You are supposed to drain some of the antifreeze first and the fuel pressure on this vehicle is very high, fuel pressure should be releaved1st by removing fuel pump fuse then starting it until it dies. Still pretty good video.
Can you remove the manifold without disconnecting fuel line (or is the line completely rigid all the way)? Also, if you remove the throttle body, can you get away with not disconnecting the TB cooler lines/hoses? Thank you.
Well you helped that’s for sure , I don’t know what your future DIY videos look like just for the love of god I hope you show them how to put it back together atleast 😂.
Thank you! This helped me complete my replacement.
Good job but next time cover with tape the intake holes, you lucky didn't drop a 10mm nut there ✌️
How would that happen the valve is closed stop trying to act like you know mechanic 😂
@@powerofGod788 I wouldn't be calling other people out if I were you. Because you clearly don't know anything about how engines work.
You are supposed to drain some of the antifreeze first and the fuel pressure on this vehicle is very high, fuel pressure should be releaved1st by removing fuel pump fuse then starting it until it dies. Still pretty good video.
Buenas tardes cómo hago para cambiar las boquillas del limpia parabrisas de la infiniti qx56 2005
Hey thanks for the video I’m in need to replace my starter, what tool are you using?
The main tool was a 3/8 rachet and several different size sockets. No specialized tools required for this job.
You literally showed a special tool for the fuel line
Can you remove the manifold without disconnecting fuel line (or is the line completely rigid all the way)? Also, if you remove the throttle body, can you get away with not disconnecting the TB cooler lines/hoses? Thank you.
You would have to unless you want to re install 8 fuel injectors
How much for the job at the shop ?
Well you helped that’s for sure , I don’t know what your future DIY videos look like just for the love of god I hope you show them how to put it back together atleast 😂.
Not a fun job, just did mine. Those 14mm bolts holding the starter are tough.
@@sms9106 yeah mines had a different alternator made so that was tough figuring out how to install the new one .
❤❤
Música en español like👍
Infiniti had to just put that thing under the intake didn’t they
Yo you don't need to remove the throttle body completely. Just bring it forward a bit