ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
CNC router lead screw to rack and pinion upgrade
ฝัง
- เผยแพร่เมื่อ 19 เม.ย. 2020
- Modifying an old lead screw machine to rack and pinion drive system. More of a "my findings" video than a how-to. I apologize for not filming the conversion, but it was pretty straightforward.
I did lose a little travel with this upgrade, but I'm working on a solution for that as well.
Also, I misspoke, I meant to say counterbored and I said countersunk. Potato potato...
the steel channel is genius
Super cheap, cuts easily with snips, quick hole through it and it mounts anywhere with a T nut, screw and a fender washer 👌👌
Does the linear motion system deliver good accuracy?
It's plenty accurate for what I use it for
4:07 beatbox skill
😆😆😆
Thanks for the video. I can't find the kit or CNC Router Parts online. Do you have a link?
Avidcnc.com
I have the same setup and I am having backlash problems. I've tried Adjusting things MANY times and still cannot seem to get perfect circles. Any help is appreciated, Thanks!
What controller are you using?
Pitch of rack and pinion for a best performance? Bro
I couldn’t find it on Lowe’s site
www.lowes.com/pd/2-5-in-W-x-120-in-L-x-1-25-in-D-Protrak-Galvanized-Steel-Stud/999990046?cm_mmc=shp-_-c-_-prd-_-bdm-_-google-_-lia-_-102-_-gypsumaccessories-_-999990046-_-0&placeholder=null&ds_rl=1286981&gclid=CjwKCAiAsaOBBhA4EiwAo0_AnL-MJ_gi5UyEvL0Rudnzw6iBXooLmvyHwAhTWxf0z7HYF6lEV_O_mxoCkvEQAvD_BwE&gclsrc=aw.ds
Rack and pinion module?
These are the parts i used
www.avidcnc.com/standard-rack-and-pinion-drive-nema-23-p-50.html
@@TheFeralEngineer it doesnt show what module has rack and pinion, and pinion number teeth