Super Simple Fix: Ram Promaster Drivers Door Check Strap Stop Fix Repair. ProMasters Only!

Not my idea, but very clever and easy to do. I would add a little o-ring at the top of the post to keep the washer stack from falling off, or possibly glue the washers in place.

[@S.M.A.C.]

Thats pretty smart. Mine has be broken for a while and the holes are bored out from previous repairs. I will definately have to try that.

[@Bessdohome]

looks a lot better than the strap fix that most use

[@CPRebels21]

Looks like you could actually pop a rubber cap on the stopper that is too small from the factory. So I'd think it'd be more like Kip's bulbous head or Kip's bulbous glans.

[@promastersonly1419]

@@CPRebels21 I like where this is going. Kip’s Girth Increaser.

[@MyGoogleYoutube]

Dang. That's slick.
Can we get a fix for the dirt that gets stuck in the window seal and etches the glass and makes the squealing noise?

[@promastersonly1419]

@@MyGoogleTH-cam nah! You wouldnt want to fix ALL the flaws!

[@dannyhightower1]

Would be easy to 3d Print these in bulk - cost possibly 10 cents each.

[@moir32725]

Do you have anything on code P0600? It's very intermittent after I reset it but it eventually keeps coming back, I've checked wiring and don't see anything obvious.

[@promastersonly1419]

@@moir32725 briefly, its telling you that another module is having trouble communicating with the engine computer. If you get a hold of a pro level scanner, it will likely point you to the source of the trouble.

[@cch201992]

Has anyone had a issue with your promaster where the windshield washer fluid starts running when the vehicle is off and keys out? Also now my ac and heat blower doesn't work. Just started a few months ago smacking the floor near the battery would fix it from time to time but now it doesn't🤔 thanks guys🍻

[@johnwren3976]

Looked like stacked washers? Why not use thick or extra thick fender washers? 🤷‍♂️

[@promastersonly1419]

@@johnwren3976 almost anything would work.

[@greglems206]

Kip's crack-blocker 3000

[@promastersonly1419]

@@greglems206 the crack filler 3000, and the crackfiller 3000 Pro made from unicorn foreskin.

[@russellmitchell8177]

Another shameless plug.😂
Eew!
I'm thinking you could make it out of 1/2-inch uhmwpe. A hole saw to make it and a bit of filing.

[@promastersonly1419]

@@russellmitchell8177 shameless plug - I like that.

[@russellmitchell8177]

Am thinking one could install such a thing prophylactically.
Ya know, before the stopper breaks.

[@promastersonly1419]

@@russellmitchell8177 Agreed!

[@wendyschneider9751]

@@promastersonly1419 Kip's Shameless Plug! If you do not use this to name one of your products I will be very disappointed!

[@promastersonly1419]

@@wendyschneider9751 I wholly agree. I dont even care what they do, the name is so good.