Hey, got the Klokhouse Noseless 5.3 and am going to install the same pad. I find the board too narrow for the pad and wanna cut it tighter.. Will that work, and should I cut the middle part, or the sides (inside or outside) - what do you reckon will work thr best?
Hi Kjeld, we usually stick the pad in the grab rail, so there is no cutting needed. But if you want to cut, yes, cut the middle part, that will look the nicest. just cut off 1cm strip either side to keep the center holes in the middle. use a steel ruler and a sharp new stanley blade.
Hey, got the Klokhouse Noseless 5.3 and am going to install the same pad. I find the board too narrow for the pad and wanna cut it tighter.. Will that work, and should I cut the middle part, or the sides (inside or outside) - what do you reckon will work thr best?
Hi Kjeld, we usually stick the pad in the grab rail, so there is no cutting needed. But if you want to cut, yes, cut the middle part, that will look the nicest. just cut off 1cm strip either side to keep the center holes in the middle. use a steel ruler and a sharp new stanley blade.
Many thanks. I ended up cutting the middle part thinner. Sits and looks perfect now! :)
Now you tell me. Your 5 weeks late Wieger, 😀 Kucky that I managed the job without help.
We knew you didn't need any help ;-).