FIXED!! Fuel trim high p0172 p0175 plus a bonus!

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • Customer brought this truck with check engine light on and code P0172 and P0175 field trim bank one and two high after doing a smoke test found no leaks check the spark plugs and mass airflow sensor corrected the issue resetting alcohol level in fuel since this truck. I also did a bonus for crank sensor circuit problem found in the wiring harness as a plus Hope you enjoy the video make sure you like and subscribe

ความคิดเห็น • 16

  • @soundtoyss
    @soundtoyss 6 หลายเดือนก่อน +2

    Thank you bro I just want to say you hit the nail on the head have a GMC sierra 5.3. I change all kinds of parts already oxygen sensors, mass airflow, spark plug the entire evap system and thanks to your video. All I needed to do was just reset my long-term field trim and also few alcohol content. Thank you very much.

  • @ranaautogarage
    @ranaautogarage 3 ปีที่แล้ว +3

    ALL SET BRO nice informative video

  • @lauracoykendall9616
    @lauracoykendall9616 หลายเดือนก่อน

    Been trying to find the source of p0172 code, both o2 sensors replaced, smoke tested no vacuum leaks and new spark plugs. I have an MAP sensor, could it be going bad?

  • @702couch
    @702couch 2 ปีที่แล้ว +4

    So, in short, if you don't have an expensive/professional scanner you can't fix it...
    Should just lead with that so I don't waste 10 minutes of my life.

    • @elitemobileautoelectric7782
      @elitemobileautoelectric7782  2 ปีที่แล้ว +2

      Technically you don’t need an expensive scan too to be able to do this type of job. Even one that’s worth at least $150 would get you Data pid’s and special functions so that way you can read the data/codes. A scan tool is only to guide to see what’s going on and then you would have to take the time and try read the data and then move fwd to fix it. Trust me it won’t do you any good having a 10k scan tool and not knowing what your doing. Here I’m explaining on how to read the alcohol content and also the 02 sensors and fuel trims. Which you can do with any basic scan tool.

    • @jessejames96
      @jessejames96 2 ปีที่แล้ว +1

      Kleenex anyone? 😆😘

    • @elitemobileautoelectric7782
      @elitemobileautoelectric7782  2 ปีที่แล้ว +1

      @@jessejames96 😂😂😂😂😭😭

    • @stevegivelas9769
      @stevegivelas9769 ปีที่แล้ว

      @@elitemobileautoelectric7782
      But resetting alcohol content you need expensive scan tool

    • @paulgray6856
      @paulgray6856 ปีที่แล้ว

      I have a cheap code reader. This video basically says the MAF sensor could be bad with those codes. I got the same codes and replaced the sensor and air filters and codes gone.

  • @delongeness1460
    @delongeness1460 หลายเดือนก่อน

    Where are u located

    • @elitemobileautoelectric7782
      @elitemobileautoelectric7782  หลายเดือนก่อน

      @@delongeness1460 phx. Near 55th Ave and Thomas rd

    • @delongeness1460
      @delongeness1460 หลายเดือนก่อน

      @@elitemobileautoelectric7782 oh man sorry I’m in New York

    • @delongeness1460
      @delongeness1460 หลายเดือนก่อน

      @@elitemobileautoelectric7782 I’m having the same code and the I did reset the fuel alcohol content and I’m having the same code,also hard start in the morning and when I’m driving it stutters I replace the fuel pump also

    • @elitemobileautoelectric7782
      @elitemobileautoelectric7782  หลายเดือนก่อน

      @@delongeness1460 My guess is to check the mass air flow, fuel trims and go from there.

  • @marlowdiesel
    @marlowdiesel ปีที่แล้ว

    um um um