very good project. The only criticism I would have is that you could have ditched the annoying techno music overlay. But the technical aspect is very helpful
I have a problem with your SKETCH (GSM SIM900) for arduino UNO, the modem can´t connect to GPRS, with other project can connect to GPRS for example with THINGSPEAK. why can´t connect? i´m tried with other baud rate, apn. Repeat in other project used at the same apn and works correctly
Hi, I am trying to connect Blynk using SIM800L GSM module and Arduino Uno. When I connect it to my Arduino uno the module is connecting to the network but failing to connect GPRS. Connect GPRS failed.
In Blynk app project goes offline after few minutes, that mean gsm module disconnected from internet and after reset arduino then will again online for few minutes.... Pl reply.....
I want to monitor soil moisture sensor values and temperature and humidity values using GSM with Blynk and Arduino... Is it possible can you please help me out.
awesome,question: how can i make a led on blynk app to turn on once and dont close it until a sensor detect an object to turn it off and thanks in advance
Assign a Virtual pin to the Blynk led (e.g. V3), then on Arduino side execute this command: "Blynk.virtualWrite(V3,255);" to switch on the blynk led. Note: 255 is high state for led and put 0 to switch it off. Good luck!
Sim900a support only 2g sim services.. And except jio all other sim provides 2g services along with 3g and 4g. So.you can use any sim which has 2g services
@@technolabcreation I tried to do the same thing with that but it didn't respond . The gsm is connecting to the network but not responding . I tried several codes but no . Please help me . Can give me your Gmail ? So I can give you brief details about it
Hi, I know I might be asking a silly question but is there any way like using Arduino Wifi with software to control the phone to call without using GSM module. Currently I am working on a project which using GSM to call but in the end, the product was too big and now still searching for a solution. Thanks!
Yes there is Cheah! Check this link out allaboutee.com/2015/03/23/esp8266-and-arduino-phone-calls-with-twilio-api/ You ll need to modify it according to your needs! Hope this helps
If I use 4g sim then will it catch 2g services? I am really into an arduino project, can u please Whatsapp me +919574266136 I need your help, if u have paid classes i will surely do pay you
You are quick and clear. Awesome job.
Untraditional topics u r selecting in each video...great keep going👍👍👍
Thank you sir 😃😃😃
Badhiya hai yar...
Thank you bhai
Nice video... 😀
Keep making such unique videos..
Thank you alok bhai 😇😇
Good one.... 👌👌👌👌👌👍👍
Thank you
Excellent project
very good project. The only criticism I would have is that you could have ditched the annoying techno music overlay. But the technical aspect is very helpful
Thank you for your feedback..from now I definitely consider to choose good music.
👌👌👌👌nice sir
Thank you
Great project 👌
Thanks man
Very good! Thanks!
Thank you 😁
What is the range ? Can we control within any part of world ?
Yes you can control anywhere from world
What if Device disconnects from GPRS? How are you handling it ? Did you implement Watchdog timer?
Can we add relay in place of led to turn on light or fan.
Yes you can add
I have a problem with your SKETCH (GSM SIM900) for arduino UNO, the modem can´t connect to GPRS, with other project can connect to GPRS for example with THINGSPEAK. why can´t connect? i´m tried with other baud rate, apn. Repeat in other project used at the same apn and works correctly
i am facing the problem with apn its not connecting Dunno why
Hi, I am trying to connect Blynk using SIM800L GSM module and Arduino Uno. When I connect it to my Arduino uno the module is connecting to the network but failing to connect GPRS. Connect GPRS failed.
In Blynk app project goes offline after few minutes, that mean gsm module disconnected from internet and after reset arduino then will again online for few minutes....
Pl reply.....
Yes your gsm module will disconnect from internet... internet connectivity is poor ..
Try to use sim in which you have better connectivity of network
Sometimes if you have low amp then this issue happens! Try to use 2amp power supply
Nice
Thank you
I want to monitor soil moisture sensor values and temperature and humidity values using GSM with Blynk and Arduino... Is it possible can you please help me out.
Yes it is possible.. but response time is not very good
@@technolabcreation it's ok. But I don't know how to do this. Can you please help me with code and schematic? Please
I can do for you..but it will take time
@@technolabcreation I will wate for it sir thank you. Waiting for your response.
Goes this GSM this module supports only 2G sim?
Can use sim900a
12V 1.5 A power supply
Please reply me
badiyaaaa
Thank you
awesome,question: how can i make a led on blynk app to turn on once and dont close it until a sensor detect an object to turn it off and thanks in advance
Assign a Virtual pin to the Blynk led (e.g. V3), then on Arduino side execute this command:
"Blynk.virtualWrite(V3,255);" to switch on the blynk led.
Note: 255 is high state for led and put 0 to switch it off.
Good luck!
3g ya 4g sim is module me use kar sakte hain kya.? Ya uske liye koi aur GSM module available hai.?
Sirf 2g sim use kr sakte hai isme .
4g k liye alag module aata hai
can we send GPS detail to Blynk App using SIM900A and Aurdinuo UNO??
Yes you can
@@technolabcreation how?
without involving the Wifi just using SIM900A
@@mehriasolutions3071 yes without involving wifi..
@@technolabcreation how can you suggest me any video tutorial or can give me code??
Hi
Sir if we need to some more leds how we have to add actually we have define only heart pin 8 so.. Please help me
It's really nice. i tried it but it stops. the message is SIM is missing. I use the SIMCom modul 808. Do you have an idea ?
Check your internet plan
alright, please help me what i need to do
Okk sure
what can i do ?
U must have data plan in your sim
Hi! i did on the step by step tutorial on my sim900A MINI V3.8.2 and say it cannot init, What should i do?
Yes same here...please help?..
I also use Gsm Sim 900A 3.8.2..
I also did step by step..but cannot init?...what should i do?
Please help?
Serial monitor shows "SIM is missing". How to solve this issue?
check your sim is in working condition or not
@@technolabcreation Thanks but now my serial monitor shows "Modem cannot init". Any idea?
can we use 4g/LTE in this sim900 module sir???
No.... this module only support 2g sim
@@technolabcreation but I think sir you was used 4g sim in that module
Sim900a support only 2g sim services..
And except jio all other sim provides 2g services along with 3g and 4g.
So.you can use any sim which has 2g services
@@technolabcreation thanks a lot sir
12 V 2 amp power supply is required for gsm module?
Yes and it is must
My GSM 900A v1.2 is not working . Please help me
What happened???
Please explain
@@technolabcreation I tried to do the same thing with that but it didn't respond . The gsm is connecting to the network but not responding . I tried several codes but no .
Please help me .
Can give me your Gmail ? So I can give you brief details about it
ashishmaurya11220@gmail.com
Hi, I know I might be asking a silly question but is there any way like using Arduino Wifi with software to control the phone to call without using GSM module. Currently I am working on a project which using GSM to call but in the end, the product was too big and now still searching for a solution. Thanks!
No not any other way..
Yes there is Cheah!
Check this link out
allaboutee.com/2015/03/23/esp8266-and-arduino-phone-calls-with-twilio-api/
You ll need to modify it according to your needs!
Hope this helps
Love it
Thank you
Did u use airtel 4g simcard?
Yes.. having 2g services
If I use 4g sim then will it catch 2g services? I am really into an arduino project, can u please Whatsapp me +919574266136 I need your help, if u have paid classes i will surely do pay you
All sim services excluding jio provide 2g services ..so u can use it easily
Can use sim 808?
Yes you can
Thanks
Welcome
Hello Can you tell how to use gsm module with raspberry pi with BLYNK app?
can we interface two gsm modules to act like a chat bots
Yup, in blynk you can bridge Two modules together! But you need to make that setting in the blynk app side.
CAN i USE SIM800L?
👍👍👌👌👌
Thank you
I use arduino mega, how to conect blynk ?
My chip needs to has a internet plan?
Yes definitely
sir please tell what is video editing software you have used ?? please reply us and moreover nice videos
Reply please
I am using wonder share filmora
Software name??
It's a filmora
@@technolabcreation in that we don't have underlining feature i.e at this time 0:32 sir you used this feature
Sir how we can send data over firebase using GSM module plz sir make video plz .... Sir
Okk
Did u enter apn?
in his case it is internet
conect gprs failed... please help sir
Check internet connectivity in your sim
Mine saying cannot init
Register in network failed
app blynk show project off line
I use arduino mega, how to conect blynk ?
Same as in Arduino uno
@@technolabcreation "connecting to blynk-cloud.com: 80" can you help me this problem?