I see this video recommendation? I look for the time/date. I see tens and minutes. I see all the welcome back messages. Gee man, pure Joy to see you. 😀👍🏻👌🏻💡📏⚠️🔆 OK, now back to the video...
I'm used to designing all my own stuff, but sometimes it's nice to give my brain a break and use plans where all the hard design work is already done. Jer's Gen 2 belt grinder show excellent engineering decisions, and the excellent instructions were very clear and well-written. I've since bought his plans for both these attachments here and just finished welding together the small wheel unit. Next on the build list is his tilting table.
Hi Jeremy! I was talking about you the other day, and wondering how you were doing. It has been a long time since we heard from you. At that time you were wondering in what direction your life was going .... so it is great to see you are healthy and still being wondrously creative! Keep it up - your fans will ALL be glad to see you back :)
It is always such a treat to get notified of a Jeremy Schmidt build/video; I have been waiting the last couple weeks. The builds are great but I really enjoy your professional presentation and explanation along the way. Other channels could learn a lot from your style. I know that a quality video doesn't just happen so I would like to thank you for your time and effort. Don't be a stranger; come back soon.
Can anyone explain to me (I hope I didn't miss it being explained by Jeremy in the video) what the deflector does (I assume it deflects, but what is that, and what's the purpose)? Edited to add: I've not yet seen such outpouring of delight over a TH-cam content creator as now, here, for you. A testament to how much liked and appreciated you are, by people from all over the planet! Welcome back, genius!
The deflector wheel allows you to grind into a deep notch, since it bends the belt >180° around the wheel. It’s usually not used, but can be useful for some jobs.
I have no welding equipment but I AM BUYING YOUR PLANS IN BOTH METRIC AND IMPERIAL because we have missed you, Jeremy. Also, $7.00 seems very low for all your work and improvements! I hope everyone of your subscribers buys them as well! Welcome back!
Glad you are back as is most of the internet from looking at the comments. We missed your lucid and entertaining explanations of amazing constructions.
SO GLAD to see you back! I truly love the way you work and the pure creativeness behind the designs is just amazing. Plus it's just good to see you again. This format that we use is a funny thing, we start to think of the people we watch as “friends” we get to know them, in a way, and yes, actually start to care about them because we can relate to them and the people we perceive them to be. While the actual person we watch and relate to may be somewhat different than the person on the screen, when you get to be my age 66, you can trust your instincts and know they are close if not spot on. What I describe here is how so very many of the people who subscribe to your channel feel, even if they are unaware of it. Welcome Back!
I must be slow, I just found this video. Thank God you are back, I missed your videos. I hope that you will be putting out more videos, like you used to. I hope the time gap was not because of anything major and that all is right with you and your family.
Jeremy you are an amazing young man. That is an incredible machine you have designed and built. Wish I had one years ago when I did Fabrication work. Seems like you have a pretty loyal bunch of followers best of life moving forward.
This grinder is doper than the last! I can't bring myself to start over, but I'm glad to see you incorporated square tubing instead of the welded I-beams. I was just starting the large wheel attachment for my gen 1, so I'll be incorporating the DOM axle. I really appreciate the improvements to the small wheel grinder, so I will rebuild that attachment. So many good ideas!
Jeremy, I am in awe of your work as always, and it's great to see you back on TH-cam. I'm hoping to buy my first house this year, and as soon as I have the workshop space for some projects, your belt grinder is going to be first on the list. Sending my love from Australia!
I was just thinking about your content the other day and checked your profile to see you hadnt uploaded for near on a year. Then lo and behold a few days later you posted. Great to see you creating again. Thanks for the content Jeremy.
Clever and ingenious - simplifying a design to make it better can so often be the hardest to achieve. Well done and thank you Jeremy for a fascinating update video.
Holy smokes are you popular Jeremy! Look how many people are commenting about how they missed you :-) glad to see you back buddy. (My offer still stands of course anytime)
Glad to see you back!! I just added your Gen 2 plans to my ever growing stack of projects! I've got a stack of parts for (most of) a Gen 1 -- was making a number of mods, but I like the changes (and your work!) enough that I think I'm going straight to G2!~
Jed Schmidt ...we❤love you dear man! Where in the Pluperfect Hallelujah have you been gone. We lost you to the "nth" degree. For, you are one of the best Geminis; wherever. And you're a "Cut-Up", to the best coming down!😉Thank you Jed. We DO love you Sir❤!
Hi Jeremy, you can weld the inside corners shows at 6:36. what you need to do is put a big block of steel in between the fork at the other end. Either make the block an exact fit or shim it up. Then put some thick strips against the outside with a couple of heavy clamps, or put fork and block in a vice. With all the welds on the other sides distortion will be negligible, but the strength of the part will greatly increase.
Jeremy! So glad to see you back! You’ve been missed. Great video, I always enjoy them. I’ll be watching the full Gen 2 build shortly. I really hope you’re doing good man!
Jeremy in fact I love your works, to say I like your works is understatement, I am enthusiastically in love with such masterpieces of your designs. I was searching through TH-cam today and came across your channel big up bro more grease to your elbow.
Good to see you back Jeremy! The changes that you made to that Belt Grinder are really terrific. I hope that you are doing well & have taken care of the issues that you were having in the past. 😉😉👍👍
I’ve been waiting two years for the return! Ironically, I was re-watching the Gen 1 build about two days ago. So glad to see you back. Hope there’s more.
I love your lego inspired instructions. The gen 1 grinder had to be my favourite grinder build. The gen 2 add so much to the design and now you have a metric version I am really excited! I think I'll be building my first grinder this year 😁👍👍👍👍👍👍
I thought the last one was great but this looks to be even better. 👏🏻👏🏻It’s so good to have one of my favourite content producers back on the Tube. I’m looking forward to the next episode.
Welcome BACK JEREMY !!!! Have missed your brilliance and style on here since you took a break, hope you were able to achieve what you wanted in that time. Now to go back and catch the vids I've missed!!
I always find it funny how often you use the grinder in the manufacture of the grinder. I know there are other ways to do those processes and it's just for convenience, but it's funny to imagine someone trying to build it and getting confused by the chicken and egg situation
Awesome build! You make the entire build look simple. Lot's of awesome metal working techniques that can be applied to all kinds of products, making mills and lathe not essential.
love the new design Jer! Now make the whole belt grinder assembly oscillate up and down and you got yourself (and us mere mortal viewers) a combo oscillating spindle/belt sander to replace half of our wood/metal tools lol....bro you are one heck of an engineer, cheers
14:23 I might be speaking for myself--I sincerely doubt it--but I find welding to be not only incredibly interesting, but listening and watching a weld bead being laid down is some straight up ASMR.
Haven't been happier seeing a video notification in a long time. Welcome back, so excited to see what you are coming up with next! Regards from Germany
Welcome back, you've been missed.
I miss the humor tho. This is a killer comeback, don't get me wrong...but where's that dry canadian humor we all adore so very much, eh?
@@jamesbramlett5407 he’s not Canadian, IIRC😱
@@jeremyspecce I Kno I Kno...but Dat Canadien HUMOR! (I have a Tesla too, and also wear Carhartt)
@@jamesbramlett5407 fair enough! 🇨🇦
Great to see you back, video is great as usual
I see this video recommendation?
I look for the time/date. I see tens and minutes.
I see all the welcome back messages.
Gee man, pure Joy to see you.
😀👍🏻👌🏻💡📏⚠️🔆
OK, now back to the video...
Jeremy I could not click on this video fast enough. I have thoroughly missed your content and I am happy you're back. I hope all is well
I'm used to designing all my own stuff, but sometimes it's nice to give my brain a break and use plans where all the hard design work is already done. Jer's Gen 2 belt grinder show excellent engineering decisions, and the excellent instructions were very clear and well-written. I've since bought his plans for both these attachments here and just finished welding together the small wheel unit. Next on the build list is his tilting table.
so glad to have you back! I missed your vids and creative insights!
Jeremy, congratulations on your return!!!
Greetings from Russia
Wow, Jeremy, you have been very productive in your absence! Bravo! Great builds!
Hi Jeremy! I was talking about you the other day, and wondering how you were doing. It has been a long time since we heard from you. At that time you were wondering in what direction your life was going .... so it is great to see you are healthy and still being wondrously creative!
Keep it up - your fans will ALL be glad to see you back :)
It is always such a treat to get notified of a Jeremy Schmidt build/video; I have been waiting the last couple weeks. The builds are great but I really enjoy your professional presentation and explanation along the way. Other channels could learn a lot from your style. I know that a quality video doesn't just happen so I would like to thank you for your time and effort. Don't be a stranger; come back soon.
Thank you! I felt very out-of-practice making this video, so I’m glad you still liked it :)
@@Jer_Schmidt So nice to have you back. I hope you'r well!
@@Jer_Schmidt здравствуйте, размеры ленты???
Hey, good to see you back!!!
Welcome back! Nice to see you’ve moved straight back in with your usual insightful, interesting and detailed videos. Awesome👍🏻
OMG I was worried about you. Thrilled to see you back.
He's back with more awesome fabrication and hilarious comedic timing! Welcome back! 😆
I was just rewatching your older videos the other night. Man I’m happy to see you back.
Out of the 53 people that I am subscribed to, I saw your new vids show up and had to watch them first. Good to see you.
I do hope that you create a set of plans for a surface grinder attachment. Love your work!
Can anyone explain to me (I hope I didn't miss it being explained by Jeremy in the video) what the deflector does (I assume it deflects, but what is that, and what's the purpose)?
Edited to add: I've not yet seen such outpouring of delight over a TH-cam content creator as now, here, for you.
A testament to how much liked and appreciated you are, by people from all over the planet!
Welcome back, genius!
The deflector wheel allows you to grind into a deep notch, since it bends the belt >180° around the wheel. It’s usually not used, but can be useful for some jobs.
@@Jer_Schmidt Thanks for that, Jeremy.
Welcome back Jeremy! Great fabrication and instruction. We missed you but you haven’t missed a step.
I have no welding equipment but I AM BUYING YOUR PLANS IN BOTH METRIC AND IMPERIAL because we have missed you, Jeremy. Also, $7.00 seems very low for all your work and improvements! I hope everyone of your subscribers buys them as well! Welcome back!
SSSSSSSSSSSSSSSSssssssssst where are the plans hiding?
Glad you are back as is most of the internet from looking at the comments. We missed your lucid and entertaining explanations of amazing constructions.
Welcome back. Glad to see you making videos. 🙂
SO GLAD to see you back! I truly love the way you work and the pure creativeness behind the designs is just amazing. Plus it's just good to see you again.
This format that we use is a funny thing, we start to think of the people we watch as “friends” we get to know them, in a way, and yes, actually start to care about them because we can relate to them and the people we perceive them to be. While the actual person we watch and relate to may be somewhat different than the person on the screen, when you get to be my age 66, you can trust your instincts and know they are close if not spot on. What I describe here is how so very many of the people who subscribe to your channel feel, even if they are unaware of it. Welcome Back!
I must be slow, I just found this video. Thank God you are back, I missed your videos. I hope that you will be putting out more videos, like you used to. I hope the time gap was not because of anything major and that all is right with you and your family.
Seriously the best tool design I've seen on this platform, full stop.
Jeremy, very glad to see you're back! Looking forward to your amazing projects!
Dude!!! So happy to see you post, literally one of my favorite content creators. I really hope you continue to post!
What a treat Jeremy to see you back! Please say that this is the first of many more.
Glad to see you again! I have one word of advice: optical center punch. The tool of the century.
Jeremy you are an amazing young man. That is an incredible machine you have designed and built. Wish I had one years ago when I did Fabrication work. Seems like you have a pretty loyal bunch of followers best of life moving forward.
Great to see you back,and see you fabricating again.
I have legitimately been watching your videos on repeat lately. I AM SO HAPPY YOU ARE BACK. WHERE HAVE YOU BEEN? I MISSED YOUR CONTENT!
ALRIGHT!!!! However long you post, we love ya--these new posts or a million more.
This grinder is doper than the last! I can't bring myself to start over, but I'm glad to see you incorporated square tubing instead of the welded I-beams. I was just starting the large wheel attachment for my gen 1, so I'll be incorporating the DOM axle. I really appreciate the improvements to the small wheel grinder, so I will rebuild that attachment. So many good ideas!
Jeremy, I am in awe of your work as always, and it's great to see you back on TH-cam. I'm hoping to buy my first house this year, and as soon as I have the workshop space for some projects, your belt grinder is going to be first on the list. Sending my love from Australia!
Nice Additions, well thought out and applied. Much appreciated.
Welcome Back, you were missed. Glad to see you post again.
Welcome back. Thank you for your input and the time you put into these videos. Please don't stop
I was just thinking about your content the other day and checked your profile to see you hadnt uploaded for near on a year. Then lo and behold a few days later you posted. Great to see you creating again. Thanks for the content Jeremy.
Clever and ingenious - simplifying a design to make it better can so often be the hardest to achieve. Well done and thank you Jeremy for a fascinating update video.
Excellent. It's a good day when you upload; welcome home Jeremy!
Holy smokes are you popular Jeremy! Look how many people are commenting about how they missed you :-) glad to see you back buddy. (My offer still stands of course anytime)
I'm a young woman from VietNam and I admire what you are doing keep going on ❤️❤️ love from VietNam.
من بغداد شكرا لك جيرمي انت مبدع في عملك وانا اتابع قناتك من سنة ٢٠١٤ اتمنى لك التوفيق وحظا طيبا
I will be looking forward to the surface grinder attachments. Thanks so much for your top quality work.
Glad to see you back!! I just added your Gen 2 plans to my ever growing stack of projects! I've got a stack of parts for (most of) a Gen 1 -- was making a number of mods, but I like the changes (and your work!) enough that I think I'm going straight to G2!~
Sir, glad that you are back. Looking forward on seeing your new projects. Hope you are feeling better.
Good to see you back here entertaining us. Hope your path has leveled out.
Jed Schmidt ...we❤love you dear man! Where in the Pluperfect Hallelujah have you been gone. We lost you to the "nth" degree. For, you are one of the best Geminis; wherever. And you're a "Cut-Up", to the best coming down!😉Thank you Jed. We DO love you Sir❤!
Hi Jeremy, you can weld the inside corners shows at 6:36. what you need to do is put a big block of steel in between the fork at the other end. Either make the block an exact fit or shim it up. Then put some thick strips against the outside with a couple of heavy clamps, or put fork and block in a vice. With all the welds on the other sides distortion will be negligible, but the strength of the part will greatly increase.
What a coincidence I was literally thinking about this grinder yesterday. Glad to see you back
Jeremy, another incredibly well thought out and well built tool. I'm amazed by the build quality given the tools used. Thanks for sharing.
Jeremy! So glad to see you back! You’ve been missed. Great video, I always enjoy them. I’ll be watching the full Gen 2 build shortly. I really hope you’re doing good man!
Welcome back. Great to see you again.
So much easier to make these modifications now you have a belt grinder!!!👍
Jeremy in fact I love your works, to say I like your works is understatement, I am enthusiastically in love with such masterpieces of your designs. I was searching through TH-cam today and came across your channel big up bro more grease to your elbow.
Good to see you back Jeremy! The changes that you made to that Belt Grinder are really terrific. I hope that you are doing well & have taken care of the issues that you were having in the past. 😉😉👍👍
Happy to see you back.
I think I speak for the whole Internetz when I say good to see You back, You had us worried and we hope all is good.
I’ve been waiting two years for the return! Ironically, I was re-watching the Gen 1 build about two days ago. So glad to see you back. Hope there’s more.
Very glad to see you back. I really enjoy your work!
Jer i just watched first the ~50 and now the 18min video. Without any doubt the two best videos in 2021 so fare... thrilled that you are back
Hello jeremy very good to see you back here
Glad to see you back. Even more happy to see more new and innovative solutions.
Hi Jeremy, really nice to see you out and about. You look good, hope you got everything straightened out.
I love your lego inspired instructions. The gen 1 grinder had to be my favourite grinder build. The gen 2 add so much to the design and now you have a metric version I am really excited! I think I'll be building my first grinder this year 😁👍👍👍👍👍👍
Thank you!
Very happy to see you back on TH-cam! 😀🇳🇴
Glad to see you back Jeromy
I thought the last one was great but this looks to be even better. 👏🏻👏🏻It’s so good to have one of my favourite content producers back on the Tube. I’m looking forward to the next episode.
welcome back Jeremy, You have special talents and very good at what you do
Jeremy, I am so glad you are back! I so look forward to see all of your content!
I thought youtube notified me of an old video!
Welcome BACK JEREMY !!!!
Have missed your brilliance and style on here since you took a break, hope you were able to achieve what you wanted in that time.
Now to go back and catch the vids I've missed!!
Awesome to see you back! The updates for everything is great, definitely gonna have to buy plans for gen 2 now as well!
I always find it funny how often you use the grinder in the manufacture of the grinder. I know there are other ways to do those processes and it's just for convenience, but it's funny to imagine someone trying to build it and getting confused by the chicken and egg situation
Nice improvements on both accessories. Good to see you back on TH-cam.
See Jeremy post...Fastest click in the west!
Great to see you back!
So great to watch more stunning work. Really happy to see you here again!
Great to see u back... 👌🤘👊👏
Wow! Jeremy is back! That’s the best news on YT today 🤗
Hi Jer Very good design, build, and video be proud of your work , great job
Awesome build! You make the entire build look simple. Lot's of awesome metal working techniques that can be applied to all kinds of products, making mills and lathe not essential.
Jeremy, you're videos are amazing. Please keep grinding.
Amazing work, Jeremy! And welcome back, we've all been missing you!
I really glad you made some more upgraded tools like your methodology and thought process for making different shop tools!!😊
Brilliant. Excellent work, Jeremy. I would love to build one of your grinders, it's undoubtedly the best I've seen.
Welcome back! I've been periodically re-watching your back episodes during your hiatus, hoping you'd return.
С возвращением Джереми! ))
Nice to see you back, we missed you!
Great update of the beltgrinder aswell.
Duuuuuuuude where you been. So so good to see you back. Love your work.
Great to see you're back Jeremy! Best regards from The Netherlands!
fantastic work, I really enjoy watching how you do things, adding your tips and tricks to my basket of knowledge
Not watched the video yet. I'm really looking forward to it. Welcome back and thanks for posting.
You’re really good with a portaband. Really neat work.
Great to see you again. Hope all is well.
love the new design Jer! Now make the whole belt grinder assembly oscillate up and down and you got yourself (and us mere mortal viewers) a combo oscillating spindle/belt sander to replace half of our wood/metal tools lol....bro you are one heck of an engineer, cheers
Glad to see you back! Hope all is well. Was just in your neck of the woods this last week-end while visiting the Chiricahua's
I'm impressed with your work. Thanks for sharing. Glad to hear from you again.
So happy to see you again
Wow.
Sat through both videos, and time flied!
Awesome build, thank you.
Good to see you back. You could have your own tool line. Build it and they will come.
14:23 I might be speaking for myself--I sincerely doubt it--but I find welding to be not only incredibly interesting, but listening and watching a weld bead being laid down is some straight up ASMR.
Haven't been happier seeing a video notification in a long time.
Welcome back, so excited to see what you are coming up with next!
Regards from Germany