This was so awesome man blew me away to see how much work you put into it.... this is by far one of the best builds on the internet..... and that cone shaped grater sander trick tho...👍🏽 Next Level Bro.....
Second one of his videos I have seen. Reminds me of primitive technology and the Japanese " Sharpest ..... knife in the world" vids. Not a word spoken and not needed! Bloody awesome and using metric 👍👍
Love it. I can see myself making one. Tired of knocking my paint cans off the shelf. They always seem to land right on the nozzle which breaks off or sprays paint everywhere.
What a ripper idea mate, heading out to the shed to have a crack. Bloody hot here at the moment so might have to line a few with some foam to keep my stubbies cold as like the idea of a coldie at the end of the job. Well done,
They need something like a Nobel Peace Prize for the people that diy video. This guy would definitely win cause this just goes above and beyond with how artistic it is. (Ah man this is the opportunity to get the slow clap going) 👏🏼👏🏼👏🏼👏🏼
I like the improved design! Think I may need to try it myself. Oh the over-spray on the table saw and the cold drink on the band saw table!!!!! I cried just a little. :^(
я ролик до конца досмотрел и понравился последний момент с крышкой от бутылки, а всё остальное только если на мастерскую для моляра подойдёт это вешь, и всё же лайк вам.
Hmm...nifty idea. Although...I wonder if you flip the one tower over if it would stagger the slots. If it does, I would probably go that route if I were to make one.
Probably superior to my overflowing box inside the side garage door, and the plastic lid container on the shelf in the garage, and the couple in the one shed.... I'll take four please.
Ingenious my friend, you deserved that glass of (whatever it was) after that project. I wonder how many other people have installed such a drinks, spray can, bottle openers in there workshop after seeing you make yours? My guess is quite a few.
The spray can holder is ok. That custom beer bottle cap collector is AWESOME!
Thanks bro 😘
Keine Musik, kein Gelaber, kein unnötiges in die Länge ziehen... Ganz zauberhaft. Abonniert.
The beer in the holder sold me! Plus the bottle cap into the cup... You sir, are a genius!
It's cool man! 😎
This was so awesome man blew me away to see how much work you put into it.... this is by far one of the best builds on the internet..... and that cone shaped grater sander trick tho...👍🏽 Next Level Bro.....
Добрый вечер! Отличная идея и воплощение. А концовка ролика, просто СУПЕР! 😁👍✌️
С уважением и пожеланием успехов из России,
Александр Логинов
Very nice design.
I love your beer opening style !!!
Absolutely perfect the Beer toast at the end was brilliant very well done!!!!!!!!!! Your "FAN" in Arizona:)
Second one of his videos I have seen. Reminds me of primitive technology and the Japanese " Sharpest ..... knife in the world" vids. Not a word spoken and not needed! Bloody awesome and using metric 👍👍
Уважаю людей которые изобретают, работают руками, красавчик!
ide idenya sungguh menakjubkan bisa menghasilkan hasil yang kreatif..🥰
Really awesome! Must build something like that. Revolving is such a great idea. I can’t belive I haven’t thought about it.
Тот момент,когда занимаешься любимым делом)мастер,молодец👍
Fantastic job great workmanship love the idea and organization .it looks like a piece. Of modern Art Deco. Love it !!!! Love it, love it!!!!!
An Artist in the true sense of the word. Very, very clever. Cheers from Michael. Australia.
Great design holds a lot of spray cans in such a small space you can see what you have and It spins for easy access
Man I am just blown away by your skill. I really enjoyed watching this video. Couldn't even take my eyes off for a second. Absolutely superb👍🏽🙌
Love it. I can see myself making one. Tired of knocking my paint cans off the shelf. They always seem to land right on the nozzle which breaks off or sprays paint everywhere.
Neat.
Nothing like admiring a finished job.
And you did it in style 🍺
very good dexterity, awesome idea and fantastic ways of making all the details!
THANK YOU...for sharing. Watched and very much enjoyed. I like it! Fantastic idea.
What a ripper idea mate, heading out to the shed to have a crack. Bloody hot here at the moment so might have to line a few with some foam to keep my stubbies cold as like the idea of a coldie at the end of the job. Well done,
Приёмник крышек от пива - отличная идея!!! :)
👍пивная открывалка с откатом пробки ТОЧКА ВСЕГО ПРОЦЕССА👍👍👍
Glad I'm not the only one who likes to make gizmos. I made something similar out of toilet paper tubes for pens and pencils.
Very nice. I need this to clear my bench but I’m a fabricator so will use steel for the brackets. I might even go taller. Thanks.
They need something like a Nobel Peace Prize for the people that diy video. This guy would definitely win cause this just goes above and beyond with how artistic it is. (Ah man this is the opportunity to get the slow clap going) 👏🏼👏🏼👏🏼👏🏼
I like the improved design! Think I may need to try it myself. Oh the over-spray on the table saw and the cold drink on the band saw table!!!!! I cried just a little. :^(
Rad, and I'm all about the moxy you portray. Keep it up, you're a very creative inventor.
This may-well be THE most useful video on the Internet.
Great idea great job!!!
cool ...
I'm always amazed by your creative ideas ...
Totally agree with the end of the video ^^ Really well done, thanks for sharing!
Great work again! I love your style, and no damn music, thank you.
So this is how Bradley Cooper relaxes ! Great vid 😆
The whole video was great but the bottle cap rolling down to the bucket was awesome
Thank you. I have shelves full of different types of spray cans and am always knocking them on to the garage floor. Genius.
я ролик до конца досмотрел и понравился последний момент с крышкой от бутылки, а всё остальное только если на мастерскую для моляра подойдёт это вешь, и всё же лайк вам.
Absolutely fantastic brother
Круто!Особенно с пивной крышечкой!
excelente trabajo y excelente diseño,congratulation!! from Argentina
Now that is something we all can use in our shop or garage, and thanks for sharing your thoughts and video
It's quasi perfect, but with bigger pipe for the "special paint" you could put a ice pack to keep it cold.
I love your work
you are incredible , very talented
I hope that is warm beer. If it's cold the ring on the table will be difficult to remove.... Else, VERY WELL DONE!!!!!
Love the happy ending! Haha
Excellent build! Very original.
Good video⭐⭐⭐⭐⭐
Mein Highlight ist die Käsereibe. Sehr geniale Projekte auf Deinem Kanal!
Nicely done, buddy!
To think this slipped under my radar until just yesterday.
Have a like for the video, as well!
;)
C’est vraiment une très belle réalisation... quand on a pas une multitude de bombe en tout genre 👍😉
That's a really good idea.
The cone grater sander for bevelling is a good idea.
Potentially modify the top/end with a bit to go into cordless drill for hands free.
Neal I.A Kerr til his wife finds out!
The very end of this video shows your high skills!!!!! Amazing....definitively amazing! !!!
Great job, an excellent way to store your cans, or even a bottle of beer or two 👍😉
Lol the beer bottle opener is king!
I think i'll make one just for beers ahah!! 😂 Brillant Idea mate!
Very cool. Made me laugh at the end. So clever
Hmm...nifty idea. Although...I wonder if you flip the one tower over if it would stagger the slots. If it does, I would probably go that route if I were to make one.
Excelente trabajo, saludos desde el norte argentino.
Simply put. That is Genius. Kudos. 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
I enjoyed watching it especialy the last scene. Great idea and making!
I used old Computer hard drive magnets under mu bottle opener to catch the bottle tops. Worked a dream :-)
Fantastic job, may have to borrow this space saving/convience idea
What a day... What an end... What a nice idea! 😍
Excellent imagination...Great Idea! Thumbs Up!
Perfectionism is the highest level!
P.S. PEACE to All!!
Einwandfrei. Proschd. Gruss aus California.
Красава. Еще и с юмором. Хорош.
I really like the beer Part! Awesome work!
これ、一番欲しいかも・・・・
機能性とデザイン、両方兼ね備えていて、最高です！
こういう製品あるんですかね？あったら、欲しいです。
The popcap stuff...over 9000!
Very good work, it's just perfect
Dude, that bottle cap ramp into the bucket has the thinking. Could. Make one straight down like a plinko game.
I've made a plinko game with bottlecaps for a friend's bday, it's really easy and fun to make
Waht a greate design. Cool projct,
Tahanks for showing
Sascha
Probably superior to my overflowing box inside the side garage door, and the plastic lid container on the shelf in the garage, and the couple in the one shed....
I'll take four please.
Cool build!!!!👍👍👍👍👍
Love your work 👍👍👍👍
Super good job !👏👏👏👍🏽
It's perfect work. A great idea bravoooo
Ingenious my friend, you deserved that glass of (whatever it was) after that project. I wonder how many other people have installed such a drinks, spray can, bottle openers in there workshop after seeing you make yours? My guess is quite a few.
Simply and you are a genius excuse me for my poor english✌️
Nice workmanship
Very creative. Any ideas for a fllap disc, grind disc, dispenser?
Cool! Especially about beer opener ))))
How amazing taking rest after good work. Awesome meeen ♥️♥️
Awesome job man 👍🏻
Nice build!Better finish
За открывалку отдельный ,,👍,,
Awesome design
Фаскоснимательная магия)))
Чувак ты такой же крутой как я ,только значительно круче!!
First video I've seen and loved it
Well deserved that drink.. kudos to you Sir.. 👍
Excellent, brillant 😁👍🏻
amazing! Respect from Russia!
yeah, voll cool Du trinkst ein Herry (Herrenhäuser) das kommt aus meiner Heimatstadt Hannover. Allein deswegen schon ein sehr sehr gutes Video!!!
vielen lieben Dank und ein lieben Gruß aus Hannover
Damn man! Nice work flow you managed to film there!
...the beer top going in the trash can was just Showing Off!!
Eine großartige Idee sehr innovativ 👍👍👍👍👍TOP
Ich hab mir 3 videos angeschaut. Du brauchst echt mehr Zuschauer. Hammer nice. Mach bitte weitere Videos
The bottle opener is the best part.
So much overkill for a spray can rack.....
IT'S PERFECT!!!!
Bravo, bellissimo e conclusione da applausi. CV 🇮🇹