tires: 33-12.5-17's tire clearance to fender front: 8 and 5/8" rear: 9 and 3/4" (roughly) 1.5" lift blocks on body 2.0" lift blocks on bed thank you...
Disclaimer: I am not an expert, I do not recommend doing this to your own vehicle, I alone is responsible for the safety of my vehicle. As far as this vehicle is concern I have nothing against nissan engineering in any manner whatsoever. thank you...
Boss good job. plan to do the same with my navi 2018 but not DIY 😊... ask ko lang if there is no rubbing if i mount 35x12.5x17 tires? i have existing less 2" suspension lift ironman... btw already subscribed to your channel ty
daghan salamat boss, normally marami na akong nakikita na 2"susp lift + 2" body lift na naka 35's or 315-70-17 kung may rubb man yan very minimal na sguro i usog lang ang front fender liner tas sa may mudguard pwde body chap sa likod ng fender liner hindi rin makita madali na nila hanapan ng paraan yan boss, thanks for watching and subscribing! hhh!
shopee boss, engineering plastic pina machine shop ko lang tapos ang bolts sa bolt center lang dito sa amin,,,less than 8k lang budget kapag DIY,,,thanks for watching sir! shp.ee/n725gap
loosen and retight air intake pipe & steering rod and removed my radiator fan shroud yan lang ginawa ko boss, but check also brake lines, shift knob and gas line baka mag leak but so far ok naman, thanks for watching!
@@jerulldulalas7100 12mmx150 (8pcs) sa body tapos 10mmx100 (6pcs) sa bed. medyo short na gamay ang sa body busa nahimong 1 1/2" ra akng na body pero sa bed 2" naa,,,i suggest pangita mas taas para sa body...or tanggala 1pc ang bolt sa body og 1pc sa bed tapos dalaha sa bolt center para sure ipakita mas taas 2" og ang traha dapat parehas, thanks for watching bai! pm me boss akong ipadala ang recebo...fbpage Manuel Jr Lustado
(I'm a DIY'er) Navara 4x2 Total lift is 4inches: 2" suspension lift plus 2" body lift. I'm not into offroading, mod is only for aesthetics and minor street flooding thanks for your comment and thanks for watching!👍✌️👊🏻❤️🇵🇭
![[Watch Party] APL 2024 ใครชนะเข้ารอบ Hydra 🆚 Flash Wolves Talon 🆚 GGLive](http://i.ytimg.com/vi/BvuSgyLy4hA/mqdefault.jpg)
Thank you sir for sharing this very informative video.
salamat din po sir Joey! pasenxa na sa video editing ko amateur pa!
Boss that's a great idea. Thank you.
you're welcome sir! thanks for watching!🦇👊🏻👍🇵🇭
tires: 33-12.5-17's
tire clearance to fender front: 8 and 5/8" rear: 9 and 3/4" (roughly)
1.5" lift blocks on body
2.0" lift blocks on bed
thank you...
Sorry I forgot to mention to lossen also the steering rod! (very important!)
Disclaimer: I am not an expert, I do not recommend doing this to your own vehicle, I alone is responsible for the safety of my vehicle. As far as this vehicle is concern I have nothing against nissan engineering in any manner whatsoever. thank you...
Boss good job. plan to do the same with my navi 2018 but not DIY 😊... ask ko lang if there is no rubbing if i mount 35x12.5x17 tires? i have existing less 2" suspension lift ironman... btw already subscribed to your channel ty
daghan salamat boss, normally marami na akong nakikita na 2"susp lift + 2" body lift na naka 35's or 315-70-17 kung may rubb man yan very minimal na sguro i usog lang ang front fender liner tas sa may mudguard pwde body chap sa likod ng fender liner hindi rin makita madali na nila hanapan ng paraan yan boss, thanks for watching and subscribing! hhh!
plano ko rin mag palit tire maybe soon last year pa kc ang 33's ko kapag mag expire nalang hhh...
Noted Boss! my fb kb gsto ko sna mkita yun pics ng navi mo nka body lift? thank you
@@vicentesalandanan5244 sa last part of this video ay may mga picture and walk around you may capture it boss,,,(my fb same name boss)
thank you boss
ka navi saan mo nabili yung bracket mo sa hood ?
shp.ee/ixzw5c4
shopee boss, hindi yan pang navara pero pwde naman ikabit, thanks for watching!
Saan ka nakabili nyan boss ksama na din ba ang bolts
shopee boss, engineering plastic pina machine shop ko lang tapos ang bolts sa bolt center lang dito sa amin,,,less than 8k lang budget kapag DIY,,,thanks for watching sir! shp.ee/n725gap
Sir tanong ko lang kung wlaka na bang ibang niluwagan maliban sa steering rod,
loosen and retight air intake pipe & steering rod and removed my radiator fan shroud yan lang ginawa ko boss, but check also brake lines, shift knob and gas line baka mag leak but so far ok naman, thanks for watching!
Sir maraming salamat po,
@@user-yk5er7cq1dpati pala ang rear bumper iadgust pataas kc sa chasi nakakabit maiiwan kapag mag body lift...
boss wla nay finish product ana boss?
pls asap thanx
please watch the video until the end may mga add kc in between just skip the adds, kompleto yan papano ko ginawa, thanks for watching!
please watch my other videos for more navara diy's daghan salamat bai! th-cam.com/video/r7si_PpZuL0/w-d-xo.htmlsi=Lha_JR9qD4B49N1E
boss unsay size sa bolt gitaod tapos unsa kataas?
@@jerulldulalas7100 12mmx150 (8pcs) sa body tapos 10mmx100 (6pcs) sa bed. medyo short na gamay ang sa body busa nahimong 1 1/2" ra akng na body pero sa bed 2" naa,,,i suggest pangita mas taas para sa body...or tanggala 1pc ang bolt sa body og 1pc sa bed tapos dalaha sa bolt center para sure ipakita mas taas 2" og ang traha dapat parehas, thanks for watching bai! pm me boss akong ipadala ang recebo...fbpage Manuel Jr Lustado
Brother don't just want fashionable do the shit lift! Body lift is not save
(I'm a DIY'er) Navara 4x2 Total lift is 4inches: 2" suspension lift plus 2" body lift. I'm not into offroading, mod is only for aesthetics and minor street flooding thanks for your comment and thanks for watching!👍✌️👊🏻❤️🇵🇭