Your bracket is a bit openner that what it should be ,if you open it up and close 1 side of bracket just a tiny bit with a plier then it won't be loose no more and stays in its position.
That’s too bad. I purchased mine recently. Haven’t gotten it yet but hopefully this doesn’t happen. I plan on using my onyx to fade with and this to remove bulk.
Yea man either way this clipper is a must have, great for clipper over comb,removing bulk,also the blade only opens up 2.0 mm instead of 3.5mm like a jrl anothe reason why not fading with it
I just got these for hella cheap... they just arrived at my doorstep ... i was on YT looking for vids because i tried to zero-gap with the stock blade ... its off by a 0.5 mm. I listened to you mention the level being loose and they may have made some improvement bcause mine had so slight wiggle but i tigehten it with an allen screw. not sure what size but hopefully there are internals that you can buy or parts because it seems to be addressed in new batches. Now my issue is looking for a blade cuz this alignment is off lol
guy is harsh with the lever and wonders why its moving on its own lol just put some lock tight and tighten lever and stop moving the lever so harshly like its a floating lever it got the clicks for a reason
What moving blade do you use? I tried changing the moving/cutting blade with a wahl stagger tooth and regular wahl and it didn't fit with vgr. Any recommendations or solutions?
Its a ceramic blade,but it dident just fit directly,i had to change the cam follower,what u can do is cut the 2 holes in each side of can follower with a razor wich is what doesent allow it to sit
@@rxmarlo2303 thanks for answer. Can i ask which cam follower you used when you changed it and where can i get it. I really don't like the blades it comes with and wish to change both.
@@muwahhid5079 yes i got the cam follower from “3versince” jrl style package it comes with cam/blade fits their jrl style ceramic blade but i think their website is under update rn and working,but honestly for a easy route aswell u can just order the black new madeshow blades,its gonna come with the cutter and the faper style outer and it fits directly both blades on the 003 no mod and cuts really good honestly i recomend this solution
You can order the madeshow wedge blades like the ones u see on my r77f faper style,comes with both cutter and still blade and fit directly no mod really good and will stay quiet
Yes babyliss wedge will fit,any upgrade to the blade will be a improvement the one that comes is not good,i suggest just get the madeshow wedge fade that way it will come with both the cutting blade that fits and outter blade
@@rxmarlo2303 babyliss will fit without having to do to changes to the clipper? Like its a plug and play or you gotta change stuff around ? And bro if you wouldnt mind could you send me a list of what blades will be a direct fit to this clipper ? Like the outside and moving blade without having to do no taking parts out etc ? If you dont mind it would help me alot.
@@victorortega2718 yes babyliss outside not moving blade will fit on it,any 2 hole outside still blade will fit,gamma,wahl,jrl,etc as long as it has 2 holes,for interior moving blades only ones ive gotten to fit where madeshow cutting blade without no mod thats it
@@victorortega2718 thats why i say just order the madeshow wedge fade blade from aliexpress because it will include the cutting blade aswell,i have had many people tell me the really liked the madeshow blades on this clipper after recomending
Thats right i had the screw tightened to max in the video,sucks because this would have been a great fading clipper with the ergonomics,they need to make a 2.0 version of this fixing issues and making the lever open more
Your bracket is a bit openner that what it should be ,if you open it up and close 1 side of bracket just a tiny bit with a plier then it won't be loose no more and stays in its position.
Excelente video brother 🔥🔥
Muchisimas gracias hermano
That’s too bad. I purchased mine recently. Haven’t gotten it yet but hopefully this doesn’t happen. I plan on using my onyx to fade with and this to remove bulk.
Yea man either way this clipper is a must have, great for clipper over comb,removing bulk,also the blade only opens up 2.0 mm instead of 3.5mm like a jrl anothe reason why not fading with it
I just got these for hella cheap... they just arrived at my doorstep ... i was on YT looking for vids because i tried to zero-gap with the stock blade ... its off by a 0.5 mm.
I listened to you mention the level being loose and they may have made some improvement bcause mine had so slight wiggle but i tigehten it with an allen screw. not sure what size but hopefully there are internals that you can buy or parts because it seems to be addressed in new batches. Now my issue is looking for a blade cuz this alignment is off lol
If you are not satisfied with the blades that come i recomend going ahead and ordering madeshow blades they will be a improvemwnt
@@rxmarlo2303 thanks! You cut professionally?
Turn it in to a floating lever, you'll have less play on the lever after that.
Tighten the lever a little bit bro with a hex key😊
Just tight that screw man thats it.
guy is harsh with the lever and wonders why its moving on its own lol just put some lock tight and tighten lever and stop moving the lever so harshly like its a floating lever it got the clicks for a reason
Its a tool im not something to baby around,and i am obviously moving it with intensity for the video only
What moving blade do you use?
I tried changing the moving/cutting blade with a wahl stagger tooth and regular wahl and it didn't fit with vgr. Any recommendations or solutions?
Its a ceramic blade,but it dident just fit directly,i had to change the cam follower,what u can do is cut the 2 holes in each side of can follower with a razor wich is what doesent allow it to sit
@@rxmarlo2303 thanks for answer. Can i ask which cam follower you used when you changed it and where can i get it. I really don't like the blades it comes with and wish to change both.
@@muwahhid5079 yes i got the cam follower from “3versince” jrl style package it comes with cam/blade fits their jrl style ceramic blade but i think their website is under update rn and working,but honestly for a easy route aswell u can just order the black new madeshow blades,its gonna come with the cutter and the faper style outer and it fits directly both blades on the 003 no mod and cuts really good honestly i recomend this solution
@@muwahhid5079 th-cam.com/users/shortsy2N7vTZYjyY?si=hXtc9cRcIvhwXStr
@@rxmarlo2303 thanks 👍👍 that seems like a good solution. I'll go with madeshow. Appreciate your advice!
I don’t have that issue yet. I am going to use it as my primary to see if that happens to mine.
Its the only downside i have the screw tight aswell
@@rxmarlo2303 I was going to ask that but I figured you had it tight. Damn I just ordered a new color too haha I hope it’s not all of them
@@rxmarlo2303 I read some guy said he took the lever off, put it back, and tha fixed the issue
Tx
Hi. Where can I buy a spare blade for VGR 003 on aliexpress? Thank you.
You can order the madeshow wedge blades like the ones u see on my r77f faper style,comes with both cutter and still blade and fit directly no mod really good and will stay quiet
Can this clipper become a floating lever?
Yes it can,remove the lever screw there should be a spring with a circle piece on it,turn the spring around and re assemble
mines do the same too is just the click system is not that good
Yes and it doesent open that much either only 2.5mm
@@rxmarlo2303 but the clipper is still a goat!!its beating a lot of 200$ clippers
which one do u recommend me vgr003 or vgr134
The vgr 134 is really good 20w power and has better range lever,i think its more durable and will last longer
What blades are compatible with this clipper ? Is the babyliss wedge blade a go ?
Yes babyliss wedge will fit,any upgrade to the blade will be a improvement the one that comes is not good,i suggest just get the madeshow wedge fade that way it will come with both the cutting blade that fits and outter blade
@@rxmarlo2303 babyliss will fit without having to do to changes to the clipper? Like its a plug and play or you gotta change stuff around ? And bro if you wouldnt mind could you send me a list of what blades will be a direct fit to this clipper ? Like the outside and moving blade without having to do no taking parts out etc ? If you dont mind it would help me alot.
@@victorortega2718 yes babyliss outside not moving blade will fit on it,any 2 hole outside still blade will fit,gamma,wahl,jrl,etc as long as it has 2 holes,for interior moving blades only ones ive gotten to fit where madeshow cutting blade without no mod thats it
@@victorortega2718 thats why i say just order the madeshow wedge fade blade from aliexpress because it will include the cutting blade aswell,i have had many people tell me the really liked the madeshow blades on this clipper after recomending
@@rxmarlo2303 i ordered it last night appreciate it g
YO!!! Mine does the same thing!!!
Yea sucks because this would have been the perfect clipper why did they not invest time into the lever
Tightening screw does not fix issue. It is design fault
Thats right i had the screw tightened to max in the video,sucks because this would have been a great fading clipper with the ergonomics,they need to make a 2.0 version of this fixing issues and making the lever open more
Vgr 003 superrr