Just when I thought I knew all the answers, you changed the questions !?! You continue to amaze and inspire, with knowledge, patience, and thoroughness, Zen Master !! Thank you...
THANK YOU FOR THIS!!!! I JUST bought a used one about 2 hours ago - rod and reel combo for $20. It seems to work fine, but has a tiny squeak so I decided to take it apart to clean and lube it. I do it every year or so with my other reels, but this is only my second baitcaster, and the first one I'll take apart, because the other is a new Abu Garcia. I can't thank you enough.
I found your channel this year And have had extra time on my hands I started collecting older reels and your videos They are the best information and instructions you could find anywhere online keep up the good work On a side note I had a question I recently picked up a Dam quick finesse It's quite a large real Roughly the same size as my daiwa 7350RL Just wondering how to find out how old it is Also wondering if the mechanic should all be the same as I fish right handed so I would like to switch the inners Thanks
Here is a site that has a lot of information on the models and age of the reels home.kpn.nl/roland.lindenberh/index.html The mechanics are very similar throughout the line - Thanks - Dennis
I'm troubleshooting magforce on an old BW2, it seems to be maxed out no matter the setting. I've serviced it as best as I can, but it looks like the central magnet is spinning freely and I suspect that's the issue. Do you have any videos covering this, or any suggestions?
I do not have any videos, but those mags get dirty over time and that can cause issues. Also, if they have broken loose and are spinning freely, it is probably from age and that is something that cannot be repaired
Good morning Dennis, I just purchased a similar reel (Procaster Magforce PMF1000) that i will be servicing soon. I purchased it as a sentimental reel as it was my 1st baitcaster. IF I remember correctly, the manual said not to open the magnet side of the reel. Do you know if that is correct and how would I or do i need to service that side? Thank You
I don't have the manual, but generally there is nothing going on in the non-gear side, so you only need to oil the back bearing. That can be done through the case and without removing the side plate - Dennis
Like the others, there are several different versions of this saltwater sized Ambassadeur reel. They are all very dependable and will last a long time. If you are considering one, I would recommend the models made in Sweden - Dennis
This ALMOST worked great!! I have my reel all cleaned up, looking nice, and all the parts move smooth and quiet... but... in putting it back together the reel post spins without engaging the gears unless I have the drag adjuster attached and tightened enough to add a little tension - then that eventually works loose. It won't work only partially assembled like yours does. ??? Also I found two tiny brass bushings on the table that I don't see in your video, and can't figure out where they fell out of. Any idea what I might have goofed up, or a step I missed that isn't covered? And any way to send you pics of the bushings to see if you can identify them? Otherwise, I still say it's a great video, and the issues, I'm sure, are on my end. I have a channel where I do the same thing you're doing here, only with firearms, so I understand the hassle of asking you, but I thought I'd try. Thanks!
Yes - I installed it the inverse of the way it was. Whoever serviced the reel previously put the fabric washer on top. It belongs in the main gear with the metal keyed washer on top. That is why I put it back different than it was. Dennis
Followed you Dennis and did my magforce...I can't say how much I appreciate your channel...
Thanks Glenn
Just when I thought I knew all the answers, you changed the questions !?! You continue to amaze and inspire, with knowledge, patience, and thoroughness, Zen Master !! Thank you...
What was the question again :). Thanks for watching - Dennis
THANK YOU FOR THIS!!!! I JUST bought a used one about 2 hours ago - rod and reel combo for $20. It seems to work fine, but has a tiny squeak so I decided to take it apart to clean and lube it. I do it every year or so with my other reels, but this is only my second baitcaster, and the first one I'll take apart, because the other is a new Abu Garcia. I can't thank you enough.
These are nice designs that will last as long as they are cared for on a regular basis. Best wishes for tight lines - Dennis
You are the best
Thank you for the kind words and for watching =- Dennis
Awesome reels. I own/use/collect about a dozen of em.. That reel is over 30 years old.. Can't beat em..
I like this one and I will take it fishing as soon as we can get out of our house! Stay safe and stay well - Dennis
I found your channel this year And have had extra time on my hands I started collecting older reels and your videos They are the best information and instructions you could find anywhere online keep up the good work On a side note I had a question I recently picked up a Dam quick finesse It's quite a large real Roughly the same size as my daiwa 7350RL Just wondering how to find out how old it is Also wondering if the mechanic should all be the same as I fish right handed so I would like to switch the inners Thanks
Here is a site that has a lot of information on the models and age of the reels home.kpn.nl/roland.lindenberh/index.html The mechanics are very similar throughout the line - Thanks - Dennis
I'm troubleshooting magforce on an old BW2, it seems to be maxed out no matter the setting. I've serviced it as best as I can, but it looks like the central magnet is spinning freely and I suspect that's the issue. Do you have any videos covering this, or any suggestions?
I do not have any videos, but those mags get dirty over time and that can cause issues. Also, if they have broken loose and are spinning freely, it is probably from age and that is something that cannot be repaired
I reglued the center magnet and it now casts twice as far and operates as it should have.
I have a BW2 Diawa is it basically the same...
A lot of these reels only make minor changes between models. That may be what is happening here
This video I needed to see I found one at a pawn shop for 3 bucks and older brother took it apart and some pieces came out
Good morning Dennis, I just purchased a similar reel (Procaster Magforce PMF1000) that i will be servicing soon. I purchased it as a sentimental reel as it was my 1st baitcaster. IF I remember correctly, the manual said not to open the magnet side of the reel. Do you know if that is correct and how would I or do i need to service that side? Thank You
I don't have the manual, but generally there is nothing going on in the non-gear side, so you only need to oil the back bearing. That can be done through the case and without removing the side plate - Dennis
Hi again can you tell me if their is one better Abu Garcia 7000 then the other .
Like the others, there are several different versions of this saltwater sized Ambassadeur reel. They are all very dependable and will last a long time. If you are considering one, I would recommend the models made in Sweden - Dennis
@@2ndChanceTackle that's what I was thinking
This ALMOST worked great!! I have my reel all cleaned up, looking nice, and all the parts move smooth and quiet... but... in putting it back together the reel post spins without engaging the gears unless I have the drag adjuster attached and tightened enough to add a little tension - then that eventually works loose. It won't work only partially assembled like yours does. ??? Also I found two tiny brass bushings on the table that I don't see in your video, and can't figure out where they fell out of. Any idea what I might have goofed up, or a step I missed that isn't covered? And any way to send you pics of the bushings to see if you can identify them?
Otherwise, I still say it's a great video, and the issues, I'm sure, are on my end.
I have a channel where I do the same thing you're doing here, only with firearms, so I understand the hassle of asking you, but I thought I'd try.
Thanks!
Yes - send me pictures to my email 2ndchancetackle@gmail.com and I will see what I can do to help - Dennis
@@2ndChanceTackle thanks!!
something wrong..the star drag washers , was up the cotton and down the metal, you asembled at the inverse. Martin
Yes - I installed it the inverse of the way it was. Whoever serviced the reel previously put the fabric washer on top. It belongs in the main gear with the metal keyed washer on top. That is why I put it back different than it was.
Dennis