To be clear, I may be reading it wrong, your website seems to insinuate that this is only for metal frames. If your make one that will fit my Walther PDP Pro X Compact POLYMER frame I will buy one. Merry Christmas!
Hi! If you need our help with taking the slide off, please email us at info@blacksteelusa.com so we can send you a video to help you. Always here to help!
Having trouble popping the other side on. Pushed the pin through to thumb rest side but other won't lock. Don't wanna risk damage to the frame. Any suggestions?
Of course! Not a problem! Our chief designer will make you a video to show the install better. Please email us info@blacksteelusa.com so we can send it to you there.
Since the Grip Control replaces the take down level, you should have no issue there what-so-ever. It uses the same slide release travel as the original.
@@BlackSteelUSA I figured as much. I have a few grip controls on a few different firearms. The PDP was the only one I had any concerns with. Thanks for taking the time to reply. Love what you guys bring to the market :)
one concern I have after installation is, why does it not sit tight on the frame is it due to the roll pin not sticking out and touching the grip? My grip wiggles side to side quite a bit. I'm sure its something on my end because I installed one on my M&P with no issue. please advise?
Hi! They are the Truglo Tritium Pro Suppressor-Height Night Sights. gunmagwarehouse.com/truglo-tritium-pro-suppressor-height-night-sights-for-glock-mos-pistols-in-10mm-45acp.html
Hi! The roll pin serves as a physical stop for the Grip Control, and by moving it, it latches it onto the Grip Control. It stops it from moving too far forward, just extra insurance.
@@BlackSteelUSA thank you! Will grip control still work without the roll pin protruding out? The roll pin on my PDP seems to be very persistent and won’t move any further after about 1/32 of an inch
I'm right handed, my support hand is my left hand.. According to your website I choose my "gas pedal" based upon my support hand.. therefore I chose LEFT.. I hope I chose correctly..
Hi! The short answer is yes, as long as the total width of the firearm is not greater than 1- 5/8 inches. IDPA and USPSA have a “box” they put the pistol in to determine if the gun is within guidelines. So, that is the ultimate test.
Will buy the ppq45 version as soon as i see it launched.🙏
Awesome! We'll keep you updated.
To be clear, I may be reading it wrong, your website seems to insinuate that this is only for metal frames.
If your make one that will fit my Walther PDP Pro X Compact POLYMER frame I will buy one.
Merry Christmas!
Hi! Thanks for the prompt, we'll update the website to be clearer. The PDP Grip Control is compatible with BOTH metal frames and Poly frames.
Thanks I was sitting there after the install going, how the hell do I take off the slide now.
Hi! If you need our help with taking the slide off, please email us at info@blacksteelusa.com so we can send you a video to help you.
Always here to help!
I got one for the pdp, and 2 for my glocks. Love em.
Hi! Thank you so much!
Having trouble popping the other side on. Pushed the pin through to thumb rest side but other won't lock. Don't wanna risk damage to the frame. Any suggestions?
Of course! Not a problem! Our chief designer will make you a video to show the install better. Please email us info@blacksteelusa.com so we can send it to you there.
I want this for my PDP. I'm concerned that I may accidentally pop the slide off while firing the PDP. The slide release requires little travel.
Since the Grip Control replaces the take down level, you should have no issue there what-so-ever. It uses the same slide release travel as the original.
@@BlackSteelUSA I figured as much. I have a few grip controls on a few different firearms. The PDP was the only one I had any concerns with. Thanks for taking the time to reply. Love what you guys bring to the market :)
I wonder if this fits the ppq 45
Hi! Not currently, but we have it on our interest list and will keep you posted when we launch it!
@BlackSteelUSA thanks for the response! I've got a PPQ 9mm, and your gas pedal is innovative and cool! Can't wait to try it out.
Thanks I will buy when launched @@BlackSteelUSA
Nice implementation, easy install. Side note, what optic plate are you using?
Hi! Thanks! It's something we made because we couldn't find it at the time to purchase.
@BlackSteelUSA gotcha, thanks!
Thanks
one concern I have after installation is, why does it not sit tight on the frame is it due to the roll pin not sticking out and touching the grip? My grip wiggles side to side quite a bit. I'm sure its something on my end because I installed one on my M&P with no issue. please advise?
Hi! We replied to your email. Reach out if you have any more questions! We are always happy to help!
Yes you did and I greatly appreciate you for doing so problem fixed with your guidance. I highly recommend your company for the gas pedal
What is the name of the irons you display in the video
Hi! They are the Truglo Tritium Pro Suppressor-Height Night Sights.
gunmagwarehouse.com/truglo-tritium-pro-suppressor-height-night-sights-for-glock-mos-pistols-in-10mm-45acp.html
Please tell me you make these for HK’s! (P30, HK45, USP 9)
Hi! We will! We will add these to our interest list on work on them as soon as possible.
Whats the purpose of
moving the roll pin?
Hi! The roll pin serves as a physical stop for the Grip Control, and by moving it, it latches it onto the Grip Control. It stops it from moving too far forward, just extra insurance.
@@BlackSteelUSA thank you! Will grip control still work without the roll pin protruding out? The roll pin on my PDP seems to be very persistent and won’t move any further after about 1/32 of an inch
@@BlackSteelUSA nvm, just saw your email. Thank you!
Please tell me this comes in black
Hi! Yes it does! We have in the gold just to showcase it better on our website and on our install video. BUT yes, all our Grip Controls are black.
I'm right handed, my support hand is my left hand.. According to your website I choose my "gas pedal" based upon my support hand.. therefore I chose LEFT.. I hope I chose correctly..
@@WettDoggTV that's correct
Is this uspsa carry optics legal?
Hi! The short answer is yes, as long as the total width of the firearm is not greater than 1- 5/8 inches. IDPA and USPSA have a “box” they put the pistol in to determine if the gun is within guidelines. So, that is the ultimate test.
Does this fit on the pdp f
YES! Here's a link: blacksteelusa.com/product/walther-pdp/
Does this fit the pdp sd pro
Hi! Yes it does.