ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- I think I’ll be settling with this grinder until further notice. This is the best quality grinder for my brewing needs, at a reasonable price. I think the Comandante will be more consistent, but I am not that much of a purist to be needing the uniformity in particle distribution. I consider it a collector’s item to be bought in the future instead.
*Instead of WD40, try animal fat as lubricant!*
Buy your 1zpresso grinder from the official PH Distributor!
/ thetipplingaskal
Content Timestamps:
00:06 - Unboxing
01:28 - Disassembly
03:56 - Assembly
05:41 - Calibration
06:45 - Grind Setting Adjustment
07:23 - Grind Sizes
09:25 - Grind Time
thanks for showing examples of the ground consistencies as well as the clicks you used to achieve them!
just something i had trouble with when i had my first grinder!
This video was so useful!! I'm getting one soon, but I hadn't really seen many video reviews. Thank you!
Thank you! I hope you also watch out for my next reviews, you might find something useful to buy haha
thanks for showing clear instructions on how to calibrate ! more people need to know about this grinder, its really amazing for its price in a world full of premium handgrinders that do more or less the same for almost double the price and use more plastic in some parts. Hopefully the blade stays this sharp for long
Rany nasser thank you for appreciating my work! I hope more people see this grinder for it’s greatness too! 🖤🖤
This video made everything clear and simple. After calibrating, i realized i prefer to just tighten the calibration nut all the way and deal with the start not being at 0. Instead of remembering how many turns to set it to get my number to 0. I like the grinder!
Awesome - thank you - had reassembled wrong at first (didn’t see the small bearing so had that whole piece upside down). Was able to zero out the grinder no problem after watching this.
i am glad i was able to help!!! ENJOY THIS AWESOME GRINDER!
Awesome video. Concise and clear. Why can’t all videos be like this?
i am so glad you appreciated it! thank you so much! please enjoy my other videos
This video really shows the inside of the grinder, which makes it less alien of a thing for me. I'm not sure about adding WD40 though. It looks like you fully understand how to calibrate it, so if you can make a video on how to do it instead of talking about it would make me definitely watch you again. As for the number of clicks per rotation, you put 1 rotation = 10 clicks. I think it should be 40 clicks for a full rotation since each number is 4 clicks. Might want to correct your video. Even then, I think this made me understand my new grinder which arrived today, so thank you.
Thank you for this easy-to-follow disassembly-assembly video! My JX Pro is arriving soon and this video was in my recommended. Now I'll be more confident in handling my own grinder. Subscribed po!
PS would love to see Aeropress content on this channel din po hehe. Love from the South!
@@gierose omg u made my heart melt today! Dont worry im on it!!!
this video is the most easiest to understand , thank you ! happy brewing :))
u 2 luv!!
Thank you so much this is the only video which helped me
Expecting mine next week. Excellent informative video, thank you!
Mine is arriving tomorrow, can't wait! Thanks for a great tutorial.
Glad to help! 🖤🖤 ENJOYYYY
My name’s jeff and jeff approves your coffee
i miss making coffee for annoying jeff
Awesome video! I got mine recently too and totally love it!
cool beans, thanks for the video
Your video is really informative. Now i cleary understand how to disassemble the JX PRO. XIE XIE NI (Thank You).
06:11 -> Trust me, this exact part is why we're here
Thanks for the calibration tips. 👌🏼
I love this girl her first thought was to lubricate the shaft 🤣🤣🤣
very nice...enjoying my jxpro for months now pretty good for the price
Adrian Gonzales do you have plans of upgrading in the future?
partners well with my flair espresso
Adrian Gonzales this is exactly why i got the jxpro! I will be buying the flair soon which flair do you have?
@@fujiwara.kumik0 no plans to upgrade. Pretty happy with mine. got the Classic but upgraded the portafilter to a pro 2 version...best to get the Signature version right away because you will get an upgrade itch anyway hahaha just waiting for my aftermarket dosing ring and distribution tool from @ipoktala (IG)
Adrian Gonzales im eyeing the signature! i dont think ill be needing a large basket anyway, if i do need it someday, ill just get another brewhead. how do you preheat your basket?
Thank you, I just received my JX Pro today, and your diassembly video is extremely helpful since I'm kinda worried why the ring above the catch up bin also rotates while I was grinding. Turned out that was the outer burr. It's snug and tight now.
Great tutorial. 👏
Thank you! I strive to give my best! 🖤
😱😱😱 OMG! I been watching YT videos and reading the company’s technique for calibrating my 1Zpresso JE Plus (basically the same as the JE Pro regarding the grind size tuning) and almost lost all hope of zeroing in the darn thing.. that is, until you came along.. the life-saver that you are 😍
Many thanks!!
this comment warmed my heart! thank you!
Wow that's a dope grinder!
Ronjey not as dope as u my guy
thank you so much. your video was so helpful.
I've subscribed too
bo taleb awww you are sweet! Watch out for the other informational videos im putting out!
Just bought this grinder , hasn't arrived yet though. So I am here to learn some things. Your "terminology", was most enjoyable, -
this thing, that thing, this flat thing and the axle . The Calibration part of the video was a little fast, otherwise Nice Job !
Thank u hahahaahah! Remember not to use wd40!
@@fujiwara.kumik0 I use WD 40 ALL the Time, Just Never in the kitchen.
Hey, any time i calibrate my grinder unscrews and falls apart. Am i doing something wrong?
This is so wow, i wanted to have like this as well,. , thats handy and easy to use., .
Khai sarap GET IT HAHAH! its a grind tank! quieter than the timemore c2 and skerton, faster, and more consistent!
Is it fair to say everytime you clean this grinder, you'll probably need to recalibrate it, unless you just happen to get lucky?
My zero point was at 9, so therefore I adjusted the thumb nut 9 clicks counter-clockwise. Then somehow, my zero point became 3. Tried again: thumb nut 3 clicks counter-clockwise. Then, zero point became 2. Tried again: thumb nut 2 clicks counter-clockwise. That brought me back to 9. What am I doing wrong here?
Great grinder!!!
release your brand na so i can make a video!
Got a coffee grinder with aliexpress. From 1 to 9 clicks clings with one side of the millstone. And with only 10 clicks, it scrolls without touching. Do you think this is a marriage? In my opinion, the shaft is not even! I thought from the first click there should be free rotation if everything is well centered. I haven’t ground coffee yet and hasn’t taken apart. I don't know what to do, whether to return it to the seller or not.
Nice video, thanks!
hi george! i am glad you appreciated this video! i hope my other videos would give you enjoyment too hehe!
I think you should cut that part on WD40. some people might actually try that and end up ingesting it.
If you understand the purpose of those sealed bearings on the top and bottom of the tube you'll know there's literally no point in lubricating that shaft; even if you insist on lubing that part for no reason, there are food grade silicone based lubricants available in the market, even wd40 has them
I noted it down in the description.
I like how you just called the individual components whatever you wanted too, lol.
You made me watch this again omg im so shy haha!
@@fujiwara.kumik0 It's a serious coffee grinder, but it doesn't mean the video has to be serious as well. You were just being you, and so regardless of the video quality, I watched it to the end and enjoyed it! :)
@@mark-qi6di thank you for making my day!!! im super glad you enjoyed!
woah! i need that one. but owww so very cute and also good
Thank you, but i still not sure about Turkish grind, cause it should be like flour 1 bean of coffee makes 45k particles and this need a hard stone
i havent tried brewing turkish style so i can't tell
@@fujiwara.kumik0 thanks xiu hey am planning to get it for espresso how much time it take approximately for grinding a double shot
What background music is playing?
WOW 😍😍😍
hi there!
The result of the 8 clicks for Turkish doesn't seem too powder-y to me. Did you try to use it to make one? How was it?
Haven’t im sorry!
Wow, this is really good, barista really know what staff is really needed, beacuse thats a smart move to buy a grinder for home to always get a fresh brewed coffee from a freshly grind beans #khaisarap
Sitti sara Nasaluddin i knowwwww!!!
Decent vid but I feel like the camera is maybe too close.
Also WD-40 isnt really great to use as lube, instead get some ultra lube white non toxic
Yep! It’s in the description haha! Also noted the camera distance!
So for the zero caliberation, one full rotation of the knurled knob = 1 number on the outside ring (the one that shows the numbers)?
I will go ahead and post a separate calibration video soonnnn!!!
Please do, this is so frustrating!
I'm 1.5 numbers out (6 clicks), how many clicks should I go with the nut? /:
@@rbmanb for now, just pretend that the number your ring is tightest, is 0. Then count your intended clicks
@@fujiwara.kumik0 that's what I do, but it's a pain to count one and a half numbers every time /:
@@fujiwara.kumik0 when you post that video, make sure to mention how to calibrate by number of clicks! In all videos I've found including 1zpresso website, it says move the nut by how many numbers I'm out, but I'm out by 1.5 numbers!
I have some questions. Currently, I use C2 for flair pro2 (it takes very looooooooong time to grind it!) I am interest in JX pro, affordable and good price. However, I worry about its size. Is it difficult to grind for woman? Heavy? Smooth?
Its easier to grind with this one than the c2. I am a skinny girl and thats my opinion 😂
can you do timemore c2 assembly?
I will try!
Way too complicated for me. I may be returning it.
Do not use wd40 its a wet lube .
Use Action Can Dry PTFE 500ml
I'd like to see how to actually do the calibration instead of just talking about it :/ other than that I like the style of your video very much.
Is mean turn 1 round is one click right
No, love, the number “1” is 1 click, one whole rotation from “0” to “0” is 10 clicks
How about using mineral oil as a lubricant? It is food-safe (you can use it to seal wooden chopping boards) and it is less volatile than WD40, so it should last longer.
I have some! Ill try it!! 🖤
3:44 I can’t unscrew it off at all :(
NEED STRONG HANDS!
Came here to learn how to clean up my grinder, left learning how to lube up my shaft.
😂😂😂 DONT FORGET TO USE FOOD GRADE LUBE!
You do not put WD-40 on any part of the assembly inside.
Julius Lim whoops! Why not?
@@fujiwara.kumik0 it is not food grade. Not a lube actually in fact a degreaser. If you really really really want to prescribe wiping with lube, why not a thin layer of unsalted butter, or some animal fat 🙃
@@junikorkor i was confident in lubricating my grinder with non-food grade lubricant because the parts im lubricating DO NOT come in contact with the coffee beans because they go through a central shaft. are you familiar with this component in the jx pro?
@@fujiwara.kumik0 but when you assembled everything, you may touch the shaft (which does not contact the food as it is in the housing) with your bare hands. Then you may touch the steel burrs which contact the food material. So 🤷🏻♂️. And wd40 is not a lube. In fact it acts as degreaser. So put butter, animal fat, grapeseed oil or anything safe instead of wd40 or some nerve agent just because the shaft is inside the housing. 😌 anyways sorry for hijacking your channel. Cool video tho.
@@junikorkor wah,, i think im well trained in contamination control hehe, but i shouldnt expect everyone to be the same! will take note of this!
Yeah.. don’t use WD-40.
hahaha my guess is correct its a taiwanese and zpresso branded
James Black it is a damn good grinder!
first
😂