Once again dude, you give me the exact information I'm looking for when it comes to a product. Simply needed to know if Channel 5 could be used without the gyro as an adjustment knob, and you delivered. Thank you!
I bought one of these a few weeks ago for one of my budget builds. And i actually ended up using in my c1 hardbody its been so awesome just make sure to keep the manual there is alot i got the one that controls all lights without using up channels, it works awesome on my winch, and a dig unit. I love it
I spotted this on flash deal at Banggood and had to have it, as i just got a new cross rc NT4 that comes with 4 channel Dumbo, so will use this in the cross Unimog
Hello, thank you for reviewing this product, I’m new to Rc hobby, I received my 1/16 hypergo h16bm 12 days ago and I’ve noticed some lag while I drive it. So I was wondering if you could please tell me if this transmitter works for that model. Thank you so much, btw I subscribed to your channel 😊
Hello, im hoping you can help me with this transmitter. Ok so i turn it on and the on button continues to blink along with three beeps with Tone that goes from high to low every few seconds. I have new batteries in it. It has bonded with the receiver. Oh and when I turn it on the red light between ch3 and ch4 stays on for a couple seconds. Please help me. The receiver is the x6dc w/out gyro.
Does Anyone Know If It Can Be Configured For Automatic 4 Wheel Steering? Where The Steering Wheel Controls Both Axles At The Same Time? I Know You Can Use Channel 5 Knob To Do Independently Contoling The Rear Axle But Im Hoping To Do Automatic 4 Wheel Steering.
What about the 3-in-1 receiver was bad for crawling? I'm guessing it didn't modulate well? I'm thinking of getting something like this so I can hook up an ESS on a FCX24 Smasher
They have several other receivers. You can run any of them. Just prefer the micro for these 1/24s cause it takes up less room. The built in esc isn’t good for crawling so you won’t want to run it but you can bypass the esc like I did in the video and just use the receiver portion if you’d like.
Yeah usually to do that you need one of these controllers. Plug the lights into it and then into the channel you’re using. Then it’ll let you turn them off/on. Same with all of my transmitters. amzn.to/43G9sxa
@@lukewaggoner5533 yes it’s been great! I only have it connected to a few trucks so it’s not always the transmitter I’m using but it’s got a good amount of use and been great.
Hello, im new to the hobby. Im wondering why the qd10 receiver you mentioned was not good for crawling, and what does make a receiver good for crawling? Any help is appreciated, thanks for the video.
It’s an all in one esc/receiver and the esc just isn’t good at low speed crawling. Not real smooth. So I prefer to go with a better esc and one of the other receivers.
You can adjust the trim and end points on all channels besides ch5 which is the dial and it can basically be set at whatever by the amount you turn the dial. So when running the rear steer on yhe ch5 dial you’ll just scoll it back to center every time you use it.
How has this setup been working so far? I just got mine in and im having an odd twitch with the steering sometimes. Sometimes going from one direction to the other itll spaz out, but go to the correct direction and distance turned. The distance from the setup doest seem to matter. I was curious if youve had this issue?
@2fmrc thank you for the reply, I'm going to move it to a few different places on my truck and see if maybe there was some interference from the motor maybe. I'll also try the other receivers I get with it.
Haha! Dang! I thought I liked my higher end stuff. I mean it is $40 and does what a lot of $200 radios do. Guess you’re not a fan of the cheaper stuff?
I didn't realize toy grade items came with multiple custom options and tons of customization. I'll have to find something different for my weaponized remote control tanks I guess 🤷♂️
Yeah it looks kinda basic but I haven’t looked into it. Are there micro receivers for it? I’m kinda fed up with Flysky changing their receivers every time they release a new transmitter. I have about 75 Flysky receivers across about 4 different transmitters & none will work with one another. It’s aggravating when you wanna upgrade transmitters but have as many RCs as I have and have to replace all of those receivers lol
@@2fmrc it’s compatible with about 12 flysky receivers. Including 2 esc/receiver combos. I’ve watched other reviews on this item, don’t know if I’m 100% sold on it. Highly considering going all in and buying the Furitek avatar. But shipping to down under is pricey. 😬 That’s why I value your honesty/opinion when it comes to RC products I know what I’m getting into, cheers for getting back to me 🍺
@@liambell7883 I definitely would take this over the avatar. I had major issues with mine after 2 uses. But maybe it was just bad luck. It’s way overpriced imo though.
@@2fmrc the dumboRC or the flysky? I want something small an compact for my scx24 so it fits in my lunch bag with my lunch, currently I have the Spektrum DX3 and it’s pretty bulky I reckon an the nightmare I just had with it I’m just not interested with it at this point. I’ll dust it off maybe when I break into 1/10th scale
@@liambell7883 I’d take the DumboRC or a Flysky gt5 over the avatar for sure. The gt5 isn’t a small transmitter but it has a great feel to it. The dumbo is just hard to beat for the price.
I bought one of these from Amazon, and it immediately had a low battery warning beep every 5 seconds or so while turned on. Requested a replacement from Amazon, which worked for one afternoon then began the low battery beep. Is anyone else having this issue?
@@2fmrc Maybe there was a bad batch of them that ended up at the Amazon distribution center where I live. Everyone seems to be trouble free, and I really like how it works. Bummer I can't get a good one!
That is awesome i loke the form factor alot and ive always liked dumborc controllers there a great budget controller imo. Thanks for sharing matt. Not sure if ya seen i emailed ya back and just wanna say thank you and i appreciate ya
Amazon has them for 30 bucks right now with the other micro receiver. Im going to slap it in my micro b with a brushless swap. Where are the micro b videos by the way?
Hey Matt, you ever get a chance to play with the Flysky FS-MG7? It has rear steer but not separately controllable. It works like the Avatar system and also on a budget. The Shop - Mini RC has a great review on it if you haven't checked it out! th-cam.com/video/DIHFjo9-9QU/w-d-xo.html. I think it even works with the big flystuff receivers as well and comes apart for easy storage. Thanks for the review on this one as well! Glad to see some good budget transmitters coming out!
Yeah it’s pretty basic and I hate rear steer on a selectable switch. I’m also pretty tired of Flysky releasing new transmitters and none of their old receivers working with them. I have probably 75 Flysky receivers across 4 different transmitters. None will work with each other and none will work with any new releases they come out with. Maybe the mg7 would work with some of them (don’t think it does) but I’m not willing to chance it lol. So basically every time I want to upgrade I have to replace every receiver or keep the old transmitters. I basically run the Radiolink rc8x in everything now but this dumbo will work with their old receivers for anyone who has their older stuff. That’s the one place Flysky drops the ball and it’s a big issue for me. Enough to make me switch brands when I used to really love them.
@@daylightdies7194 I appreciate that. I didn’t think it was either. I mean… I have a daughter who was born in China and a son who was born in Korea. I’m not the least bit racist or meant to be offensive. I’m just more old school and don’t try to read into everything people say.
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
I’ve been rockin DumboRC remotes for a couple years now and they are an awesome budget remote 🤘🏼
Once again dude, you give me the exact information I'm looking for when it comes to a product. Simply needed to know if Channel 5 could be used without the gyro as an adjustment knob, and you delivered. Thank you!
Awesome! Glad to hear you got what ya needed out of it
Ordered this for my scx24, can’t hate on dumbo they’re just rest good value
My 6 year old has one. We bound it to his lc racing model and this little radio is amazing. It has incredible range.
I just clicked on this out of curiosity and every time i had a question about something you answered it seconds
Awesome! Glad it hopefully helped some. Thanks for checking out the vid!
I bought one of these a few weeks ago for one of my budget builds. And i actually ended up using in my c1 hardbody its been so awesome just make sure to keep the manual there is alot i got the one that controls all lights without using up channels, it works awesome on my winch, and a dig unit. I love it
Maybe I missed it in the video, but what type of connector does the micro receiver use?
That orange power wagon looking sweet, Yep I was here watching
I having trouble to setting the 4ws on my clod buster. Can you help me?
Can you post the manual somewhere? I can’t find one online.
I spotted this on flash deal at Banggood and had to have it, as i just got a new cross rc NT4 that comes with 4 channel Dumbo, so will use this in the cross Unimog
Hello, thank you for reviewing this product, I’m new to Rc hobby, I received my 1/16 hypergo h16bm 12 days ago and I’ve noticed some lag while I drive it. So I was wondering if you could please tell me if this transmitter works for that model. Thank you so much, btw I subscribed to your channel 😊
Hello, im hoping you can help me with this transmitter. Ok so i turn it on and the on button continues to blink along with three beeps with Tone that goes from high to low every few seconds. I have new batteries in it. It has bonded with the receiver. Oh and when I turn it on the red light between ch3 and ch4 stays on for a couple seconds. Please help me. The receiver is the x6dc w/out gyro.
I just ordered one. I'll find a use for it. I like my small controllers.
pretty sure you can switch the steering wheel to the left side as well
Nice! Haven’t checked that out!
Does Anyone Know If It Can Be Configured For Automatic 4 Wheel Steering? Where The Steering Wheel Controls Both Axles At The Same Time? I Know You Can Use Channel 5 Knob To Do Independently Contoling The Rear Axle But Im Hoping To Do Automatic 4 Wheel Steering.
Nice and honest review, thank you.
Is it possible to bind several receivers to this transmitter?
Edit: oh sorry you answered that 😅
What about the 3-in-1 receiver was bad for crawling? I'm guessing it didn't modulate well? I'm thinking of getting something like this so I can hook up an ESS on a FCX24 Smasher
Yeah the modulation is terrible on it.
I like my Smashers stock transmitter, looks so similar to this one too. I ordered this for 2995 I'm modifying due to that reason alone lol.
Is the micro receiver waterproof?
Great video!! Are these waterproof?
So you have to get the mini receiver to run the crawler, or can you just get the 3in1 receiver?
They have several other receivers. You can run any of them. Just prefer the micro for these 1/24s cause it takes up less room. The built in esc isn’t good for crawling so you won’t want to run it but you can bypass the esc like I did in the video and just use the receiver portion if you’d like.
@@2fmrc thanks man
I have a different dumborc controller and I love em as well but I can not get mine to turn my lights off an on. Did you have the same issue?
Yeah usually to do that you need one of these controllers. Plug the lights into it and then into the channel you’re using. Then it’ll let you turn them off/on. Same with all of my transmitters.
amzn.to/43G9sxa
@@2fmrc guess I’m gonna have to give it one more shot lol I got a few different kinds and couldn’t get it to work but I’m gonna try that one
@@2fmrc thanks 🤙🏼🤘🏼 much appreciated homie
Can you run a winch with this?
Yeah you could
Definitely I run it with winch and a dig it had alot of options it's awesome
@@nate4024 awesome, I have a mini winch for my trx4m but my Furitek remote doesn't have a switch for winch. I will have to look into this guy
Has this transmitter continued to perform well over the past year since posting this video?
@@lukewaggoner5533 yes it’s been great! I only have it connected to a few trucks so it’s not always the transmitter I’m using but it’s got a good amount of use and been great.
Is it good as a dumborc X6 big one and is it can paired with x6fg receiver?
Would this combo work with a brushless motor for a Mini B? debating on getting one if itll work with the spektrum 6000kv brushless motor.
Awesome Transmitter !!!
Hello, im new to the hobby. Im wondering why the qd10 receiver you mentioned was not good for crawling, and what does make a receiver good for crawling? Any help is appreciated, thanks for the video.
It’s an all in one esc/receiver and the esc just isn’t good at low speed crawling. Not real smooth. So I prefer to go with a better esc and one of the other receivers.
Can you adjust the trim or limits of the rear steer?
You can adjust the trim and end points on all channels besides ch5 which is the dial and it can basically be set at whatever by the amount you turn the dial. So when running the rear steer on yhe ch5 dial you’ll just scoll it back to center every time you use it.
Thanks that was so helpful 👍
You hav a video for the rear wheel steer knob?
How has this setup been working so far? I just got mine in and im having an odd twitch with the steering sometimes. Sometimes going from one direction to the other itll spaz out, but go to the correct direction and distance turned. The distance from the setup doest seem to matter. I was curious if youve had this issue?
No mine has been great so far. I run it in several of the small scale trucks and one in a 1/10 truck. Haven’t had any issues so far.
@2fmrc thank you for the reply, I'm going to move it to a few different places on my truck and see if maybe there was some interference from the motor maybe. I'll also try the other receivers I get with it.
Will it work with x6dc reciever without gyro?
i have a little xrx dpa mini drifter im wonder if i could hook this up to it?
Toy grade. Im sure there are dumbo radiolovers out there. Just my thoughts on it. Probably great WLT WL TOYS trucks and such.
Haha! Dang! I thought I liked my higher end stuff. I mean it is $40 and does what a lot of $200 radios do. Guess you’re not a fan of the cheaper stuff?
Good to know. I bought it to run my toy trucks, not a Navy drone.
I didn't realize toy grade items came with multiple custom options and tons of customization.
I'll have to find something different for my weaponized remote control tanks I guess 🤷♂️
Have you seen the flysky FS-MG7?
Yeah it looks kinda basic but I haven’t looked into it. Are there micro receivers for it? I’m kinda fed up with Flysky changing their receivers every time they release a new transmitter. I have about 75 Flysky receivers across about 4 different transmitters & none will work with one another. It’s aggravating when you wanna upgrade transmitters but have as many RCs as I have and have to replace all of those receivers lol
@@2fmrc it’s compatible with about 12 flysky receivers. Including 2 esc/receiver combos.
I’ve watched other reviews on this item, don’t know if I’m 100% sold on it.
Highly considering going all in and buying the Furitek avatar. But shipping to down under is pricey. 😬
That’s why I value your honesty/opinion when it comes to RC products I know what I’m getting into, cheers for getting back to me 🍺
@@liambell7883 I definitely would take this over the avatar. I had major issues with mine after 2 uses. But maybe it was just bad luck. It’s way overpriced imo though.
@@2fmrc the dumboRC or the flysky? I want something small an compact for my scx24 so it fits in my lunch bag with my lunch, currently I have the Spektrum DX3 and it’s pretty bulky I reckon an the nightmare I just had with it I’m just not interested with it at this point. I’ll dust it off maybe when I break into 1/10th scale
@@liambell7883 I’d take the DumboRC or a Flysky gt5 over the avatar for sure. The gt5 isn’t a small transmitter but it has a great feel to it. The dumbo is just hard to beat for the price.
I bought one of these from Amazon, and it immediately had a low battery warning beep every 5 seconds or so while turned on. Requested a replacement from Amazon, which worked for one afternoon then began the low battery beep. Is anyone else having this issue?
Wow that stinks! I haven’t had any issues with this one yet 🤞
@@2fmrc Maybe there was a bad batch of them that ended up at the Amazon distribution center where I live. Everyone seems to be trouble free, and I really like how it works. Bummer I can't get a good one!
I found out the battery voltage was a little too high. Once the battery wore down a little, the beeping stopped!
What receiver do you use for the gt5?
www.ebay.com/itm/224471092093?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vktv0ea_Q4e&sssrc=2349624&ssuid=i7plO3GMQpW&var=&widget_ver=artemis&media=COPY
That is awesome i loke the form factor alot and ive always liked dumborc controllers there a great budget controller imo. Thanks for sharing matt.
Not sure if ya seen i emailed ya back and just wanna say thank you and i appreciate ya
Sweet man 😎
Amazon has them for 30 bucks right now with the other micro receiver. Im going to slap it in my micro b with a brushless swap. Where are the micro b videos by the way?
@@rccr2424 I got one but it’s just meh. Haven’t really messed with it much.
How fast in ms is the dilay from this remote?
Can i use it for traxxas slash 1/10?
Yeah you definitely could!
How to reverse Ch5
Will this work with a trx4m
If you’re changing out the esc it will. The Trx4m esc & receiver is all in one so you have to swap out both to change the transmitter.
@2fmrc thanks love your videos I'm fairly new to the rc community
Hey Matt, you ever get a chance to play with the Flysky FS-MG7? It has rear steer but not separately controllable. It works like the Avatar system and also on a budget. The Shop - Mini RC has a great review on it if you haven't checked it out! th-cam.com/video/DIHFjo9-9QU/w-d-xo.html. I think it even works with the big flystuff receivers as well and comes apart for easy storage. Thanks for the review on this one as well! Glad to see some good budget transmitters coming out!
Yeah it’s pretty basic and I hate rear steer on a selectable switch. I’m also pretty tired of Flysky releasing new transmitters and none of their old receivers working with them. I have probably 75 Flysky receivers across 4 different transmitters. None will work with each other and none will work with any new releases they come out with. Maybe the mg7 would work with some of them (don’t think it does) but I’m not willing to chance it lol. So basically every time I want to upgrade I have to replace every receiver or keep the old transmitters. I basically run the Radiolink rc8x in everything now but this dumbo will work with their old receivers for anyone who has their older stuff. That’s the one place Flysky drops the ball and it’s a big issue for me. Enough to make me switch brands when I used to really love them.
I use the dumbo and the GT5. Crawlers and scale rigs etc on the gt5. Badgers on my dumbo.
This small guy is interesting!
1:24 yikes. A bit offensive to our Chinese friends who enable us to get these goodies so cheap.
Ehhh someone’s always offended about something
@@2fmrcit gave me a good laugh it’s in no way offensive what you said
@@daylightdies7194 I appreciate that. I didn’t think it was either. I mean… I have a daughter who was born in China and a son who was born in Korea. I’m not the least bit racist or meant to be offensive. I’m just more old school and don’t try to read into everything people say.