Plate Type Heat Exchanger | PHE | Working of Plate Heat Exchanger | PHE in industry |
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Hello friends,
"Power plant discussion" welcome to all of you my friend to this channel, my name is chandan pathak, I have 10 years of experience in power plant operation field I have created this channel only for sharing knowledge about power plant operation and maintenance, for this I shall provide series of lecture on the various topic of power plant in which theoretical, practical and mathematical concepts are included.
Email
powerplantdiscussion@gmail.com
Website
/ @powerplantdiscussion (Company Website)
LinkedIn
/ power-plant-discussion...
#powerplantdiscussion
#phe
Thanks to all of you for connecting me.
U r my motivation i am from pakistan
Your explanation very well so thanku so much
1st time Confusion clear...
Love you from Pakistan ❤❤❤
Thank you sir bhaut hi badiya explanation Kiya,thankyou❤❤
I learn from u r video and share with my viewers
Excellent, the matter is feasible for my works up group
Very informative
Super duper sr ji 🙏
good informed video,thanks
Good video.... What is it's application in power plant?
Thanks.
Good explain sir...
Zabardast sir .....
nice topic and good explain
Informative video. Please make a video on plate heat exchanger sizing.
Plate tightening ka formula ka ek video bnayi sir or Ye corrugated plate ka angle heat transfer me kya role play krta hai is par ek video bnayi ye sir
Super explain
Excellent Masha Allah bro ❤
Sir please softener plant ke bare me kuch batao
Sir please arrange a video the topic of sacrificial anode explain it
Is it same as aluminium plate fin heat exchanger. Use in ASu. Or different?
Very 👌👌. Thnx sir.
Unitop capmany ka zld ko Hindi me explain kr dijiye, English vidio u tube par hai explanation samajh me nhi aa rha hai , thoda adavance hai
Superb❤
Good
Good job
Superb 👌
Nice👍
Very nice
👍
Good content
Please make a video on oil centrifuge.
Sure
If both fluids are water and they mix up due to leakage inside, how will we know from outside that the water is mixing inside. Through pressure difference or temperature difference
Is it possible?
Thoda sa animation ke saath batayenge to aur behtar tarike se samjh payenge sir..plz..
😊
Sir how to find plate heat exchanger capacity
Sir srcew compressor par video banaye please
Sure dear
Yes sir also about reciprocating compressor multistage.
Sir phe ka internal hole hoga ki naii haii
Internal hole ni rhta h,
Alternate plate me gasket ke design different hone se fluid different plate me flow krta h
@@PowerPlantDiscussion sir internal hole gas flow hoga ki water flow hoga ammonia plant me use hune wale p he And other refrigerant use hune wale phe me sir clear bataya sir
Piz reply sir
Generally water flow hota h, but different plant me alag ho skta h, depend krta h ki temperature kitna down krna h.
Thik haii sir OK thank u sir
Sir what is orifice???what is its function?
Hello Chandan Ji
Plated heat exchanger ko kyun nahi repair Nahi kiya ja sakta hai
11. The chimney of a steam Seneration plant Is 35m high producing a natural draught of
30m column of hot flue gases. Estimate:
() the temperature of the flue gases leaving the chimney. (1) The heat lost to flue gases if
the average temperature of the flue gases leaving the boiler in artificial draught system
160"C. The mean specific heat of flue gases is 1.05k]/kg'C (i) the chimney efficiency (V)
the amount of total heat spent in producing natural draught, (v) the temperature of flue
sases in the chimney for maximum discharge. Assume Calorific value of coal - 27300KJ/kg.
Air supplied for combustion - 20kg/kg of coal burnt, Ambient air temperature -27-C.
(12)
12. A stoker - fired water tube boiler burns coal at the rate of 4ton/Hr to generate steam of
30kg/cm" abs and 430-C at the rate of 30ton/Hr. Evaluate the boiler performance from the
following data:
() Components by proximate analysis of the coal: Ash - 12.7% by weight, Moisture - 7.9%
by weight (ii) Gross calorific value of coal - 6250kcal/kg, (ii) Components by flue gas
analysis: CO, - 12.85%, 0, -6.5%, N, -rest, (iV) Carbon present in the cinder as unburnt
combustible - 2.75%, (v) The feed water temperature - 90"C, (vi) Flue gas temperature at
economizer outlet - 1 50"C, Flue gas pressure at economizer outlet - 75SmmHg. (Vil) Air
temperature at burner inlet: 30"C DB and 22*C WB. Ignore the presence of sulphur and
13. Explain with a neat sketch the operating principle of a three-circuit nuclear power
(6+4+2) sodium sodium cooled in the primary reactor circuit? consist Why of does three nuclear steam circuits generator instead involving of liquid one?
station. Why is the heat transfer agent in the 2" circuit circulated at higher pressure than
liquid
14. Consider the primary combustion zone of a gas turbine as a well stirred reactor with a
volume of 900cm'. Kerosene (C.. H .) and stoichiometric air at 298K flow into the reactor.
which is at 10atm and 2000K. Neglect heat loss and dissociation. Take lower heating value
of the fuel as 42.5MJ/kg. Use one - step global kinetics with the parameters in the molar
reaction rate equation as A - 5x10", Activation energy, E - 30,000cal/gmol, a- 0.25, b- 1.5
and m-n-0. Find the fractional amount of fuel burned, the fuel flow rate and the residence
15. () What are the toxic organics that may exit the stack during municipal solid waste
(MSW) burning? In which form do they mainly exit? (ii) What steps should be taken for the
efficient destruction of these harmful, incomplete products of combustion? (1i) What step
should be taken to ensure good furnace operation in a large mass -burning incinerator? (iv
Apart from the mass burning, what other technologies are available for deriving energ
(1+34543)
from waste?
16. (a)What are the merits and demerits of an open system of fuel drying?
Steam is generated in a waste heat boiler at a pressure of 1. 1 8MPa by the flue gas obtaine
from the combustion of a gas having N, 60%, CO-25%, CO, -6%, H -9% in a rotary furnac
The flue gases enter the waste - heat boiler at a temperature of 652"C and leave itat 227
Calculate: (i) the mass of flue gas produced per m' of producer gas burned (ii) the mass
water evaporated in the Waste Heat Boiler (WHB) per m' of producer gas burned, (1i) t
percentage of heat recovered in the WHB. Given: Boiler efficiency - 74%, Feed hea
temperature inlet to WHB - 350K, Excess air used for combustion - 25%, C, of flue ga
1.05kJ/kg K. Enthalpy of steam at 1.18MPa - 2785kJ/kg, Calorific value of CO- 12.7MJ/
(3+9
Calorific value of H, - 10.78 MJ/m'.
(5x12 - 60 mar
Page:
Sir all the neumerical please slove one by one
All are kerala boe 2023 ka paper ka question he
th-cam.com/video/8U1nCXRGkwQ/w-d-xo.htmlsi=D22Te3g9mSqJAKQb
Plate type heat exchanger
Explain achha he lekin galat bata Rahe ho
Galat he bhai
th-cam.com/video/8U1nCXRGkwQ/w-d-xo.htmlsi=D22Te3g9mSqJAKQb
Plate type heat exchanger
Tum bata do
Very long video
Good
th-cam.com/video/8U1nCXRGkwQ/w-d-xo.htmlsi=D22Te3g9mSqJAKQb
Plate type heat exchanger