You would not believe how helpful this video is, I gave up trying to use wifi etc, I got in a hell of a mess trying to set this up, although I have tried yet, but so,so helpful, many thanks
Hi, just a quick question pls... I have enable the sound on my Brewzilla Gen 4 65L but have no sound each time when hit target... Do you know what should i do? Thank you
Hi Jason, you could either start it from the phone app if you have it connected to wifi or you would make a profile with a programmed mash step at room temperature. So for example step 1 would be 68f for 7 hours or whatever you needed the delay to be and then step 2 would be your target mash step of lets say 150f. I hope that makes sense.
I wish that functionality existed. My $20 coffee maker has a timer FFS. Instead, you'll need to add a "holding" step to your RAPT profile to sit at room temp counting backward from when you want to start heating to strike temp. Kinda goofy, but it works.
@@jonrush6308 I'm not sure why it doesn't have a delayed start function built in. At least there is a work around. Fingers crossed they add it to the Gen5 :P
Good tutorial, thanks! In my case there was step, when registering device in cloud turn to mistake: your device is not connected. The rescue was found in updating zilla firmware!
Hello. I bought brewzilla gen4 35l. Yesterday I heated water and turned the system on to calibrate the system. However, as soon as I reduce the heating and pump below one hundred percent power, the system turns the resistance and the pump on and off instead of reducing the power. It is clear that this is not a healthy way of working for the system. How can I make a setting?
Great tutorial thanks. Im trying to register my BrewZilla, I have my mac address but forgot to write down my verification code, is there any way to get it?🤦
I am a bit confused as to why you would want bluetooth ON and why you expected your phone to be connected via bluetooth? At least in the video, all remote controlling is done via wifi and not BT. Though I am interested to hear if you know of anyone cool use-cases for BT other than pairing accessories such as BT temperature probes etc?
You would not believe how helpful this video is, I gave up trying to use wifi etc, I got in a hell of a mess trying to set this up, although I have tried yet, but so,so helpful, many thanks
Thanks for watching. Cheers!
I’m in the market for a new brew kettle and this gen4 is checking all the right boxes. Thank you for your helpful videos on this product.
No problem, we're really happy with our Gen4. Cheers
Hi, just a quick question pls...
I have enable the sound on my Brewzilla Gen 4 65L but have no sound each time when hit target...
Do you know what should i do?
Thank you
Mine only shows a graph how do I get the large temp numbers to show on the screen?
I'll have to check when I'm at the shop but it's an option in the settings of the control panel.
How do you turn off the temp probe and use a potentiometer only?
Is there a delay start? Useful if you want your mash water heated up in the morning. I cannot seem to find the process to do this anywhere
Hi Jason, you could either start it from the phone app if you have it connected to wifi or you would make a profile with a programmed mash step at room temperature. So for example step 1 would be 68f for 7 hours or whatever you needed the delay to be and then step 2 would be your target mash step of lets say 150f. I hope that makes sense.
I wish that functionality existed. My $20 coffee maker has a timer FFS. Instead, you'll need to add a "holding" step to your RAPT profile to sit at room temp counting backward from when you want to start heating to strike temp. Kinda goofy, but it works.
@@jonrush6308 I'm not sure why it doesn't have a delayed start function built in. At least there is a work around. Fingers crossed they add it to the Gen5 :P
Can I get by with a. 20 amp gfci breaker On my 220v circuit ?
Good tutorial, thanks! In my case there was step, when registering device in cloud turn to mistake: your device is not connected. The rescue was found in updating zilla firmware!
Good to know that a firmware update could solve this issue. Cheers
I want like to know if you can connect to a Android device just using Bluetooth?
I don't think you can just yet, has to be connected with wifi.
Do you recommend activating the PID setting?
He shut his off
Hello. I bought brewzilla gen4 35l. Yesterday I heated water and turned the system on to calibrate the system. However, as soon as I reduce the heating and pump below one hundred percent power, the system turns the resistance and the pump on and off instead of reducing the power. It is clear that this is not a healthy way of working for the system. How can I make a setting?
Hello, unfortunately that is how the system is designed. Setting the pump % just turns it off and on, it doesn't reduce the flow. Cheers
Great tutorial thanks.
Im trying to register my BrewZilla, I have my mac address but forgot to write down my verification code, is there any way to get it?🤦
I believe you can restart the registration process to get a new verification code. Worst case do a factory reset. Cheers
Can you brew without using wifi at all
Hi, you do not need wifi to brew with it.
I am a bit confused as to why you would want bluetooth ON and why you expected your phone to be connected via bluetooth? At least in the video, all remote controlling is done via wifi and not BT. Though I am interested to hear if you know of anyone cool use-cases for BT other than pairing accessories such as BT temperature probes etc?
I'm not sure if you can control the unit over bluetooth. It might be only for pairing other peripherals like their thermometers.
Why are all the videos not showing how to connect to WiFi? Ahhh the password is on the monitor lol😂
mairci