Supra gets GRIP + Evo Power Prep!
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2019
- Shooting for that 500HP mark on the evo is going to take some little mods before we hop on the dyno.... and putting down 600+ with the Supra is going to take some sticky rubber!
Download the free Neighbors app today @ ring.com/ADAM - ยานยนต์และพาหนะ
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 3 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/Gvp5qBatheE/mqdefault.jpg)
![เจอประจำ ตอน พักเที่ยง [EP.32]](http://i.ytimg.com/vi/jvqk6uJoVks/mqdefault.jpg)
Pro tip, put her in dyno mode to turn off all the driver assists.
PLEASE SWITCH BACK TO BMX😀😀😀😭😭😭
Should get Tommy to shave the beard and have an LZ stache
#LZStashgang
100% agree.
That be epic
Yeah man... I hate to brake the bad news but it seems like your blinker fluid is leaking on to your wheels....
my mans a mechanic through youtube! what a bloody legend
Oh no ! Thats gonna be an expensive repair. I had a blinker fluid leak as well and it corst me 10k to fix.
Just a tip homie!!! When you're re-pinning wires to a new connector with the little grommet thing, you're supposed to push the rubber grommet up right before the stripped part of the wire. The end of the new pin with the little wrap around thing is supposed to wrap around the rubber grommet so you can push the pin with the grommet into the connector to stop any kind of corrosion with the wires!
Thanks to adam we all know his newest girlfriend are his wheels
All those white spots lol
You need to put a ring door bell on the wheel well of the evo
U know rodknock put some shit on them!!! Lmfao
nah. that shits happened to me too. idk wtf it is
Hard water on your wheels? Maybe try a clay bar like you would with the paint.
chucko83 kinda looks like coolant
I wouldnt clay on this satin finish
I used to use a paint prep solvent to get that stuff off when I used to detail
Could also go simple and try vinegar
I don't know, hard to tell from the footage, but it looks like a "clear" coat failing to me....
Potentially the grease from the failed CV boot getting cooked from the race track(brakes transferring heat to the wheel)? Weird never-the-less....
You know it's a good video when Evo is in the title 😁😁
😁
*Supra
Tomasz is the man! Anything he says is hilarious 😂
Mayhem Inc trolley giving Darlene the limmy
Thanks Boys 🤣🙌
Definitely seems like traction control took over. 4.5 0-60 doesn’t seem right for that car with that power level
Speed Culture Studios yeah like its slower than stock now. Haha
William Thao it may have been burning those new tires off or shifting way too soon like he said, but there are 4K lb Infiniti’s running 4 sec 0-6 times with 425hp. I’m making 333hp and only 280tq and ran a 4.7 0-60. I’m sure they’ll get it dialed in though!
Theodore Yoo I am sure. But with those torque numbers, that car should be sub 4 seconds 0-60 - as long as it’s getting traction!
What turbo did he switch too?
It's so sick to see Gobla on your vids after riding along with him at Seduced Drift Event. Adam, you should come to Poland and drift at Seduced or Next Level!
MNS thanks 🚀
looks like DEF fluid that trucks use. It splatters and dries on my truck or work boots just like that.
But that you can just rinse away with water.
I got the same stuff on my car while driving behind a bus, that could be it.
Can we get street s15 action its so sick!!!! I rewatched those vids so many times
Is it still registered ?
@@RBeeMedia it was never registered afaik
If the car was parked outside, those spots could be from the neighbors' sprinkler
I usually full those bushings for the driveshaft with silicon and make sure it's in center
The content is so much better when your just having fun with your friends!!
Was your evo on the lift while he was detailing the supra?? looks almost like dried up compound or polish spitting off a buffer
Splatter on the wheels looks similar to if you drive through a construction zone and there is a mix a cement water spilled on the roadway
At first i didn't think the CT vids were gonna be great but i was wrong I really love the content lately keep up the quality stuff man!
LZ, Rudnik, Grit, Ty, Tommy content is 🔥
Been running pilot super sports for a few summers and they are some amazing tires, haven't rode on p4s tires yet but I'd imagine they're an improvement. Money well spent for sure.
7:10 "jak się macie" haha nice Adam greetings from Poland
something about this dudes videos, very fun to watch
im so glad you got some mt's for the supra. I was really hoping you would.
I see you use Milwaukee tools sir. I love my Milwaukee M18 1/2 impact. Hell, I love all of them. Rock the red.
The stains are very common on anodized volks. Some people use peanut butter to get rid of the white spots. I’ve been pretty lucky using spray wax after washing my te’s and the white spots go away.
Is Adam ever going back to his house in Florida?!
I'm pretty sure it's a trap house now
It’s not his anymore
@@magiamajia3776 stop lying
Magia Majia yes it is, it hasn’t been sold, listed or given to Nicole. It’s still his house. My parents live in the same area as him.
He doesn't want to be there anymore and besides the CT videos are significantly better.
I also have those etching marks on my car. I was driving behind a bus and the exact same looking substance was getting sprayed all over my windshield and the wipers couldn't get it off. I just held down the wash lever for about 30 seconds and most of it came off. I didn't get it off the paint yet though.
That supra looking Fire 🔥
Maybe calcium spots on the wheels?? Could be high calcium water wherever you last washed it? Just a guess
Dude never cut two wires or more at once, one at a time homie saves ya on shorts, blown fuses or relays.
Exactly!
I cringed.
Probably didnt hurt anything but it's a good way to take out a sensor or even ECU
Good practice but prob good on those two.
Yea just a habit, I do auto and vintage electronic repair and I was like he's fooling us and then snip...lol
Also a good way to change you linemens pliers into wire strippers with High Voltage.
@@rhammerfist6286 my pops was a lineman maybe that's why it's instilled in me lol.
Another dope vid adam 🤘🔥💯
My Supra looking FRESH 👌🏻👌🏻
Looks like sprinklers got you and the minerals deposited in the wheels. Clay bar time!
Im guessing brake fluid . maybe being pushed out of caliper seal under hot situations
Brake fluid would destroy/ strip the paint coating even after a few hours. Happened to me after I got my wheels painted. But it could be related to brake dust or something
When you wispered i couldnt help myself but think about you making an asmr 😂😂😂
It might be some sort of polish. Once when I was trying to restore headlights and buffed with a drill with an applicator pad and it got everywhere lol and it left stains like that which needed a lot of elbow grease to remove.
Rain wAter mixed with road salt usually will leave marks like that on your wheels fenders and quarter panels as well as frame
That stuff on the wheels looks like fresh road paint mixed in water
Jak się macie was great LZ. So awesome to hear you speak Polish. Now you just have to come to Next Level 2020 to make my dreams come true
It is possible that the vibration your feeling is due to the driveline angles, common problem with vans etc if they have uneven driveline angles they will get vibration through the shafts
Spooling up makes that harness from the MAF to the IAT plug and play
Wat?
WOWWW.. i just bought ring with my fiance a day ago if knew u were a sponsor i would of used ur code.
damn
Good show
Product called “Delete” by a company called IGL coatings should take the spots off the wheels
need chaser content
It's called water spots from dirty water. I did detail at Mazda, We used acid to take it off of car paint and windows. Wheels you have to be careful. I'd recommend a wheels product for that or youd have to just scrub them good and pray lol
I have nitto NT05’s and Definitly think I feel the sidewalk flex when cornering
Always cut wires one at a time.
Woot woot love the evo
Hey Adam love you’re vids
Depending on what you break pads are made off sometimes when you get hot break dust of curtain breaks pads can actually take the clear powder off of wheels if they used a cheap powder for the clear
Use a power washer on the rims. 2000psi. Itll remove anything on the surface make sure you dry right away when wet and that wont happen
That sensor temp default is a sort of fail safe. If the sensor fails it will default so that your fueling stays somewhat accurate and the car will still run decent.
Regarding the trans shifting differently, I would look into a trans tune for example with an auto n54 XHP and alpine are good ways to cut down your shift times. A trans tune might be your best friend
@adam & Tom
It’s appears to be just hard water stains on the rims , it’s dangerous to the paint you need to get them coated or give em a clean after the rain or dry after wash .
Great video
Yo tht ring app is dope actually
Should do some heat management. The turbo, manifold is heating up the intake so much this way
I think the evo wheels clear coat is coming off but its hard to tell
I used a clay bar on my bronze Rays Nismo wheels to remove the hard water marks.
If you are using P&S Brake Buster as your wheel cleaner, that is most likely what those spots are from not risnsing it off fast enough. Thats what i get on my black Work Wheels if i leave it too long or don't though roughly rinse it off.
Stoked!
coolant spots white when it drys on anything. so if your overflow
I had some wheels do that, it turned out to be the tire shine that was used got on the wheels. That might be it
Looks like hard water spots from like a sprinkler or something. My gf's car was covered from her apartments, and after trying tons of chemicals, I finally found a specific acid that you have to dilute a bunch, and that took it right off. Found a few detailing channels that recommended it. I ordered a gallon jug (it'll literally last forever..) from O'Reillys. It's called F-30 Acid.
not sure about the M/T's but i've daily driven on the Nitto's. there is a break in and testing that you should have done to find the pressure that works best for that car. if you are getting a lot of sway they may be aired down too much
Those are called carrier bearings on the driveshaft. That looks like it could be your vibration. I was thinking it was the exhaust, though. Great choice for tires! Michelin makes the best tires. Numbers proven.
Back in ct let’s see a 1/4 mile in the Supra at the track either atco or Lebanon valley
Damn chris, He needs to do a full tear down on his car and start from scratch lol
Looks like a clear coat coming off.
Time to ceramic coat the wheels! May be a lot of Iron in the water that you washed the car with or puddle you ran through. Or if you just mounted the tires maybe some of the lube/ grease that was used to help mount the tire.
Also bought my t-shirt, ready to win that supra!!!
Maybe try some never dull aluminum polish for the wheels. Aluminum wheels will do that when harsh cleaners get on them
Looks like Diesel DEF fluid on your wheels. Adams wheel cleaner will remove it. Let it sit for a minute or 2 and scrub it off with a nice wash mitt and foam/soap water mix.
ruddy at the end XD
I had that issue with my motorcycle when i got it.. Founf out it was due to w.e. wax or compoun was used on the wheels or in my case the paint try buffing the wheels and re coat them
Looks like hard water stains, possibly acid etching from acid rain but it would be on your paint as well. Ik where I live in Florida you have to flush or change your piping every couple years due to build up of calcium and limestone from the water. Don’t know how big of an issue that is in Connecticut. Could also be chlorine stains from city water.
little confused how its not doing a 3.5 0-60 with all its power.
Traction control
TCS still being on and probably the gearing
rockn roll yes on the street
@@HelloImMiltonWaddams why should that matter tho? 2 different kind of cars...
Don Draper dude, still. Two different cars, in many ways. People buy what they want. You could buy a brand new gt350 or a used gtr to say something. People buy whatever they want 🤷🏻♂️
I always thought the evo driveshaft upgrade was going to a 1 piece, is that just an 8 and up thing? Maybe I'm mistaken.
Thank u Ring🙂 DING
Distilled white vinegar for the spots on wheels or a dedicated spot remover.
Claybar for the wheels!
Their is a product called "Shineseal" they have a bio cleaner it works really well, they also offer a sealant for metals so water beads right off when getting wet
Adam lowering the tire pressure on Mickey Thompsons will help with that sway at higher speeds
if you cleaned your wheels with certain wheel cleaner it will happen. It happened to my CCWs. looked exactly the same. I only use chemical guys diablo wheel cleaner now and I have no issues.
Looks like really hard water spots.
Definitely from someone using a grinder and sparks hitting them.. Does a goodie to windscreens too 😪
Wish you and goonzquad would go to the track together and try each other's vehicles that would be awesome...my 3 favorite TH-camrs doing a collab.
You want my iat settings for aem ?
Mine are tested true, their was a revision on a form they had found the data sheet to be incorrect compared to temp=voltage. Yours could be correct, But could compare them anyway
Try using isopropyl alcohol to get those spots off it may be like a sap and thats the only thing that ive found takes sap off paint
Cool great job nice car great job nice videos
It’s hard water spots I think Chemical guys or even Adams polishes should have something to help clean the spots off
The MAF is sometimes combined with an idle air controller which tells throttle where to be to idle good, which is why you saw throttle moving @ 9:10. i think idk shit.
Try a clay bar on the rims
So hyped on this giveaway
hey baby girl let me wisper in your ear (gotta do a bolt.check)😂😂
Sick content btw
Hope it feels better
idd say the stock one was broken, and had a signal outside the normal operating range so it defaulted to 77 as soon as it read the sensor voltage properly xD
them spots are calsum from the water with the heat of the breaks clr will will work
Anyone else wondering when he’s gonna go back to Florida? Missing the Orlando vibes
Shawnm3 he’s a snowbird, will be back when Florida isn’t unbearably hot.