thank you for this clear video. I work as a health professional but very interested in maintaining my cars. I just changed oil in my W205 C class and filter, very easy to do. I do need to do the brake fluid too as it is a B service, so this video really helps. I have a vacuum bleeder that sucks the fluid from the bleeder side, but the video shows another good way to perform this operation. Senior Leigh is meticulous in his tools and doing everything right.
Again, the editing & camera work. You're an artist! Always nice to watch a clean & clear presentation no matter how high or low the difficulty of the job is.
So useful. I have a 2014 E350 wagon. I've learned so much from your instructional videos, Senior Leigh. And saved a lot of money. And the camera work and editing is masterful. Thank you for everything.
yep, bleeding the lines is a cake walk. While you have the wheels off to service the brakes, I would also lubricate the caliper slider pins with silicone grease (every 2 years). My W212 brakes got really hard after less than 3 years with factory lube
Thank you and I pumped the air into the tank to build a 2 bars pressure, the pressure air pushes the fluid into the reservoir, the air won’t be into the system.
Do you really need to take the wheels off? If you are able to raise the car high enough to get under, I believe you can access the bleeder Valves from behind the wheel. Please advise.
Senior Leigh, when you show the bleeding of each brake cylinder, is there any air pressure pushing the old fluid out or does it just come out with gravity? I thought you might have the power bleeder still hooked up with pressure built up
Senior Leigh I am now a subscriber as I just purchased a new to me 2014 E350. Looking forward to you videos. Transmission flush and fill with new filter would be a great tutorial. Lol
I have a question: After you manually fill the brake resivoir, you use the pump. Are you extracting the brake fluid or ?? I am a little baffled. Thanks
No need to extracting the fluid after bleeding, because the fluid level won’t change in the reservoir. The pump just added the pressure, the pressure is balanced between reservoir and the pump.
@@LeighSr So, after you pour the fluid into the reservoir, you pump more fluid per the pump to add pressure so the fluid comes out when the port is opened at the caliper? No air can get into the line? Just asking a couple of questions. Do like the videos you have and what software do you use for your repairs? Thanks.
@@johnschuldheisz9852 thank you and as I said the pressure is balanced between reservoir and pump, so the fluid will fill into the reservoir along with bleeding on the calipers.
I need Service D and the dealer wants $800 so I want to do it myself. They said Service D includes Oil change, brake fluid change, cabin and engine air filter change. And a bunch of checks.
Why do you use a computer as many videos I see for changing the oil, they just use the buttons on steering wheel to reset the maintenance schedule in the dash. Whats the reason for the computer?
Money Because I can see the maintenance information was recorded into the OBD with Star SD. I m not sure if the information was written in correctly by operating the buttons on the steering wheel. Next time I might use the buttons on the steering wheel and then checking with Star SD to confirm.
Hi Senior Leigh, I was wondering how much brake fluid did you use in this video? I am looking to flush out my W204 C300 as I have not done it for quite some time. Would 2L be enough fluid? Thanks!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Amazing video. No trash talking, just pure silent instruction well detailed video. This is how it should be.
Honestly dude, just came accross your channel today, You are amazing in your attantion to detail. Fantastic high quality job.
thank you for this clear video. I work as a health professional but very interested in maintaining my cars. I just changed oil in my W205 C class and filter, very easy to do. I do need to do the brake fluid too as it is a B service, so this video really helps. I have a vacuum bleeder that sucks the fluid from the bleeder side, but the video shows another good way to perform this operation. Senior Leigh is meticulous in his tools and doing everything right.
Again, the editing & camera work. You're an artist! Always nice to watch a clean & clear presentation no matter how high or low the difficulty of the job is.
I love this guy lol....no words just action 👍
每個動作不僅交代的清楚，而且動作中透著素養！讓人賞心悅目！
当完全操作过独自更换刹车油的步骤后，再来看李Sir的视频，由衷的感觉赏心悦目。
谢谢鼓励🙏
So useful. I have a 2014 E350 wagon. I've learned so much from your instructional videos, Senior Leigh. And saved a lot of money. And the camera work and editing is masterful. Thank you for everything.
Precise, perfect, and professional.
First class demonstration video AGAIN, and again
Another OUTSTANDING VIDEO!!! THANKS so much for sharing your knowledge!!
A really good video,
Proves how easy it can be !
yep, bleeding the lines is a cake walk.
While you have the wheels off to service the brakes, I would also lubricate the caliper slider pins with silicone grease (every 2 years).
My W212 brakes got really hard after less than 3 years with factory lube
I like the brake system you used! Great video
祝李 sir 新年大快樂😄
感谢❤️
也祝您新年快乐，幸福安康🌹
Fantastic video. Please may I ask what was the pc software....was it a workshop manual. If so where can I buy it?
Thankyou
Master class
Great video! Can you do one for a coolant change? :)
This video is ASMR to me
Nice video !!!!!!!!!!!!!!!!!!
感谢您分享这么精彩的影片！非常有参考价值～请问刹车卡钳那边的放油管处拧紧时需要多少N·m呢？
@Senior Leigh what tool do you use to remove old brake fluid from the reservoir. Thank you for the great videos!
W K siphoning, the power may from mouth or not mouth😂
Nice video! What was the PC software that was used?
great videos, i love them. But aren't you introducing air in the system by pushing fluid?
Thank you and I pumped the air into the tank to build a 2 bars pressure, the pressure air pushes the fluid into the reservoir, the air won’t be into the system.
Do you really need to take the wheels off? If you are able to raise the car high enough to get under, I believe you can access the bleeder Valves from behind the wheel. Please advise.
Thank you....
Great video! Which model DeWalt impact driver do you use? thank you
amzn.to/3xPKHjo
Nice video 👏
Perfect!
Great video tho
Do you have a link to the online repair manual?
How many Bar need before bleeding ?
Senior Leigh, when you show the bleeding of each brake cylinder, is there any air pressure pushing the old fluid out or does it just come out with gravity? I thought you might have the power bleeder still hooked up with pressure built up
From 3:00 you could see the power brake bleeder attached to the reservoir and keep 2 bars pressure.
Nice!
Sir. Where did you get the shaft that screws into rotor to assist with tire mounting?
That guide bolt came from the vehicle tool kit at the bottom of the trunk.
They sell em on Amazon
@@LeighSr indeed, but most owners do not know its usage!
Great video! Where can I buy the Mercedes diagnostic computer module that you use in your videos? Thx.
Alexander thank you, and I bought MB star SD connect C4 on: ebay.to/2NlYWWO
Great video! What is that tool you use to help guide the wheels back on? What size threads?
Thanks, the guide tool came from the vehicle tool kit that stays with the spare tire. M12 x 1.5 or M14 x 1.5 depends on your lug bolt.
Sold on Amazon as set of two. I purchased same size 17 as in this video. Works great.
请问你的电脑里面的维修手册是在哪里购买（获得的）？我就苦于找不到各种螺丝的torque spec。谢谢
我是在这买的 MB star SD connect C4: ebay.to/2NlYWWO 维修资料也都在那个电脑里。如果您需要什么资料可以到这个论坛发帖，我可以帮您查找并发上去 www.leighsr.com/forum
Do you have to press the brake before you drive after ?
Not necessary, the pressure always there.
Great video but how long do you keep bleeder screw open?
tpdtopcop2010 thank you. I just keep the bleeding screw open until I saw the color of fluid clear like new.
Senior Leigh I am now a subscriber as I just purchased a new to me 2014 E350. Looking forward to you videos. Transmission flush and fill with new filter would be a great tutorial. Lol
tpdtopcop2010 thank you for subscribing. And yes I will preform the transmission fluid replacing next week. The all of material is ready.
Senior Leigh fantastic!!😀
I have a question: After you manually fill the brake resivoir, you use the pump. Are you extracting the brake fluid or ?? I am a little baffled. Thanks
No need to extracting the fluid after bleeding, because the fluid level won’t change in the reservoir. The pump just added the pressure, the pressure is balanced between reservoir and the pump.
@@LeighSr So, after you pour the fluid into the reservoir, you pump more fluid per the pump to add pressure so the fluid comes out when the port is opened at the caliper? No air can get into the line? Just asking a couple of questions. Do like the videos you have and what software do you use for your repairs? Thanks.
@@johnschuldheisz9852 thank you and as I said the pressure is balanced between reservoir and pump, so the fluid will fill into the reservoir along with bleeding on the calipers.
Works well with a 2014 E350. Did mine today :-)
Is this procedure the same as changing brake fluid on the 2013 W221 ?
I need Service D and the dealer wants $800 so I want to do it myself. They said Service D includes Oil change, brake fluid change, cabin and engine air filter change. And a bunch of checks.
Only difference is bleeding sequence, you might see my other video for 2012 W221 th-cam.com/video/XZj90SUxEws/w-d-xo.html
Why do you use a computer as many videos I see for changing the oil, they just use the buttons on steering wheel to reset the maintenance schedule in the dash. Whats the reason for the computer?
Money Because I can see the maintenance information was recorded into the OBD with Star SD. I m not sure if the information was written in correctly by operating the buttons on the steering wheel. Next time I might use the buttons on the steering wheel and then checking with Star SD to confirm.
You're very good with a camera and editing.
What size hose attaches to the bleed nipple? I have heard 1/4"?
Yes, ID 1/4”
@@LeighSr thank you
同時我用完brake power bleeder 後假如想邦家人換 Toyota camry 由於是不同廠 Mercedes Benz / Toyota 出的 oil 這可以嗎?
可以，残留的量非常少，不会有影响的。
@@LeighSr Thank you 👍
Hi Senior Leigh, I was wondering how much brake fluid did you use in this video? I am looking to flush out my W204 C300 as I have not done it for quite some time. Would 2L be enough fluid? Thanks!
The capacity of the brake system is 0.5 liter for w212. I consider the w204 is same. I used 1 liter (bottle) of brake fluid, because bleeding.
我有個問題請問最後用Troque wrench 是多小 pounds feet ???因為我看不到的謝謝
在 0:54 处，18Nm (13.2 Ib-ft)
@@LeighSr thank you
李 sir 你在美国？ 我在温哥华
@@eddielam9750 我在南加州🤝
what is the size of that bleeder bolt ?
Qian Xu 8mm
李Sir 我有兩個問題想問第一C係車換一次brake fluid 要多小公升?第二brake power bleeder 用完後怎様清理軟管裡的油等二年後再換時是全新brake fluid 呢
1，整个刹车系统里的容量是0.5升，我每次用一整瓶（1升装），多出来的是用在bleeding上；
2，bleeder里的油倒出来就行了，揣几下bleeder，软管里的残油就吹出来了，不用清理得像新的一样，两年后再倒入新油不会有影响的。
@@LeighSr 謝謝李sir
李sir 你好 , 我訂了 power bleeder 但 adpeter 不fit 我 C class 的． 請問可邦我嗎
如果您买的是我推荐的，是肯定匹配的。欧洲车的接口都是一样的。
@@LeighSr 因為我不知道有分別的我只是在 Amazon 買的 . power bleeder 盒上寫 model 0107 , 而 adapter 寫 1107 Ford Three Prong Adapter
@@eddielam9750 要买for euro 的
@@LeighSr ok thank you 👌
😲 wow
can't see very clear how many lb/ft you using ?
I will push every details on Leighsr.com
请问w211的SBC的刹车也可以这样换吗？
没问题，都是一样的步骤，只是注意排气的顺序，按照四个轮子距离ABS泵的距离，由远及近地排气。
@@LeighSr 太感谢了，那我自己可以在家换了不用跑修理厂了