-Rf Nrf24l01+ 100mw 2.4ghz -Nodemcu Esp32 Wifi +bluetooth 4.2 Iot Wroom Esp32s Arduino -some cables Do i need anything else? its hard for me to understand this video, thank you for this content!!! sub
WOW I FINALLY FOUND SOMEONE WHO MADE A TUTORIAL ABOUT THIS! Dude can you make a wi-fi version of this too? I tried to make one but it doesn't work at all :D. But not deauther, signal jammer.
@@Engineerofeverything nice also try integrating it like one esp32 two jammer it will be cool, if you can but anyway i will wait for the video, but now you earn my subscribe. nice explore ko pa channel mo hehe. lezzz go
As Bluetooth has 79 channels and wifi 15 ! It can jam but the code is written in such a way that it shifts the channel 1-79 so fast to jam the Bluetooth and the 100mW rf module isn’t that powerful to jan the wifi !
is this suitable for ESP32 Development Board Integrated 2.44 Cm OLED Display, CH340 Driver, WiFi+BLE Wireless Module? (I think so, I'm just asking to be safe.)
Thank men for your tutorial that's very interesting, this module can disconnect for example Airpods communication with an IPhone or only speaker like in the video?
Hello I need some help I Uploaded the code on a ESP32 but it gives me errors with the EZbutton library and other issues in the code involving that library
Perfect for noisy neighbors
Haha
Range ??
aux cable 💀
@@prax-s1rRocks 💀 Brake fluid 💀 Slingshot 💀
-Rf Nrf24l01+ 100mw 2.4ghz
-Nodemcu Esp32 Wifi +bluetooth 4.2 Iot Wroom Esp32s Arduino
-some cables
Do i need anything else? its hard for me to understand this video, thank you for this content!!! sub
@@luiscarrizo8074 nrf24l01*2
Esp32 node32s *1
Few jumpers and a power source
@@Engineerofeverything so i need two nrf, one esp32 and maybe a powerbank to make it portable. Thanks! let me know if im wrong
@ absolutely right
no sabes cuanto busque esto , mil gracias !!
Stay tuned for more such content !
Excellent project, please share with me the link to the libraries. Thank you very much.
@@juandavidgiraldogiraldo2083 there is link in description
thank you bro
@@lakshmikantamalik6202 anytime
Where did you connect the capacitor?
@@aventanila VCC and GND pin of NRF module
WOW I FINALLY FOUND SOMEONE WHO MADE A TUTORIAL ABOUT THIS! Dude can you make a wi-fi version of this too? I tried to make one but it doesn't work at all :D. But not deauther, signal jammer.
I will make it once I reach 1000 subscribers and will do giveaway too
@@Engineerofeverything Briliant. Thank you.
@@Engineerofeverything This thing can already jam wifi networks! When I turned it on, I saw that my wifi was disconnected!
Da pra fazer sem o capacitor?
can i use the esp8266
yes you can use it but this tutorial is for esp32 board and i will made another video for esp8266 microcontroller when i be free
Usking bhi video bhi bana दीजिये esp8266 se Bluetooth jammer ki
wow very helpful video .thank so muchhh
my friend please tell how to use two netowrk modules please
Need to include another NE pin in code
Can the antenna be used with another one?
Yes you can use any 2.4ghz antenna
Is your coding already for dual NRF?
Just include the NE pin
It works very well! However, with only one NRF24 module, the code is not set up to run two at the same time. What do I need to do to activate both?
@@PEDRONETIC i will make separate video on it with Oled display and some switches also
Amazing esp32 video
Does it work with CC1101 module?
@@ChatdeEstudante no cc1101 is for sub ghz and if it is for 2.4ghz code need to modify
It was a very useful video. I have a project. What should I do so that the Bluetooth car does not interrupt my own signal? Can you help me?
It’s jammer, it will interrupt all the signals
@@Engineerofeverything thank you again, it's a great video
What is type esp32 he use in video?
Esp32 Node MCU S
@@Engineerofeverything Thank
@@EngineerofeverythingCan i use esp32 wrood 38pin ?
Witch capacitor do you use?
Use 10micro farad to 100
Could you make a video with the connections?
Sure
Saudações do Brasil, aguardo esse vídeo também 🎉
What antenna are you using?
Normal 2.4ghz antenna
Does it work for classic bluetooths (BR/EDR) or only for ble?@@Engineerofeverything
Works for all BT
What capacitor to use? Please ans 😔
10uF
Can different music be played on a hacked Bluetooth device in this way?
Will work on this project
@@Engineerofeverything thank you
@@Engineerofeverything do you have github code for this
@@Engineerofeverything
can I do this in kali linux using only an external wifi card without a module?
does it work on esp32-s3?
Check the SPI pins of the board and match with code it will work
SIR I NEED HELP! i connected everything right but it somehow only jams the bluetooth device in the radius of 1-3cm. Why is it so?? PLEASE ANSWER
Check the code
can you fix this?
1-3 cm? Use capacitor
@@Engineerofeverything im using a capicitor 10v 100uf but its still the same results
Rough diagram pls
noice, do you also have wifi jammer or its the same with deauth attack?
@@takki9238 i am making video of wifi jammer tonight ! No not deauth attack ! It’s a real jamming of all the channels that are busy on 2.4ghz wifi !
@@Engineerofeverything nice also try integrating it like one esp32 two jammer it will be cool, if you can but anyway i will wait for the video, but now you earn my subscribe. nice explore ko pa channel mo hehe. lezzz go
NRF24L01 use krna zaruri hai? Board m toh phle se blutooth hai na...
It’s very low powered so to jam the Bluetooth you need to send the data more powerful !
no veo las librerías esp bt y esp wi fi
will this tool Jammer Bluetooth And 2.5ghz WiFi simultaneously
As Bluetooth has 79 channels and wifi 15 ! It can jam but the code is written in such a way that it shifts the channel 1-79 so fast to jam the Bluetooth and the 100mW rf module isn’t that powerful to jan the wifi !
can it run on nrf24l01 smd?
@@UserH7zm yes it will also work !
Does it work without the capacitor
Yes it will work
@@Engineerofeverything does it gonna have some issues like being not more effective
@@Engineerofeverything doesnt work for me
It says ble jammer couldn't be started
Bro I need full wireing diagram that could not be understand please 😢
@@S.KathirVel-ub6ui there is link in the description
Amazing
Iam looking for Ble Jammers from many years now I got it 😘
have fun and will make 2.4 ghz wifi jammer as well. keep sharing video
@@youtbe6835y ok sure i will make that video when i reach 500 subscribers
@@Engineerofeverything please include brother how to increase the Range of Your Wifi jammer brother 🙏🏾
Can i use 100 uf capacitor?
@@elakdmico yeah
Hi friend, I loved the very good video, but I would like to know which capacitor you used, could you tell me please? 😅😅
10uF
Please provide cercuit diagram 😢
See the github link in the description there it is !
bro can you share all tools byuing link
taobao bro
Online
3.3v 2uf capacitor?
yes 3.3v and 10uf capacitor
My serial monitor say Ble couldn't started, plsss help me solved it
Did u solve?
@@Engineerofeverything i have the same problem
@@MikeeOkk which esp32 board are you using?
@@Engineerofeverything wroom 38pin
@@Engineerofeverything esp wroom 32 38pin
is this suitable for ESP32 Development Board Integrated 2.44 Cm OLED Display, CH340 Driver, WiFi+BLE Wireless Module? (I think so, I'm just asking to be safe.)
See the pinout of the board and if the pins are same use same code otherwise change the pin in code other be same
SCK-14
MISO-12
MOSI-13
CNS-15
CE-16
GND-GND
VCC-3.3v
IRQ-?
Please help me with this
IRQ is not connected! Just connect 7 pins
Bro please give links to where i can buy those devices and make a full video how to assemble it. ❤️😶🌫️
Aliexpress
can use esp8266 instead ?
yes but need to change the pin in the code
@@Engineerofeverythingi have ESP32 38P CP2102, can i use the same wiring diagram? Thanks!
Please send me the wiring picture🙏🙏
there is link for github in the description
Range?
10 meters almost
Can I use esp8266?
yes but this config and code are for esp32
can bro give project?
Yes
Can you share the code?
It’s on the description of the video ! There is github link
Thank men for your tutorial that's very interesting, this module can disconnect for example Airpods communication with an IPhone or only speaker like in the video?
Yes
can i use harduíno uno ?
will it still work?
Bo
No
Bhai ek error a raha hai
Compilation error: RF24.h: No such file or directory
Bhai kasa solve Kara please explain 😢
Download the library
@@Engineerofeverything how to install library please explain
Library to manage libraries
Its workingghggg wow😈😈😈
Subscribe like and share to get such content!
The thing I'm looking for the most now is a 4g-5g cellphone signal JAMMER, can you make one?@@Engineerofeverything
In my esp32 Not like the numbers only in like 18 but in my esp like d18 is this the same?@@Engineerofeverything
What will the actual range of it ??
@@rupeshkharole9567 i have tested upto 10 meters and can be increased using 0.5W nrf modules
Why my esp blinking
Did you solve it?
@Engineerofeverything no .i use esp32 wroom 38 pin
Esp32 and nrf pin connection likh do please 😢
There is github link on the description
Bhai copiciter kasa lagana hai
@AmanKumar-n1n3e 100uF
@@Engineerofeverything n1n3e kaya matlab hai
Hello I need some help I Uploaded the code on a ESP32 but it gives me errors with the EZbutton library and other issues in the code involving that library
Install the ezbutton library and it will solve your problem
@@Engineerofeverything i need esp_bt and wifi library, can i get it ?
Can you explain me in a better way how to build it?
Sure
esp32 name?
@@nokia5376 esp32 node mcu 32s
@@nokia5376 node mcu 32s
@@Engineerofeverything where u buy it from can i hv the link?
@@Engineerofeverything um dose esp32 wroom 32 work? (cp2102)
@nokia5376 yes
This code use for m5 stick
The pins defined on the code need to be changed ! Esp32 is much more cheaper than m5 stick
@@Engineerofeverything yes but i have m5stick puls2 inbuilt esp32 chipset
@rushgaming7037 we can use in m5 stick also just need to configure few things on code !
I subscribe you now
Thank you so much ✌🏻
bruhh it's work?
It will definitely work
@@Engineerofeverythingits not working for me
Well well well the code looks like from smoochiee
Huh
@@Engineerofeverything bro the code literally on your github is the same code from smochiee hspi
yes😂they owned it now...
not working
Try again
make a uploading video
@@wirelesshappiness5325 uploading video?
@@Engineerofeverything yes full process and details
I am waiting your reply
Reply for what?
I can't understand by coding please can make ful coding video ❤❤
okay sure i will make it after 10-11 days full detailed video
@@Engineerofeverything 😢😢😢 please upload ❤❤❤
good chóp
Thanks
Possible with esp8266?
Yes but need to adjust pins in code