For anyone curious and unable to find a clear answer: There isn't a clear max span for a 2x6 header. The guaranteed max span in the absolutely worst case scenario for a header constructed of 2 2x6 on any 1 or 2 story single family residence is 2 feet 5 inches. There is no standard prescription for a header constructed of 3 2x6, so you might think "oh, 3 2x6 is definitely stronger, so I can span more". Although you are likely correct, an inspector may come back and say "it aint in the book, so either an engineer needs to stamp it as good enough or you need to upsize the header". This is part of the reason why I tend to use 2x8 or larger headers, because there are prescriptions for 3 2x8 ranging from spans as low as 3ft9in to 6ft3in depending on the circumstances.
As I bought a few headers just last night I was wondering if I was able ... per strength to build mine owe. Wish I seen this video 1st thanks for the share
I used to frame openings for a large company and on some buildings we would nail 2 of the 3 2xwhatever they may be, put a 1 inch foam and the other 2x on the backside of the foam! These were usually exterior load bearing walls with approved stamped plans! The filler is not part of the span rating and we used to use 7/16 osb for filler, because it almost always fit perfectly in the 5 1/2 wall! Perfect math in building usually means bulging out headers! We also ripped the filler a bit smaller, say 5.5 header I would rip to 4.75 or 5! Makes it faster to get it built!
I used to build headers, the same exact way this guy does and there nothing wrong with that! Also another interesting fact is that lumber species are not equal! 3, 2x6 southern yellow pine #2 are a bit stronger than 3 2x6 spf #2 in the same span!
That kid is lucky to be raised in a family with a Dad that is building the family some blood equity - that's exactly where that wife and Kid need too be. Good job Dad.
O'shit.... for a family to want to be together ; I guarantee you there a level of safety that surpasses most in their family and work life ,I'm sure he understands the situation ... if you've ever used a air nailer before you'd know his family is safe
You killed it with meals
For anyone curious and unable to find a clear answer: There isn't a clear max span for a 2x6 header.
The guaranteed max span in the absolutely worst case scenario for a header constructed of 2 2x6 on any 1 or 2 story single family residence is 2 feet 5 inches.
There is no standard prescription for a header constructed of 3 2x6, so you might think "oh, 3 2x6 is definitely stronger, so I can span more".
Although you are likely correct, an inspector may come back and say "it aint in the book, so either an engineer needs to stamp it as good enough or you need to upsize the header".
This is part of the reason why I tend to use 2x8 or larger headers, because there are prescriptions for 3 2x8 ranging from spans as low as 3ft9in to 6ft3in depending on the circumstances.
Coolness
Good info for 2x6 wall, thanks
Bam! Glad we could help!
Thanks for supporting our channel! 💪
Great video. Thanks
Thank You!
As I bought a few headers just last night I was wondering if I was able ... per strength to build mine owe. Wish I seen this video 1st thanks for the share
Oh no! Next time! Thanks for the support Troy!
Where do you buy headers?
Where are you stationed?
At least the Mrs. was somewhat interested.
Why add plywood instead of chance for extra insulation? Just curious.
Headers are built for strength, not R value. Maybe i'm wrong but id rather have the strength.
@@BreakFreeHomestead Thats a correct statement for Code in Quebec, canada
I used to frame openings for a large company and on some buildings we would nail 2 of the 3 2xwhatever they may be, put a 1 inch foam and the other 2x on the backside of the foam! These were usually exterior load bearing walls with approved stamped plans! The filler is not part of the span rating and we used to use 7/16 osb for filler, because it almost always fit perfectly in the 5 1/2 wall! Perfect math in building usually means bulging out headers! We also ripped the filler a bit smaller, say 5.5 header I would rip to 4.75 or 5! Makes it faster to get it built!
I used to build headers, the same exact way this guy does and there nothing wrong with that! Also another interesting fact is that lumber species are not equal! 3, 2x6 southern yellow pine #2 are a bit stronger than 3 2x6 spf #2 in the same span!
Cool... thanks
Thanks for supporting our channel! 💪💪💪💪
👍
Thanks for supporting the channel 🤘🤘🤘
About twice as many nails as needed, not hating just Informing 👍
Thanks!, she aint going anywhere 😉
He enjoys using his gun toy.
If he framed every day, he would get tired of wasting nails and handling that gun more than needed.
Thanks for buying the nails! 🤘
You stoped explains about the wood
Thanks, good info, but shouldn't have your kid running around and the wife should also have eye protection.
👍
Lol you must not have kids 🤣🤣
@@-themercyseat 💯💯💯💯💯
That kid is lucky to be raised in a family with a Dad that is building the family some blood equity - that's exactly where that wife and Kid need too be. Good job Dad.
O'shit.... for a family to want to be together ; I guarantee you there a level of safety that surpasses most in their family and work life ,I'm sure he understands the situation ... if you've ever used a air nailer before you'd know his family is safe