TA-0367: Kaiweets KM601s and KM602 Smart Multimeter - Test
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- The new Smart and Improved Multimeters from Kaiweets.
Official store: - Kaiweets Coupon 10% for kaiweets.com : TA10
KM601s : kaiweets.com/e...
KM602 : kaiweets.com/e...
Kaiweets Compare: www.tonyplaza....
Related Items:
Volt/Current Pro LB02A go.tonyalbus.c...
DMMcheckPlus go.tonyalbus.c...
Volt/Cur FNIRSI SG003A go.tonyalbus.c...
Voltage/Current LB02G go.tonyalbus.c...
Related Videos:
Video LB02A/SG003A : • #260 Process Calibrato...
Video DMMcheckPlus : • #228 DMMCheck Plus Cal...
Video Keithley 224 : • #243 Keithley 224 Curr...
Video Advantest R6142 : • TA-0349: Advantest R61...
#Kaiweets #KM601s #KM602
Thanks for the review of both of these items, side by side like this. I was looking at both items, but wasn't exactly sure what the pros & cons of each were.
Thank you very much for posting this out there!! 👌
Thanks! Glad is was a good help!
Glad I discovered this video. Was considering the KM602, but it would seem the KM601S, with the kickstand, faster response, two fuses, milliamp and 10000 counts is a higher quality product. I've owned the HT206 for many years, but it finally succumbed to my abuse. As I don't need a clamp meter anymore, but prefer a meter than can measure DC current, the KM601S is a fantastic meter at a great value. Good presentation, sir.
Thank you!
Good to see you are back, Tony. The bench looks great! Thank you for showing us these smart meters. Regards, David
Thank you David ! Yes the Bench is slowly coming how i want it (for now) :)
Always interesting... Thanks for the video... Glad to see you again...✌
Thank you Grer!
Is there a way to calibrate this meter? rM601s but also for safety concerns don’t use this meter while charging or passthrough charging it’s dangerous.
Not sure that is possible by user maybe ask Kaiweets support. For safety on high voltages maybe buy a non smartmeter from a respectable brand
@@TonyAlbus I have two other meters a fluke and Klein tools one but I just bought this one because it looks cool with the display.
@@E85_STI Yes they do look cool indeed, and the smart actualy works..
@@TonyAlbus yes it does and I appreciate your video as it’s helpful and I ask about the calibration because the kiaweets is within tolerance but it’s out of tolerance more than my other meters. I was testing an 18650 battery and fluke was 2.402v Klein was 2.400v and Kaiweets was 2.407v. The battery was dead out of a flashlight so I was doing some testing.
Great video, OK, these things look cool. I myself have a 601, the battery version. The biggest problem is the very slow short circuit tester. By the time I hear the beep on the circuit board when I'm troubleshooting, I've got 50 new grey hairs on my head. There really are much better ones on the market. Are the 601s and 602 also so incredibly slow?
i find that they are a bit faster if you set it first yoursef to continuety test manual mode.
@@TonyAlbus Thanks, I thought that too, so that all the automatic stuff is turned off. It responds faster but still terribly slowly. I once tested a plug and a coaxial cable at home. I actually had to strip a little bit of insulation before I could finally test it; a short pulse was not enough for this measuring device. With my Unit-61E, the smallest moment of contact is enough to generate a pulse and thus a sound. That's a real shame but I think that's just because of the price.
Good to see a new video! I would not buy these meters myself, but very interesting to see your tests!
Thanks Peter!
Appreciate your videos always informative 👍.
I am wondering what the watch you are wearing is?
The setup is looking 🤟.. top shelf.
Thanks John! .. watch is a Garmin Fenix5 Plus. i have it many years from when i was still able to run marathons. now its just counting my steps walking :) good quality. it can cylcle and swim too
Hey Tony, goed om je weer terug te zien. Ik heb zelf de KM601s een tijdje geleden gekocht als een extra meter en ben er best tevreden mee. Ik heb ook nog een oudere Aneng 619A die ws uit dezelfde stal komt. Dat metertje pakte ik heel vaak en vind die ook best nauwkeurig. Nu dus ook de KM601s erbij.
Thanks Marcel, jij lekker weer begonnen, deze moest er echt uit... ja niet slecht, ik dacht altijd dat het rommel was, maar het ziet er steeds beter uit en werkt prima voor waar het voor bedoelt is.
Would like to have seen the frequency response test.
Usualy i test AC voltage with 10Hz and 10K
I thought I had a Kaiweets, but I can;t find it! Maybe I have Aneng clones.
Anyway, at a hamfest I bought a Heathkit IT-22 capacitor tester and a Fluke 8030A VOM. Both very clean and cheap enough. Do you have any experience with either? I know you covered two Flukes in the 8000 series before.
73
Hi Barry, nice finds! i don't know the Heatkit myself, i do own the little fluke 8030A have not played with it yet .. it will come on one of the Fluke friday editions.
Hello sir, I have just bought the km601s model measuring device. After I put the device on, it starts in smart mode. The probes show instantaneous resistance values as if I were measuring from a point, even though I have not touched any point, or they show values as if I were measuring AC. This situation bothered me, should I be worried??
By the way, when I touch the probes of the device to resistance - dc voltage or ac voltage, it gives correct results.
Hi, good question. that is normal.. open probe will go to resistance, as open is just as high resistance. when you touch the probes, it starts to pickup voltage from radiation or induction from the body and will try to measure that.
when you touch both probes, it prob will go back to resistance and show a few Mega Ohms
@@TonyAlbus thank you master GREETINGS FROM TURKEY
@@tayfuncoskun35 Thank you, greeting to you too.
I need one
Yes, everyone does :)
Hello. What is this black boxes with red, yellow, green and black banana terminals?
Hi, its a breakout-box for a scanner card of the Siglent SDM-3065
th-cam.com/video/sjQbYiozx1k/w-d-xo.html
th-cam.com/video/UJDWaPxRHO8/w-d-xo.html
Nice video, have you done any reviews on Clamp multimeter(s) that can do DC amps.
PeaceFromOZ
The OWON will be coming soon.
can both be always on without the automatic turn off?
Hi, i am not sure, maybe you can ask the Kaiweets service center, i usualy switch mine off after use.
@@TonyAlbus they have a usb cord shown on the picture of km601 when this model does not even have a port for that loll
@@matrixmodulator i would not know, when the devices i tested had a usb cable it could be connected. but i don't remember the models.
Wondering what is the difference between the KM601 and KM601s ?? I have the KM601
Yes only rechargeable battery, specs also the same. i will add a link later with all 4 meters specs compared.
Kaiweets Compare: www.tonyplaza.nl/download/YT0367/kaiweets.pdf
601s replaces AA batteries with rechargeable and adds a kickstand.
I have yet to see a "smart" multimeter that actually will do at least 90% right. At least it beeps with the diode test which is a good thing. And, as usual, the bargraph is just a gimmick since it has exactly the same update speed as the digits themselves.
i see them as Electrical testers with digits display, not for high level electronics.. Yes correct, the bar has same sampling as the digits.
For basic stuff or a starters meter its nice.
The bargraph can be useful to see quick oscillations or changes but otherwise useless. Still looks cool though.
@@jonfreeman9682 Yes but it only makes sense if the sampling from the bar is faster then the digits. on this meter that is not noticable faster.
@@TonyAlbusI don't agree. Regular pattern of changes will be easier to spot with the bar graph. Not sure how often that would actually be useful however.
I don't know, probably I'm just old skool, but this is just too "flashy" for my taste. And that auto-select, hmm, I don't think I would need that. The 602: The screen is big, but the half of it is used to display where the leads are + that top range/function big part. Doesn't add much information. On both, they could just display the selected function and range, instead of that big half circle pallet. That would be much technical. Now it looks just like a toy. The display has nice big contrast, but yeah, no 🙂Form-factor/size is nice though. I have looked it up, the accuracy for DC is +/-0.5% +3dig, and for AC it is +/-0.8% +3dig. Those 10 000 counts lose their meaning. For example is you have 1.000VDC (0.992 - 1.008), and 1.000VAC (0.989 - 1.011). You could just as good have just 1000 counts like 0.99 - 1.01VDC, and 0.99 - 1.01VAC. But okay, as they state on the site: "With this smart digital voltmeter, you can solve industrial, vehicle, and household electrical problems"., it is not a Lab instrument of course.
Same here :)
In your opinion, which is better and which one do you advise me to buy?
I would go for the one with the most counts (digits)
Sir Finally Which Mutimeter Is Latest And Best KM601s Or KM602?? And Why??? Please Reply
Hi, i made the video so you can decide yourself which is best for your use.
😀❤👍🏻💯
Thank you!
🙂👍
Thank you!
mH posible?
if not in the video i think No