Polaris RZR 900 Engine Rebuild | Part 1: Engine Removal

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 พ.ย. 2024

ความคิดเห็น • 23

  • @ryanstanberry7470
    @ryanstanberry7470 3 ปีที่แล้ว +2

    So my dad in the military works with the rescue squadron for the airforce. They have 4 seat 2013 MRZRs (rzrs for military) and he is bringin me a motor from one that they crashed and im gonna tinker with it. This video is gonna help me out. Thx

  • @nsarboc
    @nsarboc 4 ปีที่แล้ว +3

    How many miles were on it?

  • @breakitfixit5102
    @breakitfixit5102 ปีที่แล้ว

    The rear springs, I see the primary are fully collapsed, is that normal?
    I ask as I bought mine use that way and don’t know if they are worn completely.

  • @viper7016
    @viper7016 3 ปีที่แล้ว +2

    You guys are just AWESOME!!! Thank you!

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว

      Our pleasure!

  • @kylekocurek9007
    @kylekocurek9007 3 ปีที่แล้ว +1

    Would the 900 xp ranger be the same steps as this project?

  • @jeffnelson573
    @jeffnelson573 3 ปีที่แล้ว +1

    Hi Jeff here, what can I do as I have just replaced the value cover gasket on my 2016 polaris ranger Xp 900 and it still leaks oil a little bit yet as you can still smell it when you stop riding.I cleaned up the cover and the head before I put the rubber gasket on, so what can I do to fix this problem??? I also replaced the cover bolts and the little rubber washers so I am stumped as to what to do next, Thanks for your time,

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว +1

      Hi Jeff, I would try to find the exact spot it's leaking from. That's usually the wettest area, but if you aren't sure, clean it off and spray some foot spray powder on there, then run the machine. That should clearly show where the leak is coming from. Is the cover cracked or is the sealing surface damaged anywhere? Sometimes the corners of the half moons don't make a good seal, so you can use a dab of silicone sealant in the corners. -Charles

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว +1

      ...also check the oil cap.

  • @RichardWells-ft6sf
    @RichardWells-ft6sf ปีที่แล้ว

    Great information, and quality work being done.
    Wondering about availability of aftermarket parts to rebuild the 99 sportsman 335??
    The most I see on Amazon is the oil pump....

    • @KoltonStroup-n3z
      @KoltonStroup-n3z 10 หลายเดือนก่อน

      First mistake is looking for engine parts on Amazon

  • @seant6624
    @seant6624 3 ปีที่แล้ว +1

    When are you guys doing the 1000 engine removal and rebuild?

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว

      Soon! Should be within the next week or 2.

  • @jacobecavalier1499
    @jacobecavalier1499 2 ปีที่แล้ว

    Hi I have a high idle as long as I have my tps bolted to the throttle body as soon as I pull it away so the vacuum won’t reach it I can adjust idle manually with the screw can u tell me what’s wrong

  • @chrismathews4478
    @chrismathews4478 3 ปีที่แล้ว +1

    Do I have to remove the transmission from the engine if I intend to pull them both out to place in another SXS?

    • @berniemac8413
      @berniemac8413 ปีที่แล้ว

      Did you ever find out the answer?

  • @PitPwny
    @PitPwny 7 หลายเดือนก่อน

    All because I stripped the oil pan…thanks for the instructions.

  • @jaimesbrewer3015
    @jaimesbrewer3015 3 ปีที่แล้ว +1

    Great video

  • @wadesale2958
    @wadesale2958 4 ปีที่แล้ว +1

    how much time to remove engine from start to finnish

  • @franknorman7268
    @franknorman7268 4 หลายเดือนก่อน +1

    Thank you

  • @cameronsaint116
    @cameronsaint116 3 ปีที่แล้ว +2

    I have to rebuild mine at 40 hours “dirt in the engine” says the mechanic. The dam thing was almost neeeeewwwwwww

    • @rmatvmc
      @rmatvmc  3 ปีที่แล้ว +1

      What a bummer! It's really not that bad to do, it's just time consuming. My only advice would be to turn on some music and enjoy the process. -Charles