I bought that one it didn't work for me but i ended up using a slightly different version. Thanks for making this video you got me on the right track and saved me a bunch of time!
it took me 3 weeks, after a lot of search, and reading youtube comments, some guy talked about " pwm " but he dindt say how he manege to make it works.
there are 3 part of this video, this is part 1 , before commentting it dont work took me 3 weeks of research, diging in youtube comment to find this solution, by chance i saw a comment about pwm, i had to go search on amazon for one to dc voltage www.amazon.ca/gp/product/B08GP7JXVH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 There is 4 wire going to the fan, the middle wires, give 12v dc alway, and a third wire who gave order to fan to run or not. Its 0.6vdc when fan is Off , 1.63vdc when fan is On. This call Pwm signal. The 4 wire, we dont need it, it tell the bord when the fan is on. SO the thirs wire is vall PWM signal. After weeks of research and reading TH-cam comment from lg linear compressor to conventional. A guy said he manage to make it work with a pwm, and solid state relay BUT he didn't show, tell how. Find a pwm to dc , a solid state wire Dc ( 3v dc to 24v dc ) to Ac. Very important, my pwm board only put out 4.23v dc a the SSR will convert that to AC. After all that the compressor start with the fan.
To do that i build a circuit a filter rc low step, only cost around 2dlls to build , i used 380ohms 1/4w resistor, 47uf 16v capacitor, 2n2222a transistor, 12v relay and 1n4007 diode
I bought that one it didn't work for me but i ended up using a slightly different version. Thanks for making this video you got me on the right track and saved me a bunch of time!
it took me 3 weeks, after a lot of search, and reading youtube comments, some guy talked about " pwm " but he dindt say how he manege to make it works.
@@millechemins8436 it work today bro?
@@millechemins8436 the two red wires in pwm module are pwm 1.6v and the ground(_) of 12v?
@@kimizahrati7527 no because he has alarm led blinking
we dont use the inverter compressor anymore, it become a normal fridge@@karimRemi
there are 3 part of this video, this is part 1 , before commentting it dont work
took me 3 weeks of research, diging in youtube comment to find this solution, by chance i saw a comment about pwm, i had to go search on amazon for one to dc voltage www.amazon.ca/gp/product/B08GP7JXVH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
There is 4 wire going to the fan, the middle wires, give 12v dc alway, and a third wire who gave order to fan to run or not.
Its 0.6vdc when fan is Off , 1.63vdc when fan is On. This call Pwm signal. The 4 wire, we dont need it, it tell the bord when the fan is on. SO the thirs wire is vall PWM signal.
After weeks of research and reading TH-cam comment from lg linear compressor to conventional. A guy said he manage to make it work with a pwm, and solid state relay BUT he didn't show, tell how.
Find a pwm to dc , a solid state wire Dc ( 3v dc to 24v dc ) to Ac.
Very important, my pwm board only put out 4.23v dc a the SSR will convert that to AC.
After all that the compressor start with the fan.
You have alarm led too
I ran mine before i got the parts and it still operated as it should alarm doesn't stop it from operating as intended.
To do that i build a circuit a filter rc low step, only cost around 2dlls to build , i used 380ohms 1/4w resistor, 47uf 16v capacitor, 2n2222a transistor, 12v relay and 1n4007 diode
WHAT ARE YOU TRYING TO SAY? NOW I'M MORE CONFUSED AND LOST 😢
Muy bueno traducir o que sea por lo menos para leerlo 😅
Hello my friend you garet diagram is magnific working
Where will the elementatio. wire be installed? Brother, you must give me reply.
what?
How about the coil's 12vdc of the original compressor relay on the board??
So the pmw module will be never standby?
it will with the consistent 12v