Mr. Scout Crafter, you definitely put us through the drill! I loved this project. I used one of these with an older mentor neighbor while in elementary school. I’ve thought about finding one of these to teach my grandchildren about how much the world has changed in such a small amount of time, and that ingenuity is the real lever to reduce work and make new things possible. To some it is a silly looking tool (a la egg beater), but truly an elegant tool for the time. Thanks for these videos - I can feel my blood pressure drop and relaxation flow as I watch these!
I got into restoring tools as a hobby couple years ago after seeing a few different guys on here doing it. Since I found your channel a few months ago you have become my hands down favourite tool restorer on TH-cam. I love watching the process, seeing the results, and learning all kinds of great tips and tricks along the way. Thanks.
Hello AJ! Thankyou so much!!! I really appreciate that!!! I hope I can pass on some good tips and better yet help you learn from my mistakes!!! LOL Thanks again!!!
ScoutCrafter - The best channels are those like yours where mistakes are occasionally made and we all learn from them. On too many channels the uploaders edit out the errors, present themselves as having done a perfect job the first time. You always find the solution, sometimes after trial and error, and that is what makes you a master craftsman in my opinion; you just work it out. Always learning... thank you.
I had a summer heat wave that rusted all of my tools in my shed i did not notice till it had destroyed everything . After watching your vids i restored everything . Even an old vice that was nothing but a frozen pile of rust . You have saved all of my tools . I love watching your vids .
Hello Willie!!! Best story yet!!! That is awesome!!! Steel is hard to keep rust free outside but with a little work we can conquer the rust!!! Thanks so much!!! 😃👍
Thanks for the good memories of playing with one of those when I was 4 years old. I didn't know what it was but it was fun. Great work. I like that you were able to keep the red dye.
Hello Mary! I think we all used to love playing with them as kids!!! It was a tool that we really couldn't hurt ourselves with! Lol. The only difference is I still like playing with them!!! I think I like toys just as much now as when I was a child! 😃. Thanks very much Mary!!!!
Wonderful transformation!! I especially liked the way you used the tin strip to protect the wood and the method to grip onto the threads. Those are very smart tips.
I actually picked up two hand drills recently and one of the chucks is frozen. Thanks to you, I now know a great method to free it up. Thank you for sharing your skills👍👏
Hi ScoutCrafter. I tried your method tonight and it worked like a charm. Knurling intact! Now I have to figure how to get the tapered end of the chuck unscrewed from the rest of the barrel. Not much of a cylinder to grab onto. Thanks again!😀👍
Hello Muenster Cheez! The funny thing is the drill cost $2 but there was $40 labor... Lol! You have to enjoy it because if you think of doing this for a living or profit it gets difficult! 😃. Thanks so much!!!!
I am literally restoring an old Craftsman egg beater and had the same frozen issue. I could have walked away at 1:57 with all I needed to know. Wonderful.
Great Video as usual. The aluminum can protection strip application is perfect. I've had multiple tape failures when wire brushing, damaging plastic, rubber, and wood surfaces. Super tip ScoutCrafter, thank you.
Hello Greg!! Me too!!! I wound up wrapping a few layers of tape but still it can't take the abrasion! The aluminum can works quite well! Thanks so much!!! 😃👍
Hello 357magdad! The stripper will tend to loosen a layer at a time, so when you apply it you don't let it sit too long and remove it, it will leave the top coat, which in this case was clear, rubbery- then just scrape it off with a razor blade the stain has penetrated into the wood so if you are careful you can just get off the top coat! Stripper and a razor blade work great!!! Thanks!!!
I have a Thor Hand Drill - doesn't look like the same quality as this Mohawk-Shelburne, but it has two pinion gears and an extra knob on the side - I'm guessing you would put the handle to your chest and right hand on the knob while drilling? Anyway, it is in the queue for restoration - and it looks like I'm going to get to use some red paint!
Yes! The breast plate was very useful for additional pressure! All the hand drills took quite a while to master, that's why sharp drill bits were a must! Now with power drills you can bore with anything!!! =)
Lots of useful clever tips as usual. You certainly brought it back to (better than) original condition. And to crown it all you are a historian of tools. Congratulations from France.
Hello Will! Imagine being able to go back in time and walking into a hardware store!!! Wow! We would be in our GLORY!!! Look up "Harry J Epstein Co." It is an old hardware store that still has tons of NOS tools and supplies!!! Really cool!!! Thanks!!!
I don't think of them as weird ...it's just that you have a large range of tools in the US. that did not make it to our shores especially from the first half of the 20th century. btw.. Respect to you for being a courteous gentleman.
This is the first video I've seen of yours, but it won’t be the last. Absolutely packed with great tips, which I will hopefully remember for the future. I found a "as new" Stanley 803 for £4 recently and I’m shocked myself just how often I use it in preference to any of my electric drills. Thank you for uploading this.
I always liked the egg beater hand drills so this is my favorite tutorial. It looks fantastic! You have restored not only a tool but a small piece of history. I learned a lot from this video.
I live in Western Massachusetts and my Grandfather worked at Millers Falls Tool (which I believe made the Mohawk Shelburne line) for many many years. It's almost weird to see these tools as if they are new again but very cool! The old Factory is still there, a hollow shell of it's former life. Keep up the great work and great videos!
Wow! I bet your Grandfather had a ton of great stories! Millers Falls was one of the premier producers of tools and tooling for many years! Their quality and design were second to none! If I could only collect one tool manufacturer's products it would be Millers Falls!!!!! Great stuff! Thanks so much!!!!!!!!
Oh he had stories alright. The area is pretty saturated with Millers Falls, GTD, and Starrett Tools at local garage sales and flea markets for cheap. Everyone's father and grandfather worked in those factories and their tools are still around, even I have a few old sets and boxes myself. If there is something specific that you are looking for I bet I can stumble across it, not that it looks like you need tool hunters.
Hello S Dodge - I truly love stories like that! My buddy lived on Long Island in the late 60's, he used to go thru the dumpster at the Aurora company! They made Slot cars and all types of cool models... He used to get lots of useable stuff!!! 😃👍
I was wondering if you would relubricate it with oil or grease, and you answered my question. Then I wondered if you should use pliers to free up the chuck, and you answered the question for me on that also. I have a hand drill that was frozen, but a few drops of dripless oil and I was able to free it up with pliers, but didn't do any damage to the machining on the chuck. These drills are built to last a few life times, unlike modern tools. Thank you for making this video.
Hello Paul! Lol on the old bottle of locktite! I remember buying that! The best thing is it still works! What other product doesn't dry out after 20 years?!? Good stuff! Thanks so much!!! 😃👍
That was an amazing restoration. Who would have thought to use scrap wood as a clamp. You’re like the MacGyver of tools! And guess what I’m proud of my New Yawk accent I hope you are also. Great job!
H Frank!!! You know for many years I was embarrassed about my accent... As you know Frank our area of Queens had a very "unique" accent! LOL However once I hit 50 I guess I came to grips with who I am... Limited education, Blue Collar, son of a truck driver... We're in a good place! I wouldn't go do it over any different if I could. =)
ScoutCrafter wow a flash back from childhood. idk if my Dad or Grandfather had 1 i do remember seeing in person and wondered how they used this all day long. thank you sir... Bobby
Hello Blackie! There has to be some use for all those scraps we have laying around the shop that we can't bring ourselves to toss!! LOL Thanks so much!!!!
Awesome video. I just subscribed last week. I just started on a Millers Falls number 2 yesterday. The lower gear was frozen. It took an all day soak in atf/acetone plus gently clamping the gear in the vise between blocks. A good twist freed it up. I hope it cleans up as good as yours. Looking forward to more videos.
That is a great tip about drilling the wood out and splitting it; I learn something new every video :). Great restoration!!! Those wood handles really came out nice. Cheers, Joe
Hello Joe!!! That little wood tip saved my A$$ on more then one occasion!! Lol. A reason to use the two thousand pieces of scrap wood I can't convince myself to throw away!!! Lol. Thanks!!!! 😃👍
Hello Brian!!!! Those knurlings are so fragile! Any wrench at all will damage the surface! This is a great way for us to use all those scraps we accumulate!!!! LOL Thanks so much!!!!!
I have an idea I'd like your opinion on. I have one of those Park/Parker? screwdrivers with the wood inserts on the handle. The wood is really chewed up with very deep gouges. I was thinking I could mix up some two-part epoxy with a little colored dye powder, and fill the voids. Then I could finish it to a shine. What do you think? I'm a beginner and I've never worked with epoxy, but I really want to, and it's not like this tool is valuable.
Yes!!! Brian- Epoxy is great!!! You can also take small pieces of wood and glue them into the voids! You can always sand it down!!! You would be shocked at how you can fix big problems with glue or epoxy! Another great tip is mixing sawdust with yellow glue and filling voids! =)
The wood clamp tip is great; a great project as always. Could you show us a little more of the painting and handle finishing parts of these projects. Thanks again for another winner!
Beautifully done. I have three or four antique hand brace drills with the hardwood handles. They need some attention. I'd love to see you restore one! Thanks for the videos.
Loving this restoration! I have three eggbeater drills that are a bit younger than that one, but i'd love to get one of these old ones with a curvy spoked wheel (don't know the terminology) like that one. I use my favorite eggbeater all the time, often i choose it over the cordless electric for precision work as it's never going to get away from you. And if i need to pre-drill a single hole, like to hang a photo on the wall, it's my go-to because i don't have to worry about charging it. It's funny, a guy i work with a few years back asked if i had a cordless drill he could borrow, so i brought in my egg beater. He wouldn't use it, he looked at me like i was from outer space, and wouldn't use it. He had to drill 8 little 1/8 inch thick holes through soft pine, I didn't have a power drill at the time, but today i wouldn't bother pulling it out to charge for even that many holes in pine as i've gotten so used to the egg beater. A sharp bit and physics, they really work well together. Now i have to search back through your vids to see if you've done antique saw restorations. I've got a few hand saws that have rust, but i want to try to save the lettering on them, so wire wheel would be a bit harsh.
Hello Poor Cousin's DIY! You are so right!!! I hate battery ANYTHING!! Planned obsolescence at it's best!! As for the saw! I have done a couple but not on video, I will soon! The best way is to use a chemical rust remover, that will make the rust easier to remove then you can address the pits!! The writing is so nice on them you don't want to lose it!! Thanks so much!!! 😃👍
Yeah, I love watching Sellers too. I do have an old sawset so i can adjust the kerf on the blade and i have watched Sellers videos on sharpening and setting the kerf and as Will suggests, they're a great resource. I just looked through that list and i don't see anything for bringing back an old neglected hand saw, so i'll be waiting for the ScoutCrafter video with anticipation! Maybe someday i'll even get around to making my own videos . ... maybe
Beautiful job looks beautiful worth more than $2 now learn something new with the wood clamps thank you for the idea keep up with the videos great job God bless you and family
An ugly duckling turned into a beautiful swan. I was drooling at the end of the video as the drill looked so good. Just picked up a carpenters tool chest with tools for £12 at the car boot sale. The guy that had it painted it bright pink and I bet he got some comments on site but no-one was ever going to steal it!. I am looking to restore the chest and put original vintage tools in there, my only thought is whether to keep it pink or my preferred colour of British Racing Green (I think you would call it Hunter green or dark Brunswick green). Take care and as always, a HUGE thumbs up.
Hello Tony! You know I love Hunter Green!!!! (and Red too if you didn't know) I did like the pink on Lady Penelope's Car! ;) Thanks Tony!!! And yes! I've seen all the Thunderbirds!!!
That came out VERY nice. I think I have an old hand drill to at least try to clean up. No idea how fully I can restore it but it'll be fun to try. Thanks for the shoutout by the way!
Alan! With all those goodies you got today you will be busy for quite a while!!!! I hope you restore that little anvil soon!! That is sweet!!!! Thanks!!!!!
ScoutCrafter I think all I'm going to do with the anvil is wire brush it like a madman and flatten the deck out with the sander. I like keeping patina on my anvils, but I don't care for patina on literally anything else.
ScoutCrafter That would be my turn-of-the century Peter Wright. If I had prize posessions they'd be that anvil and the .45 I got from my uncle the last time I saw him alive.
Nothing like the old egg beaters for small drill bits..The hand feel thats missing on electric drills leads to the snapping of fine drill bits...For any small work it's a must have.
This is so funny I just whatched this video last night and today I went to my local flea market and found the exact same drill. So I had to buy it ajdnnow it is in pieces being restored. Your videos are awesome keep it up!
Hello Mason!!! They take some time to restore because of the parts but in the end it is a very satisfying project! I'm so glad you enjoyed the project!!! Thanks so much!!!
It's funny but I never sell anything... I've given a lot of stuff away, especially to Scouts, but I just always felt strange about selling! I don't know why! =)
I have this exact hand drill that I have used for years. Where it excels is drilling small holes in plastic components in automobiles and motorcycles (e.g. 1/16" dia. drain holes in plastic head lamp covers that have had water leak into them). A delicate touch is sometimes needed and the hand drill can often be gotten into places that a corded/battery pistol drill won't. You've made me feel bad though...to save face I guess I'll have to clean mine up and repaint it. Sometimes you just have to keep up with the Joneses and the ScoutCrafters.
Hello Aceroadholder!!! Not at all!!! As long as the drill is not rusty and oiled so it doesn't squeak, you are golden!!! I love tools that are "Used" all the time and are worn but not rusty! I always liked that look!!!!! Thanks so much!!!!!!!!
Hello Jusb! You know I restored the countersink and sharpened it but it's a single flute arrangement and they work best in power applications, I would like a nice multi-flute bit for this hand drill!!! Thanks so much!!! 😃👍
yes you do get tools with things thrown together, i think my stanley hand drill had a brace screwdriver bit shoved in it! who knows who thought that would work!
I am old enough to remember using one of these, I can't remember the last time I've seen one though, I still have a bit & brace, I like to use when I get the chance.
Very nice restoration. I appreciate guys like you keeping the old tools alive.
Mr. Scout Crafter, you definitely put us through the drill! I loved this project. I used one of these with an older mentor neighbor while in elementary school. I’ve thought about finding one of these to teach my grandchildren about how much the world has changed in such a small amount of time, and that ingenuity is the real lever to reduce work and make new things possible. To some it is a silly looking tool (a la egg beater), but truly an elegant tool for the time. Thanks for these videos - I can feel my blood pressure drop and relaxation flow as I watch these!
I got into restoring tools as a hobby couple years ago after seeing a few different guys on here doing it. Since I found your channel a few months ago you have become my hands down favourite tool restorer on TH-cam. I love watching the process, seeing the results, and learning all kinds of great tips and tricks along the way. Thanks.
Hello AJ! Thankyou so much!!! I really appreciate that!!! I hope I can pass on some good tips and better yet help you learn from my mistakes!!! LOL Thanks again!!!
ScoutCrafter - The best channels are those like yours where mistakes are occasionally made and we all learn from them. On too many channels the uploaders edit out the errors, present themselves as having done a perfect job the first time. You always find the solution, sometimes after trial and error, and that is what makes you a master craftsman in my opinion; you just work it out. Always learning... thank you.
I have mastered one thing... Mistakes!!!!! LOL Thanks!!!!!!!!
AJ, as Scoutcrafter would say “ you are so right”. I have also been a subscriber for the past three months and I agree with you 100%
Really great idea with the wood clamp. I love learning new things.
Hello David! Awesome!!! That little trick saved my a$$ many a time!! Lol Thanks so much!!!!!
Fantastic. Even the sound of the mechanism when you were spinning it... like butter! Great vid.
I had a summer heat wave that rusted all of my tools in my shed i did not notice till it had destroyed everything . After watching your vids i restored everything . Even an old vice that was nothing but a frozen pile of rust . You have saved all of my tools . I love watching your vids .
Hello Willie!!! Best story yet!!! That is awesome!!! Steel is hard to keep rust free outside but with a little work we can conquer the rust!!! Thanks so much!!! 😃👍
I've cleaned up plenty of these, and I still learned a lot of new things in this video. Thanks for sharing.
Thanks for the good memories of playing with one of those when I was 4 years old. I didn't know what it was but it was fun. Great work. I like that you were able to keep the red dye.
Hello Mary! I think we all used to love playing with them as kids!!! It was a tool that we really couldn't hurt ourselves with! Lol. The only difference is I still like playing with them!!! I think I like toys just as much now as when I was a child! 😃. Thanks very much Mary!!!!
Fantastic result. Great to see a demo of the drill in use.
Wonderful transformation!! I especially liked the way you used the tin strip to protect the wood and the method to grip onto the threads. Those are very smart tips.
Hello Steve! I'm so glad you enjoy the little tips because I really think it can help people that never did this before!!!! Thanks so much!!!!!
I actually picked up two hand drills recently and one of the chucks is frozen. Thanks to you, I now know a great method to free it up. Thank you for sharing your skills👍👏
Hello Steve! That was a common problem! Remember no matter what don't screw up the knurling!!! LOL Thanks!!!!
Hi ScoutCrafter. I tried your method tonight and it worked like a charm. Knurling intact! Now I have to figure how to get the tapered end of the chuck unscrewed from the rest of the barrel. Not much of a cylinder to grab onto. Thanks again!😀👍
I am always amazed at your ability to save the tools in your videos. And your tips are ingenious!
Amazing what you do. Especially explaining how much the item cost. Please don’t ever stop.
Hello Muenster Cheez! The funny thing is the drill cost $2 but there was $40 labor... Lol! You have to enjoy it because if you think of doing this for a living or profit it gets difficult! 😃. Thanks so much!!!!
Impeccable restoration. Make US of A vintage tools great again! 🇺🇸
Hello Crippleman!!!! Thanks so much!!! These are always nice for show and tell!! =)
so nice and shiny and the paint makes it look great ..Thanks for the tip on using the piece of wood to hold parts
I am literally restoring an old Craftsman egg beater and had the same frozen issue. I could have walked away at 1:57 with all I needed to know. Wonderful.
Can't get enough. Addicted. +1 for 15 minute videos!!!!!! They are so great. I can't get enough
Hello JimmysTheBestCop! I am so happy to hear that!!! Thank you!!!!!
Have you ever did any kitchen or pocket knife restore jobs? Be interesting to see your take if you ever run out of old tools lol
Nice I love these old drills thanks for sharing 👍
Thank you for the useful tricks. I've never heard of the soda can trick.
Great Video as usual. The aluminum can protection strip application is perfect. I've had multiple tape failures when
wire brushing, damaging plastic, rubber, and wood surfaces. Super tip ScoutCrafter, thank you.
Hello Greg!! Me too!!! I wound up wrapping a few layers of tape but still it can't take the abrasion! The aluminum can works quite well! Thanks so much!!! 😃👍
Nice how you were able to preserve the original stain on the handle. Your project came out really nice!
Hello 357magdad! The stripper will tend to loosen a layer at a time, so when you apply it you don't let it sit too long and remove it, it will leave the top coat, which in this case was clear, rubbery- then just scrape it off with a razor blade the stain has penetrated into the wood so if you are careful you can just get off the top coat! Stripper and a razor blade work great!!! Thanks!!!
I have a Thor Hand Drill - doesn't look like the same quality as this Mohawk-Shelburne, but it has two pinion gears and an extra knob on the side - I'm guessing you would put the handle to your chest and right hand on the knob while drilling? Anyway, it is in the queue for restoration - and it looks like I'm going to get to use some red paint!
Yes! The breast plate was very useful for additional pressure! All the hand drills took quite a while to master, that's why sharp drill bits were a must! Now with power drills you can bore with anything!!! =)
Lots of useful clever tips as usual. You certainly brought it back to (better than) original condition. And to crown it all you are a historian of tools. Congratulations from France.
Hello David!! Thanks so much my friend! This one wasn't too bad to start but always fun to see it back in service! Thanks again!!!!!
Gorgeous, brings tears to my eyes, looks like you'd just picked it off of the shelf in a hardware store in 1925.
Hello Will! Imagine being able to go back in time and walking into a hardware store!!! Wow! We would be in our GLORY!!! Look up "Harry J Epstein Co." It is an old hardware store that still has tons of NOS tools and supplies!!! Really cool!!! Thanks!!!
Nice restoration, John, as usual. You always do a great job of explaining things and giving good tips..
At last a tool I've seen...almost...I have a Stanley version. Great restore again Scout.
Hello Michael! Lol! They don't have to be rare or unusual to have fun! I know it seems like I only have wired tools here! 😂. Thanks so much!!! 😃👍
I don't think of them as weird ...it's just that you have a large range of tools in the US. that did not make it to our shores especially from the first half of the 20th century. btw.. Respect to you for being a courteous gentleman.
Thanks Michael!!!!
Fab win already @1'50". Going to watch the rest! Cheers.
You did a very good job restoring that hand drill. This is a also a very informative tool video.
Really cleaned up nice better than new, nice job!
Like magic, brand new. Really nice. Thanks again supper stuff. The wood ready pops!
Hello norherman! Finally a project that "required" Red!!! Lol. Can't blame me for this one!!! 😃👍. Thanks!!!!
I love the non-marring clamp technique!
This is the first video I've seen of yours, but it won’t be the last. Absolutely packed with great tips, which I will hopefully remember for the future.
I found a "as new" Stanley 803 for £4 recently and I’m shocked myself just how often I use it in preference to any of my electric drills.
Thank you for uploading this.
So nice to see your TH-cam channel finally taking off! Well-deserved! amazing job on this piece.
Hello Carlos!!! I am so glad people are interested in these simple tools!!!! Thanks so much!!!!!!
Not only the tools, but your process also! The restorations are great!
Thanks for the wood clamp tip.I'll be keeping that filed away for future use....cheers.
Hello Darrin!!! Yes! The knurling is very fragile and damages easily! Thanks so much!!!!!!
I always liked the egg beater hand drills so this is my favorite tutorial. It looks fantastic! You have restored not only a tool but a small piece of history. I learned a lot from this video.
Hello John ! Thanks so much!! These little drills are always lots of fun to fool around with!!! 😃👍
I live in Western Massachusetts and my Grandfather worked at Millers Falls Tool (which I believe made the Mohawk Shelburne line) for many many years. It's almost weird to see these tools as if they are new again but very cool! The old Factory is still there, a hollow shell of it's former life. Keep up the great work and great videos!
Wow! I bet your Grandfather had a ton of great stories! Millers Falls was one of the premier producers of tools and tooling for many years! Their quality and design were second to none! If I could only collect one tool manufacturer's products it would be Millers Falls!!!!! Great stuff! Thanks so much!!!!!!!!
Oh he had stories alright. The area is pretty saturated with Millers Falls, GTD, and Starrett Tools at local garage sales and flea markets for cheap. Everyone's father and grandfather worked in those factories and their tools are still around, even I have a few old sets and boxes myself. If there is something specific that you are looking for I bet I can stumble across it, not that it looks like you need tool hunters.
Hello S Dodge - I truly love stories like that! My buddy lived on Long Island in the late 60's, he used to go thru the dumpster at the Aurora company! They made Slot cars and all types of cool models... He used to get lots of useable stuff!!! 😃👍
I was wondering if you would relubricate it with oil or grease, and you answered my question. Then I wondered if you should use pliers to free up the chuck, and you answered the question for me on that also. I have a hand drill that was frozen, but a few drops of dripless oil and I was able to free it up with pliers, but didn't do any damage to the machining on the chuck. These drills are built to last a few life times, unlike modern tools. Thank you for making this video.
I wish I had your experience. Great video...and the old bottle of Locktite, very cool.
Hello Paul! Lol on the old bottle of locktite! I remember buying that! The best thing is it still works! What other product doesn't dry out after 20 years?!? Good stuff! Thanks so much!!! 😃👍
Geezz, I love the wooden makeshift clamp idea! Very clever.
Hello Felix! I screwed up so many knurls before I figured that one out!!! Nothing worse then a mangled up knurl!!! Lol. Thanks Felix!!!
Another, better than new resto. Great job.
Hello Iwood1- I'm so glad it was RED to begin with! LOL Thanks so much!!!!!
ScoutCrafter taping off the gear on ring must have taken a long time
Yes, you're so right! I hate taping!!! Lol!!!
u should open up a vintage tool museum. u have such an amazing collection
Hello Lee! They are a lot of fun to fool around with! I'm so glad other are starting to restore tools too! Thanks so much!!!
That was an amazing restoration. Who would have thought to use scrap wood as a clamp. You’re like the MacGyver of tools! And guess what I’m proud of my New Yawk accent I hope you are also. Great job!
H Frank!!! You know for many years I was embarrassed about my accent... As you know Frank our area of Queens had a very "unique" accent! LOL However once I hit 50 I guess I came to grips with who I am... Limited education, Blue Collar, son of a truck driver... We're in a good place! I wouldn't go do it over any different if I could. =)
As always very instructive and awesome lessons along the way. Keep them coming sir!! - THANKS
Hello J Monte!!!! Thanks very much!!!!!! I really appreciate that!!!!!
ScoutCrafter wow a flash back from childhood. idk if my Dad or Grandfather had 1 i do remember seeing in person and wondered how they used this all day long. thank you sir... Bobby
Hey Bobby! That was our favorite "toy" when we were kids!! We all loved to play with it!! Lol. Thanks so much!!! 😃👍
Love that expensive vise clamp....ingenious..learn something everyday..thank You
Hello Blackie! There has to be some use for all those scraps we have laying around the shop that we can't bring ourselves to toss!! LOL Thanks so much!!!!
Beautiful restore!
Have enjoyed watching the last several months. You have inspired me to start restoring tools I have collected.
You do a first class job. Keep it up.
I am so happy to hear that you are enjoying this great hobby!!!! It really is so satisfying!!! Thanks so much!!!!!!!!
I just picked up one of these for $1 I can’t wait to refinish it.
Scout, beautiful work. Again, it looks brand new. Great tip with the wooden clamp technique. You work wonders!!!!
Hello Pops!!! I'm so glad you enjoyed the project!!!! That wooden "clamp" saved me more then once!!! =) Thanks very much!!!
Boy oh boy that is fantastic! Great resto as always and great tips. Who would have guessed you'd go with the red...lol
Hello Bernie!!! This time you can't blame me!!!! LOL It was there to begin with! =D Thanks!!!!!!!!
Wow, beautiful piece!
Another beautiful tool ( Doug in GA) thanks for the video 🐈
Awesome video. I just subscribed last week. I just started on a Millers Falls number 2 yesterday. The lower gear was frozen. It took an all day soak in atf/acetone plus gently clamping the gear in the vise between blocks. A good twist freed it up. I hope it cleans up as good as yours. Looking forward to more videos.
So many helpful tips you crammed into a short video!
Thanks so much!
That is a great tip about drilling the wood out and splitting it; I learn something new every video :). Great restoration!!! Those wood handles really came out nice. Cheers, Joe
Hello Joe!!! That little wood tip saved my A$$ on more then one occasion!! Lol. A reason to use the two thousand pieces of scrap wood I can't convince myself to throw away!!! Lol. Thanks!!!! 😃👍
Ninety seconds in and your wood clamp mod is genius!
Hello Brian!!!! Those knurlings are so fragile! Any wrench at all will damage the surface! This is a great way for us to use all those scraps we accumulate!!!! LOL Thanks so much!!!!!
I have an idea I'd like your opinion on. I have one of those Park/Parker? screwdrivers with the wood inserts on the handle. The wood is really chewed up with very deep gouges. I was thinking I could mix up some two-part epoxy with a little colored dye powder, and fill the voids. Then I could finish it to a shine. What do you think? I'm a beginner and I've never worked with epoxy, but I really want to, and it's not like this tool is valuable.
Yes!!! Brian- Epoxy is great!!! You can also take small pieces of wood and glue them into the voids! You can always sand it down!!! You would be shocked at how you can fix big problems with glue or epoxy! Another great tip is mixing sawdust with yellow glue and filling voids! =)
Thank you!
The wood clamp tip is great; a great project as always. Could you show us a little more of the painting and handle finishing parts of these projects. Thanks again for another winner!
Hello Anonymous! Absolutely! There was a lot of questions on that part!!! Will do my friend!! Thanks very much!!!
BRILLIANT, and gorgeous results!
Thanks so much! I really appreciate that!!!!!
Love the little tricks great video.
Nice! Wood clamp tip is the why didn't I think of that deal.
You know the Knurling damages so easily! Once it's screwed up it looks horrible! This little trick really works well!!! Thanks so much!!!!
Another lovely restoration.
Thank you
Hello Gordon!!! Thankyou!!!! $2 for the drill and $40 labor! LOL Thanks again!!!
Good job. Turned out beautiful
Hello William! Thanks so much!!! I'm so glad you enjoyed the project! 😃👍
Nice job, it now looks like you just niped into the shop and brought a new one!!
Hello Tony! These older castings were made so well that they clean up really nice! A joy to work on!!! Thanks!!!!
Always better than expected
What a piece of art!
Beautiful job
Another great restoration Scoutcrafter keep up the great work and videos 😀👍🏻
Hello Ocelot!!! Thanks so much!!!! You are always very supportive!!! =D
Beautifully done. I have three or four antique hand brace drills with the hardwood handles. They need some attention. I'd love to see you restore one! Thanks for the videos.
Hello Christina! They make great restoration projects!!! Easy and fun!!! Thanks so much!!!!!!
Loving this restoration! I have three eggbeater drills that are a bit younger than that one, but i'd love to get one of these old ones with a curvy spoked wheel (don't know the terminology) like that one. I use my favorite eggbeater all the time, often i choose it over the cordless electric for precision work as it's never going to get away from you. And if i need to pre-drill a single hole, like to hang a photo on the wall, it's my go-to because i don't have to worry about charging it. It's funny, a guy i work with a few years back asked if i had a cordless drill he could borrow, so i brought in my egg beater. He wouldn't use it, he looked at me like i was from outer space, and wouldn't use it. He had to drill 8 little 1/8 inch thick holes through soft pine, I didn't have a power drill at the time, but today i wouldn't bother pulling it out to charge for even that many holes in pine as i've gotten so used to the egg beater. A sharp bit and physics, they really work well together. Now i have to search back through your vids to see if you've done antique saw restorations. I've got a few hand saws that have rust, but i want to try to save the lettering on them, so wire wheel would be a bit harsh.
Hello Poor Cousin's DIY! You are so right!!! I hate battery ANYTHING!! Planned obsolescence at it's best!! As for the saw! I have done a couple but not on video, I will soon! The best way is to use a chemical rust remover, that will make the rust easier to remove then you can address the pits!! The writing is so nice on them you don't want to lose it!! Thanks so much!!! 😃👍
Check out Paul Seller's channel for how to take care of saws.
th-cam.com/users/PaulSellersWoodworksearch?query=saw
Seller's is great! What a class act!!!!
Yeah, I love watching Sellers too. I do have an old sawset so i can adjust the kerf on the blade and i have watched Sellers videos on sharpening and setting the kerf and as Will suggests, they're a great resource. I just looked through that list and i don't see anything for bringing back an old neglected hand saw, so i'll be waiting for the ScoutCrafter video with anticipation! Maybe someday i'll even get around to making my own videos . ... maybe
Nah, remember, Scout uses old hand saws to clean off his buffing wheels. And he'd probably paint the damned thing red anyway. ;-)
Wow! Thats the business, well done
Hello Fumbly Measles! Thanks so much!!! This time I can't be blamed for the Red! Lol. 😃👍
Very nice !!
Hello Michael!!!! Thanks so much!!!! I'm so glad you enjoyed the video!!!!!
Beautiful job looks beautiful worth more than $2 now learn something new with the wood clamps thank you for the idea keep up with the videos great job God bless you and family
Hello Reynaldo! Thanks so much! These are great little drills!!! 😃👍
ScoutCrafter I have one but not like yours but it still works ☺ I'm thinking of doing the same thing you did 👍
Hello Reynaldo! You definitely should! Even if you don't fully restore it a good clean-up always makes them work great!!! 😃👍
Beautiful job you are a master really enjoyed thanks
Hello David! My grandmother used to say I was a "jack of all trades... master of new none!" Lol. Thanks so much!!!
I like the videos but when you make them longer with all the details in then, those are my favorites.
Thank you! This was very helpful. ❤
Wow.. that came out nice...
Hello Santiago! Thanks so much my friend!!! 😃👍
well thanks a lot.... now I need an egg beater drill! Very nice restoration and I'm looking forward to getting one myself!
These are so available! You can get a really nice one for such little money! Hold out for a nice one! Thanks!!!!!!!!!
Beautiful. Better than new.
An ugly duckling turned into a beautiful swan. I was drooling at the end of the video as the drill looked so good. Just picked up a carpenters tool chest with tools for £12 at the car boot sale. The guy that had it painted it bright pink and I bet he got some comments on site but no-one was ever going to steal it!. I am looking to restore the chest and put original vintage tools in there, my only thought is whether to keep it pink or my preferred colour of British Racing Green (I think you would call it Hunter green or dark Brunswick green). Take care and as always, a HUGE thumbs up.
Hello Tony! You know I love Hunter Green!!!! (and Red too if you didn't know) I did like the pink on Lady Penelope's Car! ;) Thanks Tony!!! And yes! I've seen all the Thunderbirds!!!
I happen to live only about 8 miles from where Gerry and Sylvia Anderson made the original series of Thunderbirds. They made it in a shed, ha ha.
That was a bargain. Great tool
Hello LJ! Yes! $2 for the drill and $40 labor! LOL Thanks very much!!!!!
Great job!
Hello Lite Roadie! Finally a tool I can paint Red and it's not my fault!!!! LOL Thanks so much!!!!!!
Lovely lovely job. I will get to that standard one. Great video keep it up
Hello Kevin!!!! There are so many of these Drills out there! I don't think anyone threw them away!!!!! LOL Thanks so much!!!!!
Loved that one!
Hello DCPorter71! Thanks so much!!! Glad you enjoyed it!!! 😃👍
That's beautiful good job.
Hello Tommy! Thanks so much!!! Only $2 for the drill and $40 labor! Lol. Thanks again Tommy!!! 😃👍
Nice job!
Thanks so much!!!!!!
Nice cordless drill
Really came out great.
Hello Anajay!!! Thanks so much!!! I'm glad you enjoyed the project!!!!
That came out VERY nice. I think I have an old hand drill to at least try to clean up. No idea how fully I can restore it but it'll be fun to try. Thanks for the shoutout by the way!
Alan! With all those goodies you got today you will be busy for quite a while!!!! I hope you restore that little anvil soon!! That is sweet!!!! Thanks!!!!!
ScoutCrafter I think all I'm going to do with the anvil is wire brush it like a madman and flatten the deck out with the sander. I like keeping patina on my anvils, but I don't care for patina on literally anything else.
Alan! I like a shiny top and patina on the sides of the anvil! LOL
ScoutCrafter That would be my turn-of-the century Peter Wright. If I had prize posessions they'd be that anvil and the .45 I got from my uncle the last time I saw him alive.
Very nicely done.
Hello Aaron!! Thanks so much!!!! 😃👍
Nothing like the old egg beaters for small drill bits..The hand feel thats missing on electric drills leads to the snapping of fine drill bits...For any small work it's a must have.
Oh wow great stuff
Hello Eric! Thanks so much!!! 😃👍
This is so funny I just whatched this video last night and today I went to my local flea market and found the exact same drill. So I had to buy it ajdnnow it is in pieces being restored. Your videos are awesome keep it up!
That is awesome!!!!!! These clean up really nice!!! Be careful not to mangle the Knurling!!!! LOL Thanks so much!!!!!!!!
ScoutCrafter you mean the nurling connecting the big gear to the main shaft?? Because I did mess it up and it slips now
Man I've seen some pretty things but that's gorgeous! Wish it was in my collection. Good job man!
Hello Mason!!! They take some time to restore because of the parts but in the end it is a very satisfying project! I'm so glad you enjoyed the project!!! Thanks so much!!!
Awesome video. I have the exact same one and needed a video on how to restore mine back to New condition
These were always fun to fool with and just a classic vintage tool! Thanks!!!!!!
Best $2 you ever spent. Looks great with the original stain.
Hello East Texas!! Thanks so much!!!!! $2 for the drill and $40 labor! LOL
How much would it sell for now that it's reborn? I have one in the basement. Just curious, it was grandpa's and I'd never sell it.
It's funny but I never sell anything... I've given a lot of stuff away, especially to Scouts, but I just always felt strange about selling! I don't know why! =)
I have this exact hand drill that I have used for years. Where it excels is drilling small holes in plastic components in automobiles and motorcycles (e.g. 1/16" dia. drain holes in plastic head lamp covers that have had water leak into them). A delicate touch is sometimes needed and the hand drill can often be gotten into places that a corded/battery pistol drill won't.
You've made me feel bad though...to save face I guess I'll have to clean mine up and repaint it. Sometimes you just have to keep up with the Joneses and the ScoutCrafters.
Hello Aceroadholder!!! Not at all!!! As long as the drill is not rusty and oiled so it doesn't squeak, you are golden!!! I love tools that are "Used" all the time and are worn but not rusty! I always liked that look!!!!! Thanks so much!!!!!!!!
HAHA the restoration bug has bit yet another thanks to SC!! You my friend are not alone
As always great vids...Thanks
Beautiful man
Hello Baggins!!!! Thanks so much!!!!!!!
Nice drill. There was an egg beater drill in my garage growing up. Love the clamping trick.
Hello Jill! Everyone (Young and old) loves playing with egg beater drills!!!! =D They are just too cool!!! Lol Thanks so much!!!!!
Those and yankee drills. Made my mom really mad. She really liked that cabinet. Oops. 🤦🏻♀️
LOL =D
great save on the handle, really makes it nice to me, leave a countersink in it, then it will get used
Hello Jusb! You know I restored the countersink and sharpened it but it's a single flute arrangement and they work best in power applications, I would like a nice multi-flute bit for this hand drill!!! Thanks so much!!! 😃👍
yes you do get tools with things thrown together, i think my stanley hand drill had a brace screwdriver bit shoved in it! who knows who thought that would work!
LOL You would have to be superman!!! =D
GREAT JOB AGAIN
Hello ikm64- Thanks so much! I was shocked the handle came out so nice!!! 😃👍
I am old enough to remember using one of these, I can't remember the last time I've seen one though, I still have a bit & brace, I like to use when I get the chance.
beautiful!