assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier. Put the playback speed as 0.5.. :P
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Hai dear sir my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners thanks & bestregards vinodhkumar
Quite good and helpful video. however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone. Why is it happening so ?
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line . Help Please Sir
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!! Cheers.
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry. Hope that helps..!!
Mugesh Kumar Hi Friend, You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib. This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile. Have a nice day..!!
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly???? This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
please make this tutorial precisely... we can not understand, where did u mark for the point for revolve. i getting fail to revolve it... please tell this step... (begin from constraint )
You can revolve by drawing an axis sketch or selecting an axis from axis system or any other similar ways. Please understand the concept and try to implement it.
Behrang Shamsadinlo Are you unable to find the helix tool or you are use the tool? Please make the question clear and Clarify where exactly you face the issue..!!
durges kumar Pandey
It is not possible to upload all videos in Hindi. I am sorry. Please note that English is a common communication language.
dhanaraj6
Clear audio + slow clicks helped a lot. Thank you!
for hex bolt top you can use groove command itself. the power input revolve command takes more time.
the way ur going fast u will soon beat usian bolt
You can slow down the video under settings.
Needed this for school. Worked flawlesly. Thanks mate
Gud mrng sir i have seen all videos of your sheet metal class
I'm very happy for that i learned more from tht
bro i just started practicing you are my support both morally and over here! thank you for your work ! you are awesome!
You explain nicely it's just that the watermark in the middle is irritating.
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
thanks a lot bro.. i was struggling a lot without tree... even my guide dt know this... it was very usefull thank u...
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Only one suggestion, Repeat. Sometimes you just have to repeat to get things right..!!
Let me know If it didnt work..!!
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
i am a beginner and its very useful sir....thnk u
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier.
Put the playback speed as 0.5.. :P
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
Awesome vid. Speed of the instruction is fine if you're familiar with the tools used the video. Easy peasy. keep it up.
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Try these videos:
th-cam.com/video/nEoZM4HVXLE/w-d-xo.html
th-cam.com/video/1A5Z8YGgqYs/w-d-xo.html
thanks!i like it! i am a new user of CATIA!
Hai dear sir
my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners
thanks & bestregards
vinodhkumar
what is the step on 0:38 sec how can you change the full length to 6. kindly rply
it's not hard just constraint one side to 6 and everything shall become so..
Quite good and helpful video.
however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone.
Why is it happening so ?
vivek Inder you need to click on the arrow pointing downwards while using groove
Thank you sir,
I learn a lot from your videos, requested to upload few parametric modeling videos or if already uploaded pl. share it
nice tutorial..btw how did you conveniently bring up in-context menus to add constraints after 4:13...thanks in advance!
once you are on the dimension option, just right click inorder to view available sub option for instant constraining..!!
Wheres can i find the helix column manually? Without that shortcut bar
Hi Shakeel, My name is Md Rafiqul Islam. it is helpful video. Would you please upload tool design such as fixture, jig etc in catia v5
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested
At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
hey im rajashree.. will you please add a video of designing a car model with designing a single part of it as welll as allover assembly.
while constructing a reference lie for revolving. i am not able to get the reference line in the correct plane for revolving. i need some help
can you upload any complicated design which is used in industries.this video is useful
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line .
Help Please Sir
Thanks for video!!! But please be sure that user-especially beginner-should match your speed.
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
+Mohammed Shakeel i have the same probleme and i don't know how to solve
if any body know a solution.
pleaze help us
sir you are awesome at work but it goes little bit fast
if you don't feel then ignore no problem
You are awesome! Keep it up!
How did u bring helix comand in part design
It would be very helpful if you go a bit slow sir..
TH-cam offers you an option to select playback speed
Agreed
Great video but you go really really fast. Kept having to pause. Could you slow it down a bit? Thanks man! Keep the vids coming
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
thank you ! happy a nice day~
You are welcome..!!..:)
this is easy and learnable for me now thank u sensei
Why when I select the helix command the part disappears? I simple can't do this without the part. Please help me!
Hi sir...goodmorning
I have a question ?
Can we create exploded view animation in catia v5 r20...?
thank you friend, very good your video
I am a beginer.How do i create a metric 12 threaded screw?what is the pitch for the thread?
You can refer to this video:
Catia V5 Tutorial|How to Create Threaded Hex Scre…: th-cam.com/video/G1-Y4R34wwk/w-d-xo.html
Why do you use constraint everytime where as you can directly enter value
hey thank u for this video ..... can u please show the elaberated use of extrapolate option on surface work bench
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
thank you sir.
I have Q i am doing produuction engineering. Can i do job in designing after my engineering.
sir can i contact with you for more clarification regarding the assembly and part design
What is the command you have typed in for helix
i keep getting an error either boolean operation and feature definition error. someone have any idea to solve this?
What is the procedure in doing one complete desgin in Specification tree.
good video...good information
any easy way to get chamfer at edges.If any please let me know
Thanks very helpful 😊
sir can u plz explain how to design a helcal gear and worm
plz i need it for my project work so waiting for ur videos
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!!
Cheers.
CAN U HELP ME TO MAKE MODEL OF A CAR DISC BRAKE, PLEASE??
Sir please post what are the tools in the CATIA and how to download it
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
can u explain how to make ramsbottom safety valve
for a video that says for beginners, you click around way too fast
i was thinking the same thing... I have too many questions
sir wt u typed to get the chamfer ,it is not clear
can we use shaft instead of revolve?
very nice tutorials, :)
what tools you choose unclear
Amazing tutorials :D
Very fast explain. So please slowly explaine and work..... Informative video
Great video thanks!
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry.
Hope that helps..!!
Nice explain ..tq bro ..
it would be very helpful if you go a bit slow sir.
What about the profile sketch for Metric Threads
Mugesh Kumar
Hi Friend,
You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib.
This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile.
Have a nice day..!!
thanks for the tutorial ..!!
why you don't use "thread/tap"?
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly????
This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
please make this tutorial precisely... we can not understand, where did u mark for the point for revolve.
i getting fail to revolve it... please tell this step... (begin from constraint )
You can revolve by drawing an axis sketch or selecting an axis from axis system or any other similar ways. Please understand the concept and try to implement it.
it say unknown command when i put c: helix .... help
Go to Start > Mechanical Design > Wireframe and Surface Design. The helix curve definition can be selected on the spline workbench
Nice work :)
I did but its not showing split option
video from 2:00 to 2:35.
I can not do
help me with
what commend for threads
hi thanks for dis
sir how to make drill tool on catia
thanks a lot for this nice video..
kemah demo li
Master cam ka koi video bana o v9
y r u going fast sir.. please slow down
+Joel ManohaR you can change the settings of the videos to slow it down
Really Nigga?
apke piche koi lagga hai jo itna fast karte ho
Niiice i have an exam soon and im just sooooo stupid when it comes to Catia :'(
Soukaina Belasri baby you are so cute..... where are you from?
how to define Arc length in Catia
sir how to cut groov on shear
dear sir plz. upload all catia tutorial in hindi thanks
This is not for the beginners I think.. Better you say step by step in a slow manner it will really help us.
the video is not clear and you also searching which option to choose ,pls give us the clear video .
How to get Octogan
very helpful
when i put c: revolve i dont find this operation
You need to firstly go to the bottom right corner space and click inorder to activate the Hotkey Option to work..!!..Cheers
Try and try until u reach that
Helix command not found
sir actually I need ur help in one design
Thank you
How to get revolve command?????
Change your workbench to wireframe and surface design or generative shape design.
Ur going soooo fast
Behrang Shamsadinlo
Are you unable to find the helix tool or you are use the tool?
Please make the question clear and Clarify where exactly you face the issue..!!
awesome