Woodturning a Natural Edge 14 Inch bowl of unknown wood
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- In this video I will wood turn a natural edge 14 inch bowl, I don’t know what wood it is but I think it might be Elm, the blank have a moisture content of around 12 %, so I expect a little warping after I finish the bowl.
Sponsor:
www.traedrejerb...
Sponserede Items from www.traedrejerbutikken.dk
TDB Silverline series tools used in video
www.traedrejer...
Hampshire Sheen products used in video
www.traedrejer...
Titebond products used in video
www.traedrejer...
If you wish to support my channel please follow the link below
paypal.me/Supp...
The videos are for entertainment only. Woodturning is dangerous. Always seek professional advice and training before using the Lathe or any power tools. If you have any uncertainty before performing any woodturning procedure, stop and learn a safer method. Do not attempt any technique simply because you saw it in one of my videos, I might be doing them wrong! - บันเทิง
What a wonderful piece.
Thank you very much, and thank you for watching I really appreciate it .. stay safe and have a great day :-)
Beautiful big bowl! Good luck to you!
Thank you very much 😀 and thank you for watching .. have a great day and stay safe 😀
Thanks for sharing and explaining as you are turning.
Hi Jon, Thank you very much for watching I really appreciate it, have a great day and stay safe 😀😀
That's a beautiful big piece, I like it!
Hi Leo, Thank you very much I really appreciate you comment .. Have a great weekend and stay safe .. 😀😀
Nice job. Looks like it may be persimmon.
Maby it is, thanks .. and thank you very much for watching i appreciate it .. have a great day and stay safe
Very nice. Like these large pieces.
Hi Doug, Yes me too, but I need a bigger lathe 😬😬 thank you very much for watching I really apprciate it, have a great weekend and stay safe 😀😀😀 //Kim
great piece! love it!
Thanks :-) and thank you for watching I really appreciate it, have a great weekend and stay safe 😀
Very impressive bowl, top job. I have the same model of lathe and have struggled turning large pieces due to wobbling.
Hi Dave, I had a friend veld a fremme on the legs of 0.5x5 cm flat Iron and on top of that I placed a playwood plate and 180 kilo of tiels, that have done amazing things for the lathes stability.. Thank you for watching.. Have a great day and stay safe 😀😀
@@WOODTURNINGBYBRANDSTRUP thanks for passing that info on. 180 kilo's would definitely do the trick. I filled the legs with kiln dried sand but that's only about 15 kilo's so I think I will do something similar to you. Thanks again for replying.
@@ThingStuffWood if you send me a mail on by.brandstrup@gmail.com I can send you a picture of what I done ..
Forgot one thing i did remove the rubber feet from the legs .. made a lot of difference to the wobble effect too ..
Well nice piece mate
Thank you Barry, and thank you very much for watching .. Have a great day and stay safe
That is one big bowl...gonna hold a lot of Cheerios 🤣...stay safe...press on 😎 Joe
Hi Joe, alot of cheerios LOL, Thank you for watching .. have a great day and stay safe 😀😀
Hello Brandstrup. Nice job, nice. Is that you on the guitar? Best regards.
Hi John, Thank you very much for watching .. i wish that was me on the guitar.. but it is from the TH-cam music library :-) Have a great day and stay safe 😀😀
Lovely piece! Also good to see this function of the coronet lathe in use as I am thinking of buying one as an upgrade - very useful thanks 👍 also I wondered which chuck/chucks you use?
Hi Paully, Thank you for watching .. I use Supernova2 Chucks and the jaws i used here is the 130 mm, the coronet is my first lathe and i can only say i have been very happy with it .. only thing is the weight, i added 180 kilo on the legstand and that made a very big difference .. Have a great day and stay safe 😀
@@WOODTURNINGBYBRANDSTRUP hey thanks for your help, I still think this is the lathe for me as I’m very restricted on space - thanks again!
Have you secured the lathe legs to the floor with bolts?
Nope no bolts, i mand a shelf and have 180 kilo on it on my leg stand .. and then i removed the rubber feet that comes with the lathe .. .. thank you for watching, have a great day and stay safe 😀😀
1" = 2.56cm 😁
50cm er Ca. 20"😉
Ser godt ud Kim👍👍
Tak :-) så du det store klistermærke bag værktøjet .. :-) God weekend vi ses 😀