ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Installing Calmer Upgrade Kit on John Deere 40 or 90 Series Corn Head
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- Follow along with Calmer's shop foreman, Andy, as he walks through the installation process of the Calmer Upgrade Kit on a John Deere 40 or 90 series corn head.
Visit www.calmercornheads.com/install to view the full install manual!
#Calmer #JohnDeere #JohnDeereCornHead #CornHead #JohnDeereInstall #Installation #DIY #CalmerCornHeads #BTChopper #CalmerUpgradeKit
00:00 - Intro
00:36 - Tools Needed
02:23 - Removing Hoods, Gathering Chains and Sprockets
09:44 - Removing Grass Knives
11:15 - Removing Stalk Rolls
16:42 - Removing Stuck Stalk Rolls
18:11 - Checking Pinion Shafts and Seals
19:27 - Check Pinion Shaft Timing
18:52 - Installing BT Chopper Stalk Rolls
29:26 - Installing Calmer Grass Knives
32:30: Installing Anti-Hairball Insert
34:17 - Installing Calmer Stripper Plates
35:15 - Setting Stripper Plate Gap
42:07 - Installing Idler Sprockets
46:42 - Installing Drive Sprockets
47:33 - Installing Idler Blocks
48:30 - Installing Gathering Chains
Its really nice when you do a thorough inspection and decide to replace slip clutches at the same time. With the row unit gearboxes hex shaft pulled, you can turn the gearboxes very easily by hand. :D
I wish I would have had one of those pullers when I did mine! Probly $1800 puller
Can you describe the size and brand name of the hydraulic puller? Minimum size required of the hydraulic puller and the cost?
We had this one custom built for us quite a few years ago! There are pullers that are available through John Deere that range in price.
I used a manual puller, Posi-lock model 210. I had to make a custom extension rod to get enough reach (an old beefy hitch pin the correct diameter and cut to length would be excellent). Grind it to a rough point to center it on the stalk roll shaft, and make a small dimple on the other end to keep alignment with the puller. Or get a purpose built stalk roll puller.
Bangladesh is clint
Namba