Building NAS with a 4 bay NAS case

แชร์
ฝัง

ความคิดเห็น • 33

  • @BrianThomas
    @BrianThomas 2 ปีที่แล้ว +9

    You sit among a very rare crowd of people. Only 2 people have reviewed this case, and you're 1 of the 2 people. Fantastic job. You're doing what I'm going to do.

  • @mamdouh-Tawadros
    @mamdouh-Tawadros 4 หลายเดือนก่อน

    Hi thank you for unboxing and explaining everything. But it is expensive, if you add all other components it will be more expensive than a 4 bay NAS system with excellent configuration. Again thank you.

  • @betterwithrum
    @betterwithrum 2 ปีที่แล้ว +1

    Thank you, I was considering this case, appreciate you doing the review

  • @maksimkazlouski5959
    @maksimkazlouski5959 2 ปีที่แล้ว +2

    I think, you can be successful in doing ASMR unpacking. Feels like you can be good at it. Anyway thanks for the demo.

  • @Aesir5
    @Aesir5 2 ปีที่แล้ว +1

    Thanks for showing the case

  • @SkysTrains
    @SkysTrains ปีที่แล้ว

    thank you. ive been looking for a case like this and after your review i know which one

  • @russellparker6144
    @russellparker6144 3 วันที่ผ่านมา

    does not look like the cpu has much air flow space

  • @ronaldnaeyaert3653
    @ronaldnaeyaert3653 5 หลายเดือนก่อน

    What brand is the case. Amazon link

  • @skylogmalaysia
    @skylogmalaysia 11 หลายเดือนก่อน

    What power supply are you using? Can share the name that i can use to find in aliexpress?

  • @MiddleB0ss
    @MiddleB0ss 14 วันที่ผ่านมา

    Farting at 00:00, liked!

  • @DiyintheGhetto
    @DiyintheGhetto 2 ปีที่แล้ว

    Hello, You said it can use a ITX motherboard correct? From looking at the case I would say mini-ITX. Am I wrong? Also I was wondering are you using a pico power supply?

    • @MrRobravens
      @MrRobravens 2 ปีที่แล้ว +2

      He's saving his breath considering ITX never caught on. Most people abbreviate it to that now as you almost never see true ITX boards on the market

    • @DiyintheGhetto
      @DiyintheGhetto 2 ปีที่แล้ว +1

      @@MrRobravens true. I have saw a few but not many.

  • @be-kind00
    @be-kind00 ปีที่แล้ว

    Can someone please post a link to buy the case.

  • @MarkDaGardna
    @MarkDaGardna 2 ปีที่แล้ว

    Please, will a normal power supply fit in that case or only one similar to the one you installed?

    • @mistermcribbb1066
      @mistermcribbb1066 2 ปีที่แล้ว

      it will only firx flex atx power supplies, so only one similar to what he used

    • @tomdillan
      @tomdillan ปีที่แล้ว

      you must use a flex atx power supply, a normal power supply will not fit.

  • @az-fy3mp
    @az-fy3mp ปีที่แล้ว

    the motherboard support hot swap?

  • @luiserasmo
    @luiserasmo 2 ปีที่แล้ว

    Are you using a Pico PSU for the motherboard?

    • @czgu6398
      @czgu6398  2 ปีที่แล้ว +1

      No, I use 12V/150W external power supply, just put it inside. The external power supply is about $13 and 150W is enough.

    • @christopherwood2290
      @christopherwood2290 2 ปีที่แล้ว

      @@czgu6398 If you think a 150 watt psu is enough, a generic powerbrick at that then your are delusional. If you ran a stress test your pc would black screen at best and melt the powerbrick at worst.

    • @czgu6398
      @czgu6398  2 ปีที่แล้ว +1

      @@christopherwood2290 This is 4-bay NAS case. It's a NAS, not a gaming PC, so I don't need to run stress test.

    • @tomdillan
      @tomdillan ปีที่แล้ว +1

      yes, he is using a pico psu with external power supply that he installed inside the case. It would be better to remove the external power supply reduce internal temperatures.

  • @nyang-nyangko
    @nyang-nyangko ปีที่แล้ว

    What is the height of the CPU cooler in mm??

    • @GirlOnAQuest
      @GirlOnAQuest 11 หลายเดือนก่อน

      Max Height of cooler is LxWxH: 3.74 x 3.74 x 0.91 inches or height 23.114 mm

  • @kumz14
    @kumz14 2 ปีที่แล้ว

    what CPU and ram did you use ?

    • @czgu6398
      @czgu6398  2 ปีที่แล้ว

      Intel i7-4790 and 16GB DDR3. These are all from my old desktop.

    • @betterwithrum
      @betterwithrum 2 ปีที่แล้ว

      @@czgu6398 How is the heat disapation with the fans it comes with? What temps are you averaging?

    • @czgu6398
      @czgu6398  2 ปีที่แล้ว

      @@betterwithrum I do not heavily use it, so temperature is OK in my case. This case is NOT for regular mini ITX board. I mean it's very hard to put the mini ITX board in. But it's good for server ITX boards which has few things on back board. Also I replaced the power supply with a 500W power supply.

  • @christopherjames9843
    @christopherjames9843 2 ปีที่แล้ว

    Why the heck did you take the backplate off the motherboard?

    • @SkysTrains
      @SkysTrains ปีที่แล้ว

      it most likely wouldent have fit with it on

    • @ShaferHart
      @ShaferHart ปีที่แล้ว

      @@SkysTrains now I'm scared mine wont' either. I'm planning a new build.

  • @ChateauHomeE62
    @ChateauHomeE62 4 หลายเดือนก่อน +1

    dude quit psychologically clearing your thraught! no one want sto hear that. edit/block it out of your videos! it is not hard and is considerit of others. there is no physical reaosn you do it. you have nothing and no one to blame but yourself for it, so take responsibility for it by either seeing a psychiatrist about it, or not doing it anymore, it is actually quite easy to do so! think of how your really bas psychological throught habit bothers others!