This looks fantastic! Might have to get the family back in Germany to send some over. I did have a concern that the treatment might rub off if you touch it. Does it need to be or can it be sealed? My main concern is my leather couch that will be touching that wall.
Looks nice. But if this effect is needed in new build, with prices of this material and labor costs, it is cheaper just to build entire wall out of cast concrete from the start of the building process
Looks good but Ive never seen interior concrete walls that are pitted and rough like that. All the precast tilt up concrete walls here are hard troweled with a very smooth finish. Do you have a product that does not have the grainy sand in it but just a cement/marble flour or metakaolin as its filler in order to do a very smooth finish coat?
Might this be what you're looking for: th-cam.com/video/wyHN0wz_cNI/w-d-xo.html Same product, but applied differently. If you're looking for something with cement/marble flour, then Sentimento 78 is the product of choice. It can absolutely be troweled harder resulting in a smoother finish.
No, it is not. You can apply Creativ Hydro Impregnating Agent 81 after the regular application steps: www.brillux.com/exposed-concrete-look, however this will only provide protection against short-term impact of water. This creative application technique is not suited for bathrooms or the exterior, for example.
Hi Shannon, I'm afraid that as the supplier we cannot recommend an application in a shower area. There might be ways to get this done, but none that we would feel comfortable with.
We do not have permanent branches or regular international shipments to Australia. You would please have to contact our export department to discuss if shipments to Australia are possible in your case: export@brillux.com / +49 251 7188-229. Thanks!
Hi there, what do you mean by "safe"? The wall won't come crashing down on you, and since the material is mineral-based it will only support a great climate in the room, preventing mold build-up. Hope this helps? The application is no cake-walk, though. You should always hire an experienced professional, unless you're a professional yourself.
Hey, thanks for your interest in Brillux products! Unfortunately, we don't have any stores set up in Canada. For inquiries about shipments from Germany to North America, please contact export@brillux.com / +49 251 7188-229.
Exposed concrete is such an underrated look. Personally, I love the brutalist feel you get with exposed concrete walls.
This looks fantastic! Might have to get the family back in Germany to send some over. I did have a concern that the treatment might rub off if you touch it. Does it need to be or can it be sealed? My main concern is my leather couch that will be touching that wall.
Looks nice. But if this effect is needed in new build, with prices of this material and labor costs, it is cheaper just to build entire wall out of cast concrete from the start of the building process
obviously you do this past that choice.
NorbertasJ Obviously you’ve never built concrete wall forms 🤔
the mix is just cement I loved how it turned out
Any training courses in uk
I’m honestly just looking at this cause it would look good in my future office lol
That's fine. Please keep us in mind for when that day finally comes. ;-)
Looks good but Ive never seen interior concrete walls that are pitted and rough like that. All the precast tilt up concrete walls here are hard troweled with a very smooth finish.
Do you have a product that does not have the grainy sand in it but just a cement/marble flour or metakaolin as its filler in order to do a very smooth finish coat?
Might this be what you're looking for: th-cam.com/video/wyHN0wz_cNI/w-d-xo.html Same product, but applied differently. If you're looking for something with cement/marble flour, then Sentimento 78 is the product of choice. It can absolutely be troweled harder resulting in a smoother finish.
@@BrilluxInternational thank you, that is what I'm looking for
Glad we could help!
Where I can purchase this in USA?
Looks great.
could this be used over a wooden floor
No, this product is for wall application only.
Hi, Nice video. Is this surface waterproof?
No, it is not. You can apply Creativ Hydro Impregnating Agent 81 after the regular application steps: www.brillux.com/exposed-concrete-look, however this will only provide protection against short-term impact of water. This creative application technique is not suited for bathrooms or the exterior, for example.
Can you get this in a waterproof finish for a bathroom shower area?
Hi Shannon,
I'm afraid that as the supplier we cannot recommend an application in a shower area. There might be ways to get this done, but none that we would feel comfortable with.
My walls are painted a red color right now. What primer should I be using to prepare for concrete/plaster?
Is your product available here in Australia?
We do not have permanent branches or regular international shipments to Australia. You would please have to contact our export department to discuss if shipments to Australia are possible in your case: export@brillux.com / +49 251 7188-229. Thanks!
What type of tape did you use? What I've found so far has too much adhesive or breaks.
You mean the contouring tape? That's Tesaflex contouring tape which you can find on our German website: www.brillux.de/produkte/11284/.
Thanks for you
Is it safe?
Hi there, what do you mean by "safe"? The wall won't come crashing down on you, and since the material is mineral-based it will only support a great climate in the room, preventing mold build-up. Hope this helps?
The application is no cake-walk, though. You should always hire an experienced professional, unless you're a professional yourself.
I mean healthwise. I saw some plasters have a lot of warnings and I would like to make sure its not carcinogenic or unhealthy.
nuvi01 Healthwise you‘re safe. As stated before the mineral-based product supports a healthy indoor climate and prevents mold build-up.
Hold
my beer.
Where can you source this product in Canada?
Hey, thanks for your interest in Brillux products! Unfortunately, we don't have any stores set up in Canada. For inquiries about shipments from Germany to North America, please contact export@brillux.com / +49 251 7188-229.
Where can I purchase in the US?
Please contact our export department: export@brillux.com / +49 251 7188-229. Thanks!
Me a gustado muchísimo pero no entiendo el ingles 😢
unfortunately that's not available here in Mars
This looks more like dirty plaster than concrete
Not sure what dirty plaster would look like since we don't offer anything of that sort.
I don't think you know the meaning of exposed concrete! Why did you google this heading anyway!
ৃ৷ ল