I had a friend in Idaho that made kitchen utensils from logging cable (knives, forks, spoons, and yes, sporks). It is a great look and conversation piece.
Suggestion: make a small iron stamp with your logo so that you can warm it and stamp it on wood handles. It is a small thing but adds a lot of value/image to the final product 👍🏼😉
Timmothy that's awesome. Hopefully you get great use out of it for many years to come my friend. Can't wait to see more videos soon. Forge on keep making. God bless.
Thats awesome, nice job making it carry on looking like cable. I guess with the v block you can squish it carefully enough to stop it becoming a straight rod ....
Tim, If I wasn't international, I'd buy a centre punch like that, only maybe a little longer(if that is possible without splaying) so you can get a good grip on it with your hand and not just your fingers.
Could you have heated it up and then smacked the end a handful of times? Just thinking that might weld it more (the tip would have to be in some pre-formed cone, yah this is becoming a process lol), but yah to weld the cable a bit more
Very cool looking! A bit low volume on this video though. Did have to max the volume on my computer to even hear what you were sayin. Probably will shit my pants when I open the next video and have forgot the volume is at max. :P
Nice little center punch there. Next time clean the cable or any steel before tig welding it, it would weld much easier because argon likes clean surfaces not contaminated.
that was a fun project i bet, it looked cool, you could sharpen it and anneal it so that you can try and get it where it needs to be in hardness. I saw that the last hit didn't punch :(
It's beautiful. I love it. I think I agree with Martin: Longer would be more practical. You might be worrying about imaginary problems with the longer ones not welding and spreading in use. You won't know for certain until you do it, I suppose?
I know this has been done before but maybe a cable Damascus knife. People have done it before as one offs but if you get it down I bet you could sell a lot with all that cable you have
Hey Tim, would you ever be doing a series/run of hammers like you do with the axes? i.e. rounding hammer, cross peen, ball peen etc... I'd be super interested in some if you ever consider making some! Cheers.
I had a friend in Idaho that made kitchen utensils from logging cable (knives, forks, spoons, and yes, sporks). It is a great look and conversation piece.
i dunno why im watching this but this is really cool!
Cool I suggest welding the one end before you cut it though. Makes it a little easier if you do it again.
Yeah unless your cable is in a field I use to use hose clamps to keep the cable together before cutting
I thought the exact same thing
I actuall thought the same thing
Suggestion: make a small iron stamp with your logo so that you can warm it and stamp it on wood handles.
It is a small thing but adds a lot of value/image to the final product 👍🏼😉
Looks cool! And nice to see that titanium hammer has been holding up. Nice work you do.
Very cool idea, turned out great!
Very cool, it will be interesting to see how it holds up over time.
That is one of the classiest centre punches I’ve ever seen
Came out lookin like the coolest 50 Cal bullet ever lol😆 gotta make one for myself now🤩
Have never seen a punch looking like that. Super cool look!👍😄
Timmothy that's awesome. Hopefully you get great use out of it for many years to come my friend. Can't wait to see more videos soon. Forge on keep making. God bless.
What an interesting project 🌟👌🏻 The work is perfect and the video is verr warm. Thank you for sharing Timothy 🗜️⚒️✌🏻
Nice punch. Love the look. Hope it holds up to use in the long-term. Always appreciate your videos
I would love one of these for tapping down high spots on cars when doing body work
Idea, make a crate of them, send it to Action Lab, tell them to make them high magnetic for railgun ammo.
I would want to buy a cable punch. Just one of those cool looking tools to have, and use.
Beautiful punch, Tim! I see a new product line…
Nice little punch. We shared this video on our homemade tools forum this week 😎
Dude very nice ,love the axes but good for some variety . Love all your random projects
That's very cool! If you etch it in acid it will reveal a snake like pattern on the tip.
it is awesome. I'd buy one just like it along with one that is dimpled to use as a nail set in my woodworking projects
Looks absolutley awesome!
I mean without trying it my first thought was it seemed way too short, but hey if you are using it and you love it then it is perfect :)
Thats awesome, nice job making it carry on looking like cable. I guess with the v block you can squish it carefully enough to stop it becoming a straight rod ....
Looks like a bullet from “Wanted”
Very cool
Looks like one of those custom bullets from the movie Wanted
1к62 "Красный пролетарий" forever!
I would love to have one of those but longer and narrower. That looks awesome!
Tim, If I wasn't international, I'd buy a centre punch like that, only maybe a little longer(if that is possible without splaying) so you can get a good grip on it with your hand and not just your fingers.
This is really cool, I like those oddball left field ideas 😃
Could you have heated it up and then smacked the end a handful of times? Just thinking that might weld it more (the tip would have to be in some pre-formed cone, yah this is becoming a process lol), but yah to weld the cable a bit more
Very cool looking! A bit low volume on this video though. Did have to max the volume on my computer to even hear what you were sayin. Probably will shit my pants when I open the next video and have forgot the volume is at max. :P
It looks very cool.
that's a rad center punch my man!!
It looks awesome
Nice little center punch there. Next time clean the cable or any steel before tig welding it, it would weld much easier because argon likes clean surfaces not contaminated.
I would etch that. Maybe a damascus pattern formed from the cable twist
Martin looks smarter than all of us.
Very fancy center punch
that was a fun project i bet, it looked cool, you could sharpen it and anneal it so that you can try and get it where it needs to be in hardness. I saw that the last hit didn't punch :(
I'd buy one of those center punches.
It's beautiful. I love it. I think I agree with Martin: Longer would be more practical. You might be worrying about imaginary problems with the longer ones not welding and spreading in use. You won't know for certain until you do it, I suppose?
Be nice to see a axe made out of all the off cuts of your axe's you make forge welded together with some different metal like wrought iron then etched
You should make a series where you make all sorts of things with cable.
Looks like a rifle bullet from the movie "Wanted"
Why not tack the pieces together before you cut the cable?
i had the same thought
Видео было бы короче на пару минут))
I do woodworking but still use a center punch daily and I would totally buy one please make some for sale!!!!!!
What's the name of the white stuff you put on the metal and what's the point? 2:19
I’d definitely buy one
So what would it take to have a firefighter axes made out of some of the train rail steel
It really seems like it'd be easier to do longer and then cut it off to the length you want.
Taofledermaus just got chills
It looks cool. but I just wonder if it's going to act as a spring when you use it.
I also wondered the same.
Who cuts the cable then welds the pieces back together? Weld it first man then cut.
Timothy you could do with lifting the forge hood up a foot save bending all the time,stay safe
Absolutely loving the look of my new axe number 3 it's my I'm calling it hahaha. Only coz I sore it in the vid. Love your work keep it up 😁
I think you should make more of the center punches . Offer them on your web site I bet they would sell
How about changing the middle cord out with some solid bar and Them rapping the exterior with the cablecords
I know this has been done before but maybe a cable Damascus knife. People have done it before as one offs but if you get it down I bet you could sell a lot with all that cable you have
Great job 👍
I think that would make a nice handle for a tool
would buy one for sure!
I didn't even know you could do this
That is so cool!
The axe making is good stuff but the random projects are my favourite views
I'd love to see a 2 headed Hudson bay style axe.
You should call it the stogie! Lol It reminds me of a cigar!
Didn’t test it!!
Love ya work
YAY. Tease
He did test it
@@notabandicoot5227 at the very end of the video, that is what happens when you don't watch all the way through.
We need a Cable ax that still shows the strands like this.
I dont think it would work unfortunately. Maybe not tho.
Sir what is your welding machine brand or what you call this type of welding machine?
I first thought it was a bullet head
Very cool!
If you replaced your cable core with a solid steel core you might be able to make a longer one.
A centre Punch needs to transmit shock to a point. This has shock-absorbing properties?
Now I need to make one out of Copper or Brass in a 7.8mm X approximately 30mm and then load it in an empty case........
Will u make these and sell them?
Hey Tim, would you ever be doing a series/run of hammers like you do with the axes? i.e. rounding hammer, cross peen, ball peen etc... I'd be super interested in some if you ever consider making some! Cheers.
In about 3 weeks. You are going to get wrecked!
@@TimothyDyck WHATTTTT!!! No way!!!! I’ll be waiting buddy! Stocked!
If you made these a bit longer I'd buy one..
If it's longer, it's much more likely to splay out and act like a spring; and maybe even come unraveled
I didn't know that the iron threads became one piece
That punch has almost the exact same lines as a .50 bmg round.
just saying that could be the new 12 gauge slug
I know you must be busy. It is late sitting and I'm sure you're getting crazy orders plus life always has a way. But your loyal fans miss you!
Wouldnt that open up?
Hey Tim where abouts do you live?
this remembers me of forged in fire
I would buy one
You should make those to sell I'm sure they'd sell fast
Керн классный)) топоры суперские!
That looks like a 50bmg bullet
Thumbnail I thought it was a bullet lol
How about a pen made out of cable?
That’s a super cool idea. I’d love to try it!
@@TimothyDyck Amazing, I'd love to see that also if I could afford it id love to buy it.
$400+ for an ax? You've lost your mind!
A wrap of tape where you cut would save you from having to put everything back together
Перед тем как отрезать, надо было край троса заплавить.
Me:(sees thumb nail) sweet forging a bullet! "Click"
Me: (reads caption...) shit...
Cool a just like my son when he have a new toy !!!!!love it just kidding about the toy
Id buy it
looks like something somebody would send to TAOFLEDERMAUS lol
Tim, are you gonna turn this into a product? You should try to make this a product.
Cable bottle opener
you should put your borax in a container so you don't waste it and sprinkle over the container