Solidworks tutorial | Bevel gear and pinion mechanism in Solidworks
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- in this tutorial video i will sketch Bevel gear and pinion mechanism in Solidworks with the help of design Library.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook pages for drawings.
/ cadcamtutorial
/ cadcamtutorial
![[SUB] 베몬이 교관님 멘탈을 탕탕 후루후루~٩(๑❛ᴗ❛๑)۶ FOREVER 웃게 되는 갓기들의 수련회 | 돌들의침묵 | BABYMONSTER(베이비몬스터) 'FOREVER'](http://i.ytimg.com/vi/FISAO7BwIxE/mqdefault.jpg)
![แฉ [2/4] 17 ก.ค. 67 “ลิลลี่ เหงียน” เปิดใจหลัง “เอิร์ก เลเดอเรอร์” ตอกกลับเรื่องโกงเงิน 50 ล้าน](http://i.ytimg.com/vi/s8KapfEO5NI/mqdefault.jpg)
To think I've been manually drawing gears this whole time. That tip saved me hours.
Thats just silly of you
@@maalikserebryakov how mean lol
great like always. I like your tutorials. I see a lot of tutorials in TH-cam from different people but yours are the best. because you talk and do, but others they talk tooooooooo much and do less. they are really boring.
God bless you dude.
thanks again
Not all hero's are on the streets. Some of them are on youtube. God bless this tutorial!
Many thanks from Zimbabwe
Made my first bevel gear, video was very helpful thank you...MAN!
You have magical teaching ability Mahtab vai,thank you so much.
i basically learnt everything i know in this software from you
thank you so much
Best guidence... Thankyou ... I learnt much more here as compared to private class
Thank you from turkey. Good teacher.
Sinan YILDIRIM Thanks you so much :)
just perfect !!! thank you guys.
I have had learned very much with these tutorials....congratulations!
Thanks,
Excellent video for design . Thanks .
Excellent tutorial. Thanks so much
Is there any difference between the option Animation, Basic Motion, and Motion Analysis?
Thank you.
Indeed nice tutorial. Sir I am assembling mitre gears but it's showing generalized constraints. How do I remove it? Please reply. Thanks
Класс очень помогло. Thank yoa from Russia.
Hi mate thanks for tutorial,
Where can I find parts to work on their assembly?
Hello Sir, what can be the minimum module possible for bevel gear assembly?
A gear with the module of 0.12 mm can be manufactured, by any means?
The video was very helpful! I made a bevel gear assembly mounted on a shaft ....but the problem is the motion study is not smooth it is jumping from one second to other. I really need some help here. It will be thoughtful if you reply 😊
Hello sir, first of all I would to say thank you for making this channel. I have learned a lot of things from here. I want a suggestion from you, what configuration laptop should I buy so that my modelling & simulation will become smooth?
Please suggest me for
Processor
Graphics card
RAM
Whether to take SSD/HDD
My budget is 50k
i really like your show
Do you use solidworks visualize
hello sir i've just installed sw and in assambley all parts are off and i can't chose it !! could you help me ???
Sir, I am not being able to find the base revolve in gear . It is only showing solid bodies when I select the drop down menu
Thanks
Sir when I take part from toolbox then it is showing
Are you trying to make derived part? Then what should I do
thanks its working
Thank you! But gearbox mate part is missing
Can you tell me how to make bevel gear and it's penion separately
Congratulations!
I wanted to know if it is possible to change work angle from 90 ° - 60 ° degree
Regards Luca
possible but you have to change the face width of each gear.
thank you so much for the information, and good continuation!
Luca Greetings
Thank you very much 🙏
You are the most welcome,
why i cant edit these part ?
Thanks! !
when I try to make it the same as you did... they are showing that don't have a toolbox installed. I'm a student... I installed a version which the professor gave us.. how can i get tool box option in my solid works??
For an introduction, I'm Francis Tucker , am an African who is making an actual flying single seat helicopter using chiefly local materials. I am very much in need of a set of bevel gear and[ two] pinions. The ratio between the center bevel gear should be one is to two very similar to the bevel gear in this photo. Eg. The pinion gear should have ten teeth and the center bevel should be twenty. I will prefer all of them having splines or key ways for mounting them to their respective shafts. the pinions should have twenty mm hole in the middle whiles the center bevel has thirty inner hole, the diameter of the spline. Please inform me as to how to get these item components to buy. Thanks.
👏👏👏
Hey there, I am having some problem in the toolbox.While changing the number of teeth to 40 it's staying 20 only.What should I do now..?
check either you selected the perfect group or not i means check its Straight Bevel gear,
It's straight bevel gear,but still I am facing same problem.
Can you show the assembly of miter gears?
Great vid
Thanks,
please we need a video about worm gears?
worm gear tutorial available in our channel check below link,
th-cam.com/video/zjSCypsKnTE/w-d-xo.html
sir only gear is moving. dont we need some physical motion btwn gears and pinion?
we used contact command to make physical motion between gear & pinion,
Sir thanx. it would be so nice of u to help me in your channels other videos stirling engine. that video is awesome but some parts are allready ready in your pc. how can i have those parts with dimensions. It wud be so nice of u to help me. Sir i think yur videos are really awesome and i have suggested this channel to all my friends and my circle. It wud be so nice of u to help me if u cud tell how could i make those parts with proper dimensions if i were making exact same engine as yurs (same dimension. Thanx
Email me.
CAD CAM TUTORIAL could i get your gmail id pls?
Great
Thanks,
oka thank you
Why does it say it is always overdefined? help anyone?
How to make manually straight bevel gear and pinion gear please
Top
Thanks,
Good tut. Please next time increase the volume. The adds are 100 times your voice and when they come up its kills my ears. Thanks.
Plz say total bevel pinion?
oka?
oka?