DJI AVATA UPGRADE AXIS FLYING 3.5" KIT || FULL TUTORIAL

Sebelum avata di upgrade ke AXIS FLYING 3.5" KIT
perlu anda ketahui...
1.usb type C tidak akan bisa lagi terkoneksi dengan OTG android ataupun ios,tetapi jangan kuatir tetap usb type C di aircraft masih bisa terkoneksi melalui PC atau NOTEBOOK atau MACBOOK
2.slot MICRO SD tidak akan / sulit keluar masuk bila propeller guard axis flying 3.5" tidak anda modifikasi ( di buat congkaan ),tetpi setelah anda congkakkan sedikit maka micro sd bisa keluar masuk dengan semestinya.
#axisflying
#djiavata
#djifpv
#dji

[@politutoriales3211]

saludos hermano, cambiar solo los motores? Seria una buena opcion? o es mejor cambiar todo? Gracias

[@federicozaminato]

Wow, Thank you so much for this fantastic tutorial. Following I managed to do everything right. But I have a question, is it normal for the SD card to be difficult to insert and remove? there is not enough space with the duct. Thank you

[@sebastianzya1812]

Hi I did everything as in the video and I have battery error. "Battery instaled incoretly". What i did wrong. A soldered the conector like
In video

[@sangio8208]

Thank you for the tutorial, everything seemed to have gone well but I have a problem. the 4 motors do not respond, but the drone turns on and responds to the viewer and controller. do you have some advice? Thank you

[@nnplaystation]

Ok brother....thanks

[@sangio8208]

@@nnplaystation do you know why the engines don't start? what could I have done wrong

[@michaelfarber6411]

Was is das für ein blaues Zeug eigentlich?

[@SL-FPV]

Hi bro, how much will cost?

[@rexonfuentes4250]

I cant remoce the motor in solder? What temp should i do to

[@nnplaystation]

you should at least use a 40watt soldering iron or above... using a 60watt soldering iron is much better and will make your work easier

[@nnplaystation]

you should at least use a 40watt soldering iron or above... using a 60watt soldering iron is much better and will make your work easier

[@rexonfuentes4250]

I have 60 watts but still nothing? Pls help me

[@rexonfuentes4250]

Should i remove the blue paste before remove the solder?

[@nnplaystation]

@@rexonfuentes4250 If you're sure it won't make the blue thermal paste disappear or become dirty or decrease or become destroyed, it's best not to clean it... but if you take blue thermal paste, don't forget that you have to return the thermal paste properly and correctly... because thermal paste is very important to reduce heat from the MOSFET to the aluminum cooler.

[@DrFrantic77]

Thanks for sharing

[@nnplaystation]

@@DrFrantic77 ok

[@muhammadrezza5887]

Bg kalo udah upgrade frame terus masi bisa pakai memory card ngga

[@nnplaystation]

Thanks mas atas pertanyaannya...sebenernya gak bakalan bisa mas...usb c juga gak bakalan bisa ke otg hp lagi...tapi usb c tetap bisa konek ke pc atau laptop....
Nah ntuk ngakalin itu semua agas berfungsi seperti bawaan aslinya harus di modif di congkak framenya mas...tapi ingat harus hati hati teliti dan pelan pelan...
Ada beberapa pelanggan saya yang sudah saya buatkan dan berfungsi seperti awal aslinya....memori bisa di pakai keluar masuk dan usb c bisa ke otg hp dan ke laptop dan pc

[@motion.tomcat]

Usb-c connector doesn't work(((

[@ERGE-yg4id]

what temperature should be for soldering ?

[@시커먼선생Mr.Blackman]

Thank you for the good teaching. Subscribe

[@diecomedyzockerbutterbrot522]

Mega tutorial 🫶

[@nnplaystation]

Thanks 🥰

[@felixlange4612]

Super ! Step by step 🎉

[@nnplaystation]

Thanks ☺️ 🥰

[@ROSSANA247]

Magnífico trabalho 👍

[@nnplaystation]

Thanks

[@menyoxfpv9666]

Mantabbb

[@nnplaystation]

Terimakasih om...🥰

[@arifrifai30]

Di tunggu tes fly ny omm

[@nnplaystation]

Saya hanya perakit om...punya saya sendiri masih original bawaan avata om...mau upgrade nantilah tunggu yang kasih gratisan...
Dan memang masih menunggu,masih di usahakan katanya...hehehe

[@taufiknurhidayat109]

Ongkos pasang frame berpa ya mas?

[@nnplaystation]

Saya mungkin jauh lho mas tempat saya dari tempat mas...saya di batam mas

[@nnplaystation]

Kalau mau tanya langsung ke wa aja ya mas...
Ini no wa saya 081325201992 agus

[@markadrianpadua5548]

Bro what are those blue paste you used?

[@nnplaystation]

The use of blue paste is so that the heat produced by the IC/module can conduct well to the iron/heatsink/body so that the heat can be stable or the heat can quickly decrease due to exposure to wind.

[@markadrianpadua5548]

Thanks for replying me bro! What if I use normal thermal paste is that ok? Thank you!

[@markadrianpadua5548]

By the way, you did well bro! Super clean. I will do the same. 😊

[@nnplaystation]

@@markadrianpadua5548 wow...perfecto 👍👍👍👍👍

[@markadrianpadua5548]

Can you tell me what paste is that? So I can buy also. 🙂​@@nnplaystation

[@ikhsandfc]

Sapa punya ini om 😢

[@nnplaystation]

Punya orang singapur om....

[@nnplaystation]

Bentar lagi punya om beredar...heheh