😊😊😊 Gosto de coisas sóbrias! Adorei esses trabalhos! Sem toneladas de glitter, Pink, e montes de coisas que outros adoram colocar, tornando as peças muito bregas! Parabéns.
I have been using Aquacast and like others have been getting smudgy marbling. I will try your technique and it is nice to have such an informative video on this subject, thank you.
Thank you for this. I've been struggling with getting proper marbling. I couldn't figure out why I was getting tiny little ribbons and smudgey coloring. Now I understand why!!
I use Elichem products and have very recently started experimenting with Hydroflow 😀. So far I've just made a few terrazzo style coasters and one coaster where I layered the colours ( bit like dirty cup acrylic pour ). I have the Elichem sealer. It is the liquid part of the Hydroflow, I believe, and gives a soft sheen appearance to the finished piece. If using it for coasters 5-6 layers of the sealer are needed, each layer spaced 2-3 hours apart. I didn't use an electric whisk to mix Hydroflow, just a hand held whisk and a wooden stick. I did get a few bubbles but no lumps and mixture was very smooth 😀.
I have just found this video as it was on my recommended list and I'm so glad I did. I am very new to jesmonite, unfortunately I'm running out and need to order more, sadly there's a shortage, but thanks to you I have just placed an order for the hydroflow and I used your code too, a huge thank you for that. I can't wait to try it out. Needless to say, I am now a new subscriber to your channel.
You get the bubbles and lumps out by not shoving all the powder into the liquid. Put a little powder in and mix with the jesmonite blade ... slowly incorporate the powder ... done, a nice smooth even consistency.
Hi everyone, Sorry I haven’t posted anything recently but I’ve been in the process of packing everything up because we are shortly moving home. This will give me extra room to build a proper studio to work from. Soon as I’ve set up I will be posting more videos for you to enjoy and learn from. Lainey. 💕
That was incredibly helpful! Thank you so much for sharing all your tips and tricks! Hope you will be able to show us more techniques to pouring for the marble effect :)
You can buy moulds from lots of Different places. I tend to buy mine from Ali express or Etsy and you can also get them from eBay. As long as they’re suitable you can use moulds that refer to being used with resin. I hope this helps. You need to buy moulds that are made of silicone soft rubber so that you can peel it away from the cast. Pinkiemolds on Etsy do some good ones and serenity sculptures. Also Devon Dotting make moulds too.
This is super helpful! You said that you clean your stick blender in a pot of water straight away, I was just wondering if you dispose of the water down the sink?
Such a great video, I love your colour palette and patterns. I have just bought myself a beginners jesmonite kit. Can I ask where you got your moulds from? And how do you seal your items so that they are waterproof (if you want to use them as plant pots)? Thank you
Thanks for sharing your process! How did you get the yellow oxide pigment to be so runny? Mine came solidified and I've heard lots of others face the same issue.
So from watching you here, some jesmonite products are intermixable with the hydroflow? i.e you used the retarder and pigments? Thank you for this video - I'm in Australia and thinking of giving hydro a try as Jesmonite is not in stock anywhere :)
You are amazing and you explain everything very clearly and transparently ♥️. They are fabulous ❤❤
😊😊😊 Gosto de coisas sóbrias! Adorei esses trabalhos!
Sem toneladas de glitter, Pink, e montes de coisas que outros adoram colocar, tornando as peças muito bregas!
Parabéns.
I have been using Aquacast and like others have been getting smudgy marbling. I will try your technique and it is nice to have such an informative video on this subject, thank you.
Protect it from resin8 was elichems sealant. elichem supplied everything to resin8
Beautiful work!
Thank you so much.Please give us more video,you are a talented artist
What a great tutorial! Thank you so much for sharing 😀. And everything came out beautifully!
Absolutely love the colours, very impressed 👌
Thank you 😊
Thank you for this. I've been struggling with getting proper marbling. I couldn't figure out why I was getting tiny little ribbons and smudgey coloring. Now I understand why!!
Glad this helped. I must find time to do some more. X
I use Elichem products and have very recently started experimenting with Hydroflow 😀. So far I've just made a few terrazzo style coasters and one coaster where I layered the colours ( bit like dirty cup acrylic pour ). I have the Elichem sealer. It is the liquid part of the Hydroflow, I believe, and gives a soft sheen appearance to the finished piece. If using it for coasters 5-6 layers of the sealer are needed, each layer spaced 2-3 hours apart.
I didn't use an electric whisk to mix Hydroflow, just a hand held whisk and a wooden stick. I did get a few bubbles but no lumps and mixture was very smooth 😀.
Thank you so much for this great video and information! You share so effortlessly I appreciate all of your learnings!!!
I have just found this video as it was on my recommended list and I'm so glad I did. I am very new to jesmonite, unfortunately I'm running out and need to order more, sadly there's a shortage, but thanks to you I have just placed an order for the hydroflow and I used your code too, a huge thank you for that. I can't wait to try it out. Needless to say, I am now a new subscriber to your channel.
Thank you for your comment. Glad it helped. Any questions just ask xx
You get the bubbles and lumps out by not shoving all the powder into the liquid. Put a little powder in and mix with the jesmonite blade ... slowly incorporate the powder ... done, a nice smooth even consistency.
Hi everyone, Sorry I haven’t posted anything recently but I’ve been in the process of packing everything up because we are shortly moving home. This will give me extra room to build a proper studio to work from. Soon as I’ve set up I will be posting more videos for you to enjoy and learn from. Lainey. 💕
They all turned out fabulous. Love them. Where did you get the molds from or do you have links?
That was incredibly helpful! Thank you so much for sharing all your tips and tricks! Hope you will be able to show us more techniques to pouring for the marble effect :)
I definitely must find time. X
So butifull
How does Hydroflow and Jesmonite differ to Plaster of Paris please? I'm guessing the two former products contain some kind of polymer?
Thank you, that is great. But I am from Nigeria, please can you give me the name of the items.
please can you tell me which color you use i need it , please reply me
Which is stronger? Jesmonite, hydroflow, aquacast, resincrete? Had anyone done a drop test?
How you make colours..?
Boa tarde e trabalho de gesso?
great designs congratulations 😊 is the powder you use polyester powder I use polyester it freezes so fast and I can't keep up when coloring
This is very helpful. However my jesmonite mixture turns very frothy. Why does this happen and how can I avoid this?
I’ve never experienced that with Jesmonite. Have I tried mixing like ive demonstrated on the video?
Hello, this is very helpful. However my jesmonite mixture turns quite frothy. Why does this happen and how can I avoid this?
Does it have different designs.. the mod
Hi girl I want to know what u use for this tell me the color name ao al material plz thank u
Brilliant video, thanks for the explanation 😊 Can I please ask where you got this mold from ? Thank you.
That was satisfying to watch🤩😍😍😍, may I know from where I can get the molds ?
You can buy moulds from lots of Different places. I tend to buy mine from Ali express or Etsy and you can also get them from eBay. As long as they’re suitable you can use moulds that refer to being used with resin. I hope this helps. You need to buy moulds that are made of silicone soft rubber so that you can peel it away from the cast. Pinkiemolds on Etsy do some good ones and serenity sculptures. Also Devon Dotting make moulds too.
What make is the stick blender please? xx
This is super helpful! You said that you clean your stick blender in a pot of water straight away, I was just wondering if you dispose of the water down the sink?
Yes I do. I wash it down with water so it dilutes
There aren’t any chemicals in Hydroflow it’s water based. X
Really interesting thank you.
Thank you for your comment.
Hello great work i love it ✨
How can i prevent the jesmonite from hardening so fast , it start to over hardening while am in the beginning?
You need to add retarder which you can get from most places that sell Jesmonite x
Such a great video, I love your colour palette and patterns. I have just bought myself a beginners jesmonite kit. Can I ask where you got your moulds from? And how do you seal your items so that they are waterproof (if you want to use them as plant pots)? Thank you
I seal them with Polyvine Wax vanish and after that I spray the insides with an acrylic vanish for extra protection.
Hi, these are gorgeous, can you tell me where you got the large mold please
I got that one from Pinkiemolds on Etsy x
Can I ask you where you buy your molds please
I got from Pinkiemolds on Aliexpress or Etsy.
WoW how nice! :) i know the basic colors that you use, but how do you get that brown! ☺️ do you make it yourself?
Yes I made it myself. Thank you
Where is the mold from I need thick ones like that! I live in The United States
These are from Pinkiemold on Etsy.
Thank you so much , because I was gonna actually make them
Where do you get your molds please?
Beautiful creations, lots of great information ♥️
Thank you for sharing!
Also could you please tell me where is this triangle tray mould from? 😊
I got them from Etsy
Pinkiemolds from Etsy and they are on Aliexpress too.
Love this，I do cement, welcome to exchange ideas.
This material give a much smoother finish plus you can do patterning with it. Give it a try. Code for 15% discount on Hydroflow is lainey15
@@elanehomestudio-laineyneal7499 I couldn't buy this material at my country, only substitute.
These are beautiful. Are you only able to use pigments to color this?
No u can use, acrylic paint or Mica. However they come out lighter, more washed out but still work perfectly well. X
Hi great tips tyvm for sharing! Hope you don't mind me asking but where did you get your braided molds from? Tyvm
I buy most of my moulds from Aliexpress
Pinkiemold Store are good on Aliexpress and Etsy.
Do you mind sharing the link? Thanks!
@@loisln if it’s the link for the braided moulds. These were from www.goldlineartistry.com/
The tray mould is from Pinkiemolds on Etsy.
Thanks for sharing your process! How did you get the yellow oxide pigment to be so runny? Mine came solidified and I've heard lots of others face the same issue.
Yes, I've had this issue too, also with terracotta!
I use the yellow oxide pigment from Jesmonite.
@@elanehomestudio-laineyneal7499 mine is Jesmonite too, but pretty solid! Probably a bad batch
@@elenaalexi I use the Jesmonite yellow oxide. X
I’ve never had a problem with it. Maybe add a bit more liquid and less colour.
🤩🤩🤩🤩😍😍😍😍❤
What types of pigments are you using again? Are they regular jesmonite pigments?
They are Jesmonite pigments but you can add acrylic paint or mica.
What's the name of the mod ?
From where did you buy the tray mound
Sorry the tray mold is from Pinkiemold store on Etsy. 👍
Nice
Where did you buy the molds??
From Goldline Artistry
Etsy
So from watching you here, some jesmonite products are intermixable with the hydroflow? i.e you used the retarder and pigments? Thank you for this video - I'm in Australia and thinking of giving hydro a try as Jesmonite is not in stock anywhere :)
Use the code Lainey15 to get 15% off. X