FiiO FT3 Review - Too Good to be True?

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024

ความคิดเห็น • 37

  • @Flavius7
    @Flavius7 ปีที่แล้ว +11

    I just don't understand how FiiO can sell this for 300, it's a miracle. The quality build is fantastic and I happen to love the cups design with that stylish shuriken. I'd get a pair just for that. The feeling is great and accessories are almost high end. Too bad the pads are a bit on the small size for my ears, otherwise this model would be KING for this price bracket. The sound is clean and detailed, no disturbing or lacking frequencies. Sandu is 100% spot on when he says those work way better with a tube amp, best match ever. If you own an OTL under 500 definitely try these... REALLY LIKED THEM!👍👍

  • @emilianpredescu3477
    @emilianpredescu3477 ปีที่แล้ว +4

    I was expecting this product for a long time. About time for FiiO to release a desktop headphone. And what a beauty it turned out to be, love the carrying case! Cable is also very good quality and sound is balanced and clear, better focused then the 600 line from Sennheiser imho. Got one and couldn't be happier. Thanks, Sandu, thanks, FiiO!

  • @jeffhernandez5098
    @jeffhernandez5098 ปีที่แล้ว +1

    As a few here have said, the pads are just too small for my ears. Too uncomfortable to wear for more than about 30 minutes. With a 60mm driver, I would have expected the cups themselves to be a bit larger to accommodate larger pads. For this reason alone, I will be returning them.
    I really like the sound but I disagree that they sound the best with tubes. My primary playback system is the Musician Drago R2R ladder DAC and the Cayin HA-3A amplifier. My secondary system is the SMSL M400 DAC with a Schiit Jot2 amplifier. I also use a FiiO M11 Plus Ltd DAP.
    One the primary system they headphones sound too soft. They have no "edge" to the notes and a lot of midrange bloat. I put on the pleather pads and it improved somewhat but still not very good. Plug them into a solid state amp and they really come alive. Sounded great on the secondary system and the M11. I would definitely keep them if they were more comfortable for me.

  • @asan1050
    @asan1050 ปีที่แล้ว +3

    SoundNews!..Thanks Much!..

  • @RedFightingMood
    @RedFightingMood 2 หลายเดือนก่อน

    Very informative review, but how will it perform with a Topping Dx3 Pro+ ? Does that little muscle box have enough power to get everything right ?🥴? Loudness is one thing, but the most important factor is whether it will sound at its fullest ?🤗? I'm currently on the hunt for a headphone that will be a price/performance gem among stones and FiiO FT3 and FT5 are prime suspects among Aune AR5000 or Neumann NHD 30 !🧐! Would be nice to know where You would go in that situation, cause it sometimes gets me a headache, when so many factors have to be considered on the road to clean & natural sound !🤕!

  • @revan.3994
    @revan.3994 5 หลายเดือนก่อน

    How would these 350 Ohm compare to the 32 Ohm version in terms of sensitivity and power requirements?... especially for portable setups?

  • @Hetsu..
    @Hetsu.. 5 หลายเดือนก่อน

    Would you say this would be ok with the dx9? You said op-amps wouldnt be a good pairing, so idk

  • @Maj0rTac0
    @Maj0rTac0 3 หลายเดือนก่อน

    I got the white variant it looks great! This ca s is perfect on my tube amp from #Felixaudio the echo 2

  • @Criticalmaze
    @Criticalmaze ปีที่แล้ว +1

    You can knock someone out with these. They seem to be built to throw around 😅

  • @kawmic7
    @kawmic7 5 หลายเดือนก่อน

    What about if you use them with quad dac powered LG phones?

  • @esariasesarias3793
    @esariasesarias3793 4 หลายเดือนก่อน

    If this is a silver award what would be gold award?

  • @jackfein8914
    @jackfein8914 ปีที่แล้ว +1

    I use fiio K7 not Q. 2 watts with 32 ohm load and 560 milliwatts with 300 ohm load. Do you think thats good? Thanks

    • @Hijynx87
      @Hijynx87 ปีที่แล้ว

      Yea that’s more than enough. The k7 is a desktop unit. You can even run these on a btr7 or qudelix 5k fine.

    • @jinraigami3349
      @jinraigami3349 ปีที่แล้ว

      @@Hijynx87 Even when it is a 35Ohm headphone?

  • @cynicalprogram1665
    @cynicalprogram1665 3 หลายเดือนก่อน

    How do they work with the HiBy R6 III?

  • @olegyamleq7796
    @olegyamleq7796 ปีที่แล้ว

    Great review, thanks. FIIO make some amazing stuff. not surprised these are great!!!!

  • @Hijynx87
    @Hijynx87 ปีที่แล้ว

    I like how they don’t leak too much sound, but you can still hear your surroundings enough in case someone is calling for you or your phone goes off. Also this is fantastic for movies and gaming. Nice and dynamic.

  • @Hijynx87
    @Hijynx87 ปีที่แล้ว

    I hope I made the right choice, it was this or a hole in my wallet for a 109 pro. I just purchased the penon 10th anniversary iem, so I decided to get the fiio lol.

  • @avavaviv1
    @avavaviv1 ปีที่แล้ว

    Did you try Hiby Hiby FC4? It has good power for a dongle

  • @AhmadGhaziA
    @AhmadGhaziA ปีที่แล้ว

    You sound so quite then the music so loud. Shocked in my earbuds. 🤣🤣🤣🤣

  • @kanegforce3974
    @kanegforce3974 ปีที่แล้ว +1

    great review

  • @danadirectmarketing
    @danadirectmarketing ปีที่แล้ว +1

    Thank you... how would you compare these to the Sundara in terms of stage, etc?

    • @Hijynx87
      @Hijynx87 ปีที่แล้ว

      From what I’ve read the fiio is one of the better staged headphones out there. I don’t have a sundara, but I have an edition xs. I’m not sure how similar they are as far as staging though, but I did just get my ft3 in the mail today.

    • @labaningombam8556
      @labaningombam8556 2 หลายเดือนก่อน

      ​@@Hijynx87 hey, i know it's been a while, but how did you find the FT3 vs Edition XS?

    • @Hijynx87
      @Hijynx87 2 หลายเดือนก่อน

      @@labaningombam8556 ft3 is a good balanced headphone with a Harmon tuning (Harmon headphone tuning, not the iem dry pinna boosted midbass lacking Harmon) the xs has much more of a wow factor in the treble. I barely use either of them though, I just prefer in ears mainly for convenience sake and sound preference. The xs isn’t going to fit everyone though, if you have a small head forget it unless you mod them with dekoni nuggets or a strap.

    • @Hijynx87
      @Hijynx87 2 หลายเดือนก่อน

      @@labaningombam8556 both can be driven with a btr7 in 4.4 with boost balance mode(350mw/32ohm) just fine, but will scale with more power.

  • @deangrande7002
    @deangrande7002 ปีที่แล้ว

    thank you, great review! 👍🏻🙌🏼

  • @Hijynx87
    @Hijynx87 ปีที่แล้ว

    So I don’t have a desktop amp/dac (other than a soundblaster g6/btr7 in usb mode/qudelix 5k usb mode) for about $200 what would you recommend for this and my edition xs? Or should I be good with what I’ve got already? I was thinking fiio k7 or topping dx3 pro? Or jds hevi stack

    • @ROCKSTAR3291
      @ROCKSTAR3291 ปีที่แล้ว +1

      Fiio K7 is a solid choice, plenty of power.

    • @Anon-One
      @Anon-One ปีที่แล้ว +1

      Just use the G6.???

  • @danielfuentes8997
    @danielfuentes8997 ปีที่แล้ว

    Con un fijo m11s como suenan?

  • @Hijynx87
    @Hijynx87 ปีที่แล้ว

    I just got my pair! I didn’t try it yet but I just broke out the btr7!

    • @Hijynx87
      @Hijynx87 ปีที่แล้ว

      Works great with the btr7 in case anyone wants to know how it went. Use 4.4 and turn on boost balanced mode. 🤘🏻

  • @kozulich
    @kozulich ปีที่แล้ว

    Do these work well with the FIIO R7?

    • @Hijynx87
      @Hijynx87 ปีที่แล้ว

      I’d imagine it would be a good pairing. They work on the btr7 just fine with a lot of headroom.

  • @BigBoss-kk8hq
    @BigBoss-kk8hq ปีที่แล้ว

    How do they pair with tubes?