JACCODA LE 1 10watt Diode laser review
ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2023
- This video is a diode laser review of the JACCODA LE 1 10watt Diode laser. The video shares the specs of this laser plus I will be showing you the results of engraving and cutting leather, wood and slate.
JICCODA Laser Engraver: www.amazon.com/dp/B0B8DFH38R
JICCODA Air Assist: www.amazon.com/dp/B002WR8CBS
JICCODA BUILD VIDEO:
• JICCODA LE-1 Installat...
My Amazon affiliate links. Ordering from these links help support the channel at no additional cost! Items I used in this video:
======================================================
Diode Laser Safety Glasses I use -
FreeMascot OD 6+ 190nm-490nm Wavelength: amzn.to/46i2VJR
🔥My Affiliate shop: sites.google.com/view/baronle...
Subscribe to my channel: / @baronleathercraft
COME ENJOY MY ETSY SHOP
======================================================
ETSY: www.etsy.com/shop/baronleathe...
BARON LEATHER CRAFT SOCIAL MEDIA
======================================================
FACEBOOK: / baronleathercraft
INSTAGRAM: / baronleathercraft
#leathercraft #leatherworking #craftvideos #lasercuttingmachine #aufero #xtool #atomstack #laserengraving - แนวปฏิบัติและการใช้ชีวิต
This is the best LE-1 video out there. Just got mine and was trying to figure out how to focus it. Thank you!
Thank you! Much appreciated! I also spent some time working on the focus and I figured this would be important info to share on how to zone it in. Thank you again!
@@baronleathercraft I could understand why I couldn’t get a good burn. It was because I had no idea where to focus it. I can’t wait to re-focus and burn something now!
@@TVCColin Now it should be a lot more fun. Just keep doing some test and move the focus around until you find the sweet spot that you like. Enjoy!
@@baronleathercraftThanks! Looking forward to picking up the air pump too
Thanks for the review. I'm saving my pennies!
How well or will it cut plexiglass?
I just got a small amount of acrylic in. I have to give it a try. I am sure it is fine but I will give a definite answer this week. Thank you. :)
You are Awesome, my friend..!
Just checking back to hear about the results.
@@kcg3927 It will cut 3 mm acrylic using 180 mm/min 100% power in 2 to 3 passes. I hope this helps. :)
Yes sir, thanks again!