Thanks for the video. I searched for a year to get an answer to using momentary switches no my GT 7.5 kw inverter . Do you have any idea on what size braking resister I should get for my 19 in 3 hp bandsaw and this inverter. Thanks
Your use of the term normally open and closed is backwards. The stop button is normally closed, the fwrd button is normally open and the rev is normally open. Closing (pressing) the fwd or rev button will activate the power to the motor for either forward rotation or reverse rotation accordingly. Opening (pressing) the stop button will deactivate the motor power.
Hello, is it possible to use the +24V terminal (positive) and the COM terminal (negative) to power the VFD relay itself? I would like to connect a 24Vdc led to the relay output but using the internal 24v source.
THE STOP IS CLOSED ACCORDING TO THE METER AND THE FORWARD AND REVERSE ARE OPEN. ALSO YOU HOOKED THE REVERSE TO S1 AND CHANGED THE PARAMETER TO 1 WHICH IS FORWARD.
Yep. He calls all closed switches open and all open closed. Thankfully he showed it with a meter so you can see what it correct. Also he set the reverse to fwd and fwd to reverse.
Please correct this video. It is very misleading to call an NO closed and an NC open. This is just amazing after spending hours trying to figure it out from the chines manual which was translated by google translator. Grow up to the task already. Other than that it is a great product , great vfd for that price, too bad that. The video is absolutely informative but please correct the text. Thank you.
Thanks for great information! If i just want Forward and stop button, should I set parameters as you wrote here...?
Thanks for the video. I searched for a year to get an answer to using momentary switches no my GT 7.5 kw inverter . Do you have any idea on what size braking resister I should get for my 19 in 3 hp bandsaw and this inverter. Thanks
th-cam.com/video/yt2YEVnULDE/w-d-xo.html 1000W /100R
Your use of the term normally open and closed is backwards. The stop button is normally closed, the fwrd button is normally open and the rev is normally open. Closing (pressing) the fwd or rev button will activate the power to the motor for either forward rotation or reverse rotation accordingly. Opening (pressing) the stop button will deactivate the motor power.
This is video which is a three-wire control. Usually two - wire control is used.
Keith's shop are you correct on the for and rev being NO and stop being NC?
@@chivasdeguadalajara Yes the way mine is wired is as stated.
You saved my day ! Thank you.
Hello, is it possible to use the +24V terminal (positive) and the COM terminal (negative) to power the VFD relay itself? I would like to connect a 24Vdc led to the relay output but using the internal 24v source.
you can use 24v
@@huanyanginverter6516 +24v TERMINAL to RO1A, RO1C TO X1 LED, X2 LED TO COM TERMINAL... Correct?
THE STOP IS CLOSED ACCORDING TO THE METER AND THE FORWARD AND REVERSE ARE OPEN. ALSO YOU HOOKED THE REVERSE TO S1 AND CHANGED THE PARAMETER TO 1 WHICH IS FORWARD.
GOOD
Yep. He calls all closed switches open and all open closed. Thankfully he showed it with a meter so you can see what it correct. Also he set the reverse to fwd and fwd to reverse.
Why p5.10=3?
What do you want to express?
@@huanyanginverter6516 just asking why set S10 terminal p5.10=3 if terminal 10 is not used?
@@craftzars I completely don't understand what you're saying. Did you make a mistake with the product.
Please correct this video. It is very misleading to call an NO closed and an NC open. This is just amazing after spending hours trying to figure it out from the chines manual which was translated by google translator. Grow up to the task already. Other than that it is a great product , great vfd for that price, too bad that. The video is absolutely informative but please correct the text. Thank you.
Thank you very much for pointing out the mistake.