Mine had some end movement in the Z stepper and ball screw ... I fixed it with a new flanged 28x12x8 bearing on the underside ... I drilled out the ball screw end and tapped it in my lathe , refitted it and locked the bearing in place with a set screw.
A little bump to this worthy vid, for a novice beginner you have shown very well how one can horse into a carving meaning the machine handled well on so sort of basic settings , if refined then some machining would be worth another chapter meaning showing the type of cutter and and the speeds and feed for the material
@@toddpruit ok cool. The reason I ask is because they have a video of a smaller object with alot of detail in stainless steel. Id like to do larger items with detail. I dont mind going slow because I dont plan on making a lot maybe 1-2 a month but im concerned that it cant do larger items or hard items
Mine had some end movement in the Z stepper and ball screw ... I fixed it with a new flanged 28x12x8 bearing on the underside ... I drilled out the ball screw end and tapped it in my lathe , refitted it and locked the bearing in place with a set screw.
A little bump to this worthy vid, for a novice beginner you have shown very well how one can horse into a carving
meaning the machine handled well on so sort of basic settings ,
if refined then some machining would be worth another chapter
meaning showing the type of cutter and and the speeds and feed for the material
From where and how much you bought it? Which version is exactly?
So a year on how do you like it? Still happy? Have you made upgrades? I’m looking at this same machine
@@bretthays2674 it's a good machine, I'm very happy with it
Sounds like it started the cut before the spindle was up to speed. Not a good thing, specially on harder materials, super important with aluminum.
do you have a link where to buy?
Ciao volevo sapere a che velocità Max può andate
WOULD LIKE TO BRING MINE TO YOU I HAVENT FIGURED IT OUT YET
Check out this guys videos, he will walk you through the set up ..
th-cam.com/video/lBRxi6LVI6Q/w-d-xo.htmlsi=m4dlJshmq2IwnVIo
Hello i need de software configurations ,you can help me?
The machine itself not bad, but its table is not strong enough I think
What program did you use to make the g code?
I used mastercam
You can use fusion 360, bobcad, there's several options
@@toddpruit can it relief engrave steel? Do you think its possible to do and entire knife blade profile with this cnc machine?
@@KevinFlores-rc1lq i cut a profile on some 303 ss taking small cuts, and using solid carbide endmill. I think you could do it ..
@@toddpruit ok cool. The reason I ask is because they have a video of a smaller object with alot of detail in stainless steel. Id like to do larger items with detail. I dont mind going slow because I dont plan on making a lot maybe 1-2 a month but im concerned that it cant do larger items or hard items
What size machine is this and this purchase Oder number?
Thanks
the machine has a 2 ft x 4 ft table with 5 inches in Z
www.amazon.com/CNCEST-Engraver-Milling-Drilling-Bronzing/dp/B087J1YXR1?th=1
that camera is moving so fast I'm getting dizzy!
Work on your camera technique if you expect us to enjoy your video…
Thanks for the tip,, I will
@@toddpruitlol. Lots of critics on the Tube
O