that everytime I just press on the brake it make this loud "Thoo-Thoo"/thumping type sound. It does it also if I am just sitting in the car and the car is off . If I press on the pedal it makes this sound. Is this normal or could something be loose? I would expect the brake pedal to be quiet when pressing it... Thanks!
on my car i hear some sort of grinding sound : like "siek.. siek.. siek.. siek" and when i brake theres no sound , as soon the car is moving again i hear the sound again "siek.. siek.. siek.. siek" . what could the cause be?
1:00 I heard this sound few days ago for the first time just once..and today very short before I stoped for traffic lights!But before that there were no other sounds and warnings so I couldn't ignore it because it wasn't there before?But..that's the sound for sure..you nailed it..Is it possible that this sound and problem occure without any warning?
I'm getting a grinding like noise from the front axel when braking slowly until a complete stop. I already replace the front axel brake pads and rotors but I am still getting the same noise. I have brake drums for the rear axel but did not bother replacing those because I do not hear the sound from the rear axel.
these days, rotors are cheaper than getting them turned (in theory) because most of the time(ideally and not abused), after two brake jobs, a rotor gets turned, turning a rotor for example is 20$ a rotor, why not just toss another 10 or 20$ to the shop and get brand new ones, the shop gets more cash, you get new fat rotors (new rotors also give you a sence of "i got new stopping products, i feel safer than reusing those old 5 year old rotors) Sure you dont have to but its my 2 cents
I have a 2015 Kia Optima that I've only had for 2 months. My brakes are making more of the grinding noise u immitated when going forward as well as in reverse. Sounds like it's coming from the front and rear of the car. very difficult to pinpoint exact location while inside the car. Thoughts please... Dont understand why I'm having these kinds of problems when the behicle only had 11 miles on it when I purchased it in September 2015.
I have a 91 Jeep Cherokee and when I'm braking there's a loud popping noise coming from the front end. Why is this? The front left rotor was jst replaced about 3 weeks ago along with wheel bearings. Pads on left and right side are in good condition. If anyone knows the cause of this plz help me out. Thanks
I just did my brakes two weeks ago front ones and drove it for a week was good but the week after it started squeezing I'm like wtf I just did them what can it be please help thanks
I was NOT expecting him to imitate the brake sounds himself 😂 delightful sir, thank you
Kudos to the mechanic for staying on note and maintaining a straight face. As funny as it was to hear the noises, he was spot on.
I expected him to start cracking up after that first long squeeeeeek😂😂
squuuuuuuuueeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Lani Playz 1234 HAHAHAHA
First thing i noticed myself🤣
*earrape*
Miguel Sicangco don’t forget the kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
Hahahahaha. 😂😂😂
Dude deserves a promotion or raise for his sound effects 😂😂😂
As silly as the sound effects are, theres really no better way to thoroughly explain the noises.
True
Except, yanno, recording the brakes actually making the sound. #justsaynotobadsoundFX
Lmfao
Yup
@@gypsysnowwolf2313 yes is a word
I love this guy!!! Was really stressing about my brakes and he put a big smile on my face! Thank you for letting the silly show through!
lol his brake impersonations
What did You expect? He is a professional.
Seriously awesome video, sound imitations, and information. Thorough enough to help anyone understand while concise enough to not get boring. But, am I the only one(didnt read all comments) who noticed at the end he says "either 1, etc etc; or B, etc..."?
I had to give you a thumbs-up just for the sound effects alone. Well done.
I'm actually experiencing the second noise you made, thx so much you made things clear with your explanations
hahahaha I've been looking and wtching for videos about noises while braking and have found nothing...until i got this one.!!!! you rock! my man!!!! i finally understand the real meaning of noising in my braking!!!!!! thanks like a F....... lot!!!!!!
Very helpful and entertaining. There's another sound though, kind of squeeeeeeeeeek but it's louder that you can actually feel on your dashboard and steering wheel.
I subscribed just from his perfection of the brake noises
Lovely sound effects handsome! Thanks to your video I only needed brake pads replaced, therefore saving money as well. Again, couldn't be more grateful to you!
this repair shop runs a honest bussiness and honesty is the bet policy....great thing also is that it is not just a transmission facility....If Your Car Has A Problem...This Facility "CAN" fix It !!!!!
what if both the brake and plates are brand new and still making this screechy sound. What it could be?
My brakes are making the second noise you described but they are brand new ceramic and I put them in myself. I have since then about a week later double checked my brakes to make sure everything was fine and I haven't figured it out yet
ChaoticPhantasy - I had a caliper not returning back to position after pressing the brakes and the pad kind of continually rubbed against the rotor just barely. Could it be that?
What if I'm getting this hissing noise on my brakes? Kind of sounds like air when I let off my brakes.
mine too
Thanks for the reply. I ordered new brake discs and pads. After installation i'll see if the problem still exists.
If i have worn or broken motor/transmission mounts, shouldn't i feel shaking / bumping all the time? A better way to describe the sound is like a couple of metallic springs being pushed together. It happens only when the brakes are warmed up and while braking gently, right before the care comes to a stop. If i brake hard it doesn't happen.
Hey! I bought new rotors, new brake pads, new bearings (inner & outer), & the seal. I lubricated all all the moving parts & contacts parts other than the brake pads touching the rotor. The driver side is fine but the passenger is making grinding noise that you demonstrated. I took the whole thing apart & re-examined the bearings & the bearing are fine. FYI, I packed the bearings with hi-temp grease. I put everything back together & checked to see if anything is loose & nothing is loose. Took it for a drive (1999 Dodge Ram van) & it is still making those grinding noise! Any advice other than taking it in or selling it? Went to autozone & bought the duralast gold brakes & the duralast bearings.
What if my car makes that later noise (not squeaking), but only at low speeds, 5mph or less? I can brake from 60mph and it sounds fine until I get to a very slow speed? I know i should see a mechanic, but why would this only happen at low speeds?
Mine is doing the same
Mine is too
Doesn't he look like Alan from "2 and a half man"? Especially, every sound he makes! 😂😂😂😂😂
When i inspected the caliper(without taking it off) it looks solid not loose or hanging, the brake pad is also in good condition. The car currently has 5.1k on it. The noise is like a metal squeal, and its intermittent.
Typical AAMCO worker. Just like the ones from the AAMCO commercials that can mimic the noises from the cars. Good job!! Lol.
that first one you mentioned brake noise is what I have I just replaced all four brakes in July 2015.
They probably gave you low quality breaks.
amazing sound effects on this.
in Addition i inspected the Rotors surface it was smooth and very clean condition, they did not appear to be warped, i also observed the meat on the brake pads and as well as the condition of the Calipers and anything that looks defective or Loose...
I've just had my breaks sorted. Thanks for the video! But I'm so sorry, I found the noises hilarious haha
Excellent noise bro, thanks for sharing info :)
#kudos
My front driver break sounds like im running over sticks crunching when i back up, and breaking going forward it clicks and makes the same noise?
Ok so i'm not sure if any of these apply, pretty much when I drive the car at low speeds/and come to a stop it makes this grinding noise. any idea what it could be?
It's a manual trans Vauxhall Corsa. A little European supermini. It isn't making the noise as often now, but it still makes the noise on hills, even a slight incline. Odd.
Seriously made my day
Hi Dallas! Thank you very much for your informative video. I recently spent $400 dollars on brake job (replacing brake drums & free up calibers). It is ironic that haven't heard the squeaky sound prior to the maintenance. I went back to the mechanic shop several times and the store manager test-drove it twice and told me that it should be fine. They charged me another $100 for the free up calibers brake labor, however the noise in the right front brake still hasn't gone away. Is that normal?
I dont know
What about the 1st noise but only when going in reverse, pads are 80% fresh still, all new hardware when they were installed. Only makes the noise coming from passenger side while going in reverse at normal speeds , if I creep in reverse no noise. 2012 Subaru Outback 2.5
I have a 2007 silveraldo and at low speeds no brake applied , there is a loud squeak when brakes applied it stops , I suspect a bent brake back plate contacting drum , no wheel bearing noise fluids up . thx for any input
What if I don’t hear any sounds at all period but my steering wheel has started to shake as I stop?
Gotta appreciate the noise recreations 😅
What do you hear the dragging noise with brand new brakes? I was sold something called 100% metal brakes?
What about drum breaks in the back that are not making the squeal or the grinding sound but it’s almost like eeeerrrrrr errrrr sound. Since I can’t see the brake shoes in the drum I wounder what it could be only coming from the back and only when breaks applied.
i have 2011 chavele cruse when i reverse my car makes big noise i changed all brakes and the disce after 3 days still making the noise . what causes this? your expertise is appriciated
mahamed ali isse it sounds like it could be your quantum pads. If you lift them up and get into the hydrator piston you can see the interior of the defibrillator and just replace it and some x67 oil and you're all good.
If the pad and rotor are good in 99 chevy malibu and still hear the second noise you demonstrated.so what can be the problem? Thanks
How do those noises sound again?
My brakes are making a minor grind when going below 20kmph anything above tthat its fine after driving for a couple of hours it goes away?
Could you help me out with my issue I'm having with my car? Whenever my car comes to a halt from braking, it makes a metallic grunt/boom noise when the car's nose raises again after it stops. No noise when braking, just once it's come to a halt. This happens even when braking gently, and braking at extremely low speeds (eg: when braking during parking or something else where you'd be going no more than 2mph or so) Do you know what this could be?
What does it mean when you hear a grinding noise when braking after getting a car wash ? I usually get a car wash once twice a week and after a month and a half it stopped making the noise after getting a car wash. What does it mean ? My mechanic told me that the rotors are wet and it's normal for that to make noise and it's best to drive around for at least 10 minutes so the water doesn't stay on the rotors.
Never wash your car/wheels right after you made a trip with lot of braking,meaning hot brakes!Cold water on your hot rotors is recipe for disaster..
This guys gotta be a transformer to have those sounds down so well
my new pads are metallic so they make a bit of noise when i hit the pedal but the service guy says they need a few days to get debri on them. if he they are still making noise next week i have to take it back in
I have a 1998 civic and the front right wheel has started to make a screeching noise when i turn and also when i brake. It now has stopped making the noise when i turn, so it only screeches when I brake and a couple seconds after I'm done braking. Any ideas on what this is? And estimated cost of repair?
You make the perfect sounds.
When I'm turning left with acceleration my car makes a metal noise similar to one a train makes when slowing down.... Can someone help me? And no it's not the cv joint I know what that sounds like
all oem parts, im hearing intermittent metal squeal noise when in reverse only. can you list some possible cause, so i can narrow it down?
@AAMCO Venice when I apply brake and when speed drops to less than 10 miles per hour while applying brakes, I hear synchronized click sound from rear. Rear brakes are drum type. What causes this? Your expertise is appreciated
i just had my pads and rotors done and they're still squeaking
I hear a clunk when I back up slow and then break easy. Honda CR-V 2007. What is it????
thanks for the examples, what if you hear machine gun like noises as if your tyres have burst please, its not regular but intermittent, when I try to tell my mechanics they seem to not know, also sods law it doesn't happen when I have a mechanic in the car? tell me i'm not going crazy!
2-3 days ago my brakes suddenly started making the 2nd sound in this video, but I never heard the warning squeak he says you should hear first, why?
because your pads didn't come with wear indicators, always try to buy pads with built in wear indicators
Mine too 😣
hi,
i have a small problem with my car. after i drove my car around 15-20 minutes, weird sound came from the front driver side wheel. something like 'woooooooo'... but after i hit the brake, the sound disappear. if i make a turn, the sound disappear. when im slowing down, the sound will be louder. could you help me out?
I hear a light tapping sound when I apply the brakes.Do you know what it is?
i have a 2011 dodge grand caravan i just put new pads & rotors on front & back 2 weeks later the front is Grinding again when i press on brakes not sure why its doing it again you have any ideal what it is?
THANK YOU FOR JUST TAKING THE TIME TO MAKE THIS VIDEO AND HELP...GOD BLESS....DR MD
Hi, I just noted today that when I brake, I hear some kind of a air intake sound, like bhu-bhu-bhu-bhu-bhu.... towards the rear as the tires rotate. What about that sound?
How about the screech noise when i release the brake? I checked the fluid and it’s above MIN level.
@AAMCOVenice my car only its a light high pitch soung while driving when brakes are applied the sound stops
I have an 03 saab 9-3 linear.. it just started making the screeching noise but it also makes a loud weird low pitch sound when i stop and slowing press the brake pedal... if i press it all the way down it does not make the sound but as i press it slow or let the pedal go slowly it makes that weird loud low pitch sound.. i know its not the brake pads because i just checked them not too long ago when i painted my calipers...what do you think the problem is?
Hi
I have this annoying noise from my 98 Infiniti I30. its coming from bottom of engine I believe. i hear this sound when car is above say 40mph. its some constant thumping sound..i have video on youtube
i got 4 year old slotted rotors on front. could that noise be coming from them due to their end of life? recently i got new pads in front without changing or turning the rotors. just last week or so i'm getting burning smell from wheels.
thank you.
Hi , went I hit my brake I have one sound is like CLACK only one time , what is ? Any idea ?
I am having the same issue at present.....I think its a brake caliper
This guy nailed it.
Mine is making air noise when I put on foot on the break what is that mean pls?
Hello, i have a similar problem like Micky Kay described with my 2001 Audi A3. Right before i stop, braking gently, it makes a bit of a bumping sound and i can feel the brake pedal pulsing a bit.
i have bnew car bought this april 2021 and only 2k of running .. but when i brake theres a whistling noise but sometines none
When I push the brake peddle mostly when start ups it makes the first sound u did but comes from the booster or something close to that area and goes away eventually
I just got new front brakes and when I apply or release them I hear a clunking sound - what is that? And it's loud too.
But what about a whistling sound when your aren’t pressing breaks and it then goes away when breaks are pressed
Theres also another sound brakes can make. That squeeeaakkk one can also mean you have glazed pads. My 99 Hilux was doing this and when we checked the pads they were almost brand new except the pad face on both sides were as shiny and slippery as glass. Once we changed them the hissing speak noise was gone.
lolol you did great sounds and this video was very helpful, thank you thank you
What if you hit the brakes and hear a crashing sound then everything goes black and you get sent to the spider monkey demon hybrids with pigs and cows?
and if the car is making a sound from the front rotors while pushing the brake pedal down ... what will be the problem ? it's like a sound from both front rotors sequently when you're releasing the brake pedal ,,, but in my case I'm pushing the pedal firmly ... so who can help me to recognize the problem ?
Really appreciated! My ford fiesta 2011 does that annyoing noise at morning, then suddenly noise goes away.. will go to mechanic cuz that noise is VERY annyoing. Thx a lot!!
Luis V well, your first problem is that its a Ford😅😅..(no pun intended)
I just replace my front rotors and pads, and rear drums and shoes. After brakeing a few times I can hear a knocking sound coming for the rear passenger side when im going about 5-10 miles an hour, but any faster and i hear nothing. Sometimes when I brake i hear a short screching sound nothing outrageous but it makes a sound. what could these sounds be?
I have a loud clicking noise whenever i apply the breaks at about 10-15mph. Its just a single click. Idk if its the breaks because it could also be a tierod end or a cv shaft but it only doe it when i come to a complete stop from 10-15 mph
I have the second noise with new pads?
When i press my car break padal sound like tuck tuck heared so tell me what can i do and how to fix it... The sound is only hear when i press padal sound is no longer just like tuk..... Tuk... When i press
I just got new brake pads put on a few days ago I am hearing a noise underneath my driver side I don’t know it is.
thanks for this video. I have a question: I was test driving a NEW car ( 13 Kia Forte SX) and I noticed that everytime I just press on the brake it make this loud "Thoo-Thoo"/thumping type sound. It does it also if I am just sitting in the car and the car is off . If I press on the pedal it makes this sound. Is this normal or could something be loose? I would expect the brake pedal to be quiet when pressing it... Thanks!
on my car i hear some sort of grinding sound : like "siek.. siek.. siek.. siek" and when i brake theres no sound , as soon the car is moving again i hear the sound again "siek.. siek.. siek.. siek" . what could the cause be?
Hey i just replaced my brake pads and rotors all fine for a couple a days and know when i brake i can hear grinding.. any idea what it could be??
no noise on brake but a klunk i get
1:00 I heard this sound few days ago for the first time just once..and today very short before I stoped for traffic lights!But before that there were no other sounds and warnings so I couldn't ignore it because it wasn't there before?But..that's the sound for sure..you nailed it..Is it possible that this sound and problem occure without any warning?
VERY VERY HELPFUL! Thanks a ton! :)
what if it does a vibrating noise when driving?
A: Those are some simple true facts that people should be aware of
I'm getting a grinding like noise from the front axel when braking slowly until a complete stop. I already replace the front axel brake pads and rotors but I am still getting the same noise. I have brake drums for the rear axel but did not bother replacing those because I do not hear the sound from the rear axel.
these days, rotors are cheaper than getting them turned (in theory)
because most of the time(ideally and not abused), after two brake jobs, a rotor gets turned, turning a rotor for example is 20$ a rotor, why not just toss another 10 or 20$ to the shop and get brand new ones, the shop gets more cash, you get new fat rotors (new rotors also give you a sence of "i got new stopping products, i feel safer than reusing those old 5 year old rotors)
Sure you dont have to but its my 2 cents
how about a clunk clunk clunk and car shakes when braking?
i have a 13' mustang gt, rear passenger brake squeal on and off(with or without brake) only in reverse. any ideas?
I have a 2015 Kia Optima that I've only had for 2 months. My brakes are making more of the grinding noise u immitated when going forward as well as in reverse. Sounds like it's coming from the front and rear of the car. very difficult to pinpoint exact location while inside the car. Thoughts please... Dont understand why I'm having these kinds of problems when the behicle only had 11 miles on it when I purchased it in September 2015.
You should go Kia agency, or where you bought it from. The car is too new to be making that noise.
Could just be a pebble my dude
Can you make a video of engine noises....
I have a 91 Jeep Cherokee and when I'm braking there's a loud popping noise coming from the front end. Why is this? The front left rotor was jst replaced about 3 weeks ago along with wheel bearings. Pads on left and right side are in good condition. If anyone knows the cause of this plz help me out. Thanks
I just did my brakes two weeks ago front ones and drove it for a week was good but the week after it started squeezing I'm like wtf I just did them what can it be please help thanks