Thanks for your help. I didn’t understand why my pool equipment was running out of cycle and didn’t know the quick on/off solution before I saw your video. I’m much obliged.
Have the Aqualink RS system with the 4 button spa side switch. The spa/pool light does not engage/work when I hit the spa side button switch but it works from the remote in manual service mode comes on no problem. I replaced the spa side switch thinking button was bad but still the same the light does not come one when using the spa side switch. What do you recommend?
I know this is old and not sure if you're still answering questions, but trying to get pointed in the right direction. I just bought a house that has all this equipment. Heater, chiller, lights, so on. But I don't have access to the account. I found the wifi reset portion, but will this process give me access to link the equipment to my account? It's all working, but I can't control it. If possible without wiping everything already configured if possible.
Love your videos! I have this system in backyard, but it is acting weird, the filter button is not working at all which is the one that runs the motor, anyways to troubleshoot the actual buttons?
I have a Jandy AquaLink RS circa 2004 controlling my pool and spa (assuming its a RS8...I have video available). Over the weekend, stopped working...no power to the AquaLink. Checked all the breakers, and they appear to be good to go. Appreciate any advice. I have a video I can send via email or text.
There should be a remote of some type in the house. If not wall mounted a hand held device. Call your RE agent and see if they can contact the Seller agent to find out where the remote is. They are rather expensive if you need to purchase a new one.
You can do it online. You have to get the IAqualink App, create and account, and add your pool to it. You have to set the schedule using the web feature within the app. Once you click Web go to Menu - Setup - Schedule.
I have the same unit. Pool service telling me that my panel needs to be replaced. Everything works on it except the solar which has a valve to regulate temperature. Any ideas or work around? Thanks!
My aqualink was installed in 1999 and its sorta losing its marbles. It turned to the spa mode randomly and turned on the spa heater at 9:00 at night. It hasn't done this since we reset it so I think I should give it a second chance before replacing it.
HappyJigg Funny. I find myself reseting the older ones pretty often. A good reset and the thing usually will start to work normal again. Upgrading is not cheap. Just finished filming the PoolCleaner 4X with its nice new box. Will have it up early next week.
My AquaLink indoor panel reads "Solar Sensor Shorted" only. So we don't see the normal Pool temp. etc. Reads it when pump (filter) is on or off. Goes away when Spa heater is on. We Don't have Solar with the pool. Any idea how to get it back to normal? Thanks.
I have a poolcomp. The freezestat has stopped working. Is this mechanical or a problem with the controller? I've been running the pump all day and night till I find a repair guy.
I have this panel I think I have a bad relay the pump will not turn off in service mode . If I hit it it will turn off . Is replacing a relay something a homeowner can do or should I get a professional ?
Not very complicated. If you take the cover off you will see all the relays. You can even swap out one that is not used and see if that is the issue. Just a couple of wires.
Trying to reset the time my pool pump is running , indoor control panel tells me , there are already 6 of them programmed , how do I get them off them and have only one setting left , I have set the time running from 1:00 pm to 10:00 pm , good it does that ...but when I get get up in the morning about 7:00 am ...my pump is running !!!! ....how do I get rid of the previous set up run times ????
***** It is best to call Jandy while you are standing in front of your system and they will walk you through deleting multiple programs over the phone: 800-822-7933
i have a problem with this panel. it wont turn the pump on automatically. i have to reset the panel breaker,then the pump comes on by itself. i alredy changed the breakers and the relay but the the problem continues. what could be the problem?
did your version come with a remote, their are ways to program the filter to turn on and off using it. otherwise it has to be programmed with dip switches on the mainboard which is a pain in the butt. If not, it could be that your board is broken and needs to be replaced but I'd check with a tech because the board itself costs between $500-$1000 depending on which version you need to purchase. best of luck!
What does it mean when it says Cell Reversing. I’ve cleaned the cell and filter. Can’t get it to turn on the Salt Cell and I have it on 70%. I also have 5200ppm of salt in my pool.
Typically the cell reverses a few times every hour to prevent scaling. But it shouldn't be a continuous thing - that would be a system error - may be too much salt.
you have way to much salt in your pool. should be around 2800-3600ppm this is the most reasonable explanation for your problem. you will need to dump a substantial amount of water out of your pool, probably 2-3 feet of water level measured from your deepend then refill with hose water until you get the ppm down to those levels.
So I am having to turn on everything manually after every cycle. I shut off breakers and turn back on and it will run for its cycle fine. Then after it shuts down at some point three lights come on and it gets stuck there until I reset it again. The lights that are lit when it gets stuck are the service light, auto light and spa mode light. If you try pushing any buttons it does nothing. I have to shut off and turn on the breakers then it goes on again. Help 😮.
Thanks for your help. I didn’t understand why my pool equipment was running out of cycle and didn’t know the quick on/off solution before I saw your video. I’m much obliged.
Did the glue on the stripes did not seep to the other side? Cause mine did
Have the Aqualink RS system with the 4 button spa side switch. The spa/pool light does not engage/work when I hit the spa side button switch but it works from the remote in manual service mode comes on no problem. I replaced the spa side switch thinking button was bad but still the same the light does not come one when using the spa side switch. What do you recommend?
That is pretty strange. I recommend a call into Jandy tech support (now Fluidra). Maybe they have a suggestion or can isolate the
cause. 800-822-7933
I know this is old and not sure if you're still answering questions, but trying to get pointed in the right direction. I just bought a house that has all this equipment. Heater, chiller, lights, so on. But I don't have access to the account. I found the wifi reset portion, but will this process give me access to link the equipment to my account? It's all working, but I can't control it. If possible without wiping everything already configured if possible.
Call Jandy Tech support monday. They can ID the account with the panel serial number and help you gain access. tel:1-800-822-7933
Love your videos! I have this system in backyard, but it is acting weird, the filter button is not working at all which is the one that runs the motor, anyways to troubleshoot the actual buttons?
When you turn on heater in spa mode does that turn on spa heater also
Yes. In spa mode the heater switches automatically to the heat setting you set for the spa.
I have a Aqualink RS4 that keeps erasing schedule and changing dates. Should I do this ?
Strange. I would call Jandy and see
I have a Jandy AquaLink RS circa 2004 controlling my pool and spa (assuming its a RS8...I have video available). Over the weekend, stopped working...no power to the AquaLink. Checked all the breakers, and they appear to be good to go. Appreciate any advice. I have a video I can send via email or text.
It sounds like a GFI may have tripped. The breaker may show it is fine but check the GFI on the side of the panel.
How do you set the timer for this unit, when I bought my house with this pool the homeowners previously never mentioned that
There should be a remote of some type in the house. If not wall mounted a hand held device. Call your RE agent and see if they can contact the Seller agent to find out where the remote is. They are rather expensive if you need to purchase a new one.
You can do it online. You have to get the IAqualink App, create and account, and add your pool to it. You have to set the schedule using the web feature within the app. Once you click Web go to Menu - Setup - Schedule.
@@wyomble This can be done without the older models? Also I'm not able to find my Device number. where can I locat that?
I have the Rs4 what do I need to upgrade so I can manage equipment online and manage a vs pump? Thanks as always
They sell a wifi upgrade kit. Then you can get the app and control everything. www.jandy.com/en/products/controls/aqualink-upgrade-and-conversion-kits
How do you program schedules ?
From the controller in the house.
Is there any way to have water circulation to the pool and spa at the same time? Pool mode & spa mode only run separately.
Not unless the spa has it's own separate equipment. So in most cases either or is the only option.
I have the same unit. Pool service telling me that my panel needs to be replaced. Everything works on it except the solar which has a valve to regulate temperature. Any ideas or work around? Thanks!
I would call Jandy to see if they have a fix besides replacing the whole panel.
Hi
I have issue of jandy 1400. The system wont run.. the error code is 170. Please help
My aqualink was installed in 1999 and its sorta losing its marbles. It turned to the spa mode randomly and turned on the spa heater at 9:00 at night. It hasn't done this since we reset it so I think I should give it a second chance before replacing it.
HappyJigg Funny. I find myself reseting the older ones pretty often. A good reset and the thing usually will start to work normal again. Upgrading is not cheap.
Just finished filming the PoolCleaner 4X with its nice new box. Will have it up early next week.
My AquaLink indoor panel reads "Solar Sensor Shorted" only. So we don't see the normal Pool temp. etc. Reads it when pump (filter) is on or off. Goes away when Spa heater is on. We Don't have Solar with the pool. Any idea how to get it back to normal? Thanks.
Pretty strange problem. I would call Jandy Monday when you are at the panel and they can probably figure out a fix - 800-822-7933
How can I set for overflow from raining? It's heavy raining here. Im so worried about it
You can't set it to drain water. Look for a hos spigot on top of your pool pump. Or you may need a Sump pump: th-cam.com/video/2q_EUW5lbS0/w-d-xo.html
is there a model # for this box and panal
It can be found in the device menu.
All of the lights on my panel are lit on and panel just froze on me. Any suggestions?
Reset breaker. Sorry - this ended up in the "held for review" section. Not sure why.
My aqualink2.0 will connect to my wifi, but it will not let me add my pool system after I got a new router. Any thoughts?
I believe if you call Jandy on Monday they an ping the system. I've had them do it for me before .
Thank you! I will follow up with how it goes@@SPL
what is the 9volt battery for?
To keep the programming/time in the event of an extended power outage.
@@SPL Thank You for responding
this control panel is compatible whit pentair heater?
Yes it is.
I have a poolcomp. The freezestat has stopped working. Is this mechanical or a problem with the controller? I've been running the pump all day and night till I find a repair guy.
sobewisdom Not sure as I have never had that happen. You can call Jandy and see if they have a service guy locally in your area 800-822-7933
I have this panel I think I have a bad relay the pump will not turn off in service mode . If I hit it it will turn off .
Is replacing a relay something a homeowner can do or should I get a professional ?
Not very complicated. If you take the cover off you will see all the relays. You can even swap out one that is not used and see if that is the issue. Just a couple of wires.
Swimming Pool Tips, Reviews & How To -MrDgvb1 do you have any videos for relay changing ? If not would be a good video.
How can I get the PDA to go from waiting? I can place Into service mode and it will connect. Soon as I go to auto it goes back to waiting
Sounds like some kind of error. If you call Jandy Tech support they can go through the process of resetting it.
Question. When my pump comes on the heater comes on as well. What should i do?
It shouldn't do that. Might be a problem with the automated system. Just turn the gas off to the heater until you can trouble shoot it.
@@SPL Thank you
If I switch my control panel from intellitouch to Aqualink PS8, will my Pentair heater be compatable?
Yes, it will connect without issue.
Trying to reset the time my pool pump is running , indoor control panel tells me , there are already 6 of them programmed , how do I get them off them and have only one setting left , I have set the time running from 1:00 pm to 10:00 pm , good it does that ...but when I get get up in the morning about 7:00 am ...my pump is running !!!! ....how do I get rid of the previous set up run times ????
***** It is best to call Jandy while you are standing in front of your system and they will walk you through deleting multiple programs over the phone: 800-822-7933
Swimming Pool Tips, Reviews & How To -MrDgvb1 Thank you very much , I will do so .
i have a problem with this panel. it wont turn the pump on automatically. i have to reset the panel breaker,then the pump comes on by itself. i alredy changed the breakers and the relay but the the problem continues. what could be the problem?
did your version come with a remote, their are ways to program the filter to turn on and off using it. otherwise it has to be programmed with dip switches on the mainboard which is a pain in the butt.
If not, it could be that your board is broken and needs to be replaced but I'd check with a tech because the board itself costs between $500-$1000 depending on which version you need to purchase.
best of luck!
I want to upgrade to iq20, jandy says i need to replace pda chip and rs chip .
Yes, they sell an upgrade kit.
My pool lights keep changing colors no matter how many times I select one color from the app. What can i do?
I would give Jandy a call.
My heater won't turn on
What does it mean when it says Cell Reversing. I’ve cleaned the cell and filter. Can’t get it to turn on the Salt Cell and I have it on 70%. I also have 5200ppm of salt in my pool.
I’m using a Jandy aqua pure 1400
Typically the cell reverses a few times every hour to prevent scaling. But it shouldn't be a continuous thing - that would be a system error - may be too much salt.
you have way to much salt in your pool. should be around 2800-3600ppm this is the most reasonable explanation for your problem. you will need to dump a substantial amount of water out of your pool, probably 2-3 feet of water level measured from your deepend then refill with hose water until you get the ppm down to those levels.
Good I need to Lear all
I love you!
I have this big Money pit in my back yard....and nobody even uses it.
So I am having to turn on everything manually after every cycle. I shut off breakers and turn back on and it will run for its cycle fine. Then after it shuts down at some point three lights come on and it gets stuck there until I reset it again. The lights that are lit when it gets stuck are the service light, auto light and spa mode light. If you try pushing any buttons it does nothing. I have to shut off and turn on the breakers then it goes on again. Help 😮.