I’m a apprentice for finish carpentry right now, we’re running a similar molding but made of walnut but all around this big second floor opening. It was a pain to put into place because the framing wasn’t perfect so we had to remove material from the nose and plane the floor bit because of the lip it had. I like watch some of your content. Helps me understand what the other carpenters are saying or trying to do.
Perfection! For the last bit against the wall I started to score the remaining cut line and remove just a little bit of material so that you can fit the multimaster inside without trying to plunge it leaving that kind of burned jagged edge. Anyways love the content!
I feel like I’ve always called those rounded caps/moldings “bullnose”… terry 😂 however you said it 😂 Good stuff in this vid. Informative and easy to interpret. Great content
I swear my phone or TH-cam is reading my mind.... 🤣💯 I was actually wondering about this....... and then this short pops up in my feed.. Idk whether to be thankful or fearful. 🤣💯
If at all possible I usually opt to screw down a board for the flooring installers to go to and that way the nosing goes down like a factory edge. BUT things don’t always go down like that and when you have to cut back flooring the track saw is the way to go!
Definitely had lippage. You can install the stair nosing first the install each wood plank to the nosing flush. That saw guide is cool and I can see why you'd do it this way for speed
I need to get a track saw. One of the only tools I've ever sold (bad time in life) was my panel saw & seems a track saw would just about do the same & take up a LOT less space
Looks much better than my railing area. Year 2000 split level with that ugly 6" x 3/4" trim sitting under the rails. Also rounded so you can't easily trim it to hide the edge of my wood flooring. Ready to tear it all out😅
We always put the nosing on before the hardwood. A remodel this could be helpful. I never cut existing hardwood without hitting nails and trashing the blade
Good video and good tips. You don’t have to necessarily buy longer track. You can buy 1, 2 or 3 tracks the same size and get the joining bars so you can make tracks the length you need or at least reduce the amount of times you need to adjust your track.
I made a 10 ft track saw guide of 1/8” Baltic Birch. It doesn’t have the rubber grippers on the bottom side but it cuts a straight line. Save your $400
That track saw was a great purchase for me back in 2020. Grabbed it to do a butchers block countertop and I'll tell you what. Easy to use and in time you will start searching for projects just to be able to use it. P.s. get that long track bro!
I would like to change out my stair rail and baluster’s. They’re side mounted to the outer string and I want a more modern look to have them on top thread side. Any idea how I could do that or a way I could send you pic so you could see.
Not going to lie my friends call my multi tool my vibrator because I love to use it all the time! And I’m not gonna lie I am surgical with that thing!! I have even used it to remove a cast from my moms arm!!
Nice. Im working on the track saw. Most jobs people ask me where the track or table saw. I say your looking at it. I can dam near shave with a skill saw
I’m a stair guy for a living. Instead of this ugly premade nosing cut the flooring material on a 45 3 times. If it’s 7 1/2 inch you cut one at 4 1/8 1 1/2 thickness profile then 1 inch return on the bottom. Round over with 1/8 round over bit when glued and nailed then stain with color matched minwax from sherwin (water based) I charge 15$ /LF LABOR ONLY to install these. Looks perfect as it’s made from the floor material and looks much higher end than this outdated rounded stuff
Cats pecker😂 that’s a new one. I was thinking that the other I don’t know how I served without a track saw for the last 30 y. Have you seen the festool track saw it has a cross cut capability also the new festool portable table saw I has a slide capability and digital readout you turn the dial it’s pretty amazing…small but awesome
@@w.k.d.constructionllc no not the saw track the thing you used to mark your straight line... it had what looked like an extending piece ? Was red on one end I believe
“Back up terry!” 😂😂
😉
You sir, are too legit! Absolutely love your finish work!
Thank you!
So legit. So do not quit.
A cat’s pecker has barbs on it. Once you use a track saw, you’ll be hooked and screaming about how good it is.
That’s right!! 😆
Bahahahahjajaja
"The cat's pecker!" I immediately subbed.
Well thank you very much!!
That's clean
🤙🏻
@@w.k.d.constructionllc 9
The narration in this video is second to none. 😂
🤙🏻 thanks for watching
When I heard bag up Terry I fuckin lost it. Back it up Terry bag up bag up ohhh Terry
😉
yep track saws are the shit, was hanging onto the skill of cutting a straight line to long myself haha
🤙🏻 love mine!
I’m a apprentice for finish carpentry right now, we’re running a similar molding but made of walnut but all around this big second floor opening. It was a pain to put into place because the framing wasn’t perfect so we had to remove material from the nose and plane the floor bit because of the lip it had. I like watch some of your content. Helps me understand what the other carpenters are saying or trying to do.
Nice and thanks for watching!
get used to dealing with rough framing and having to plane and rip stuff up to fit it nicely 👍❤
Thats clean bud ! You just changed my mind on buying a track saw.
Definitely worth it! You won’t regret it
Freakin gorgeous. What a great fit!! Looks amazing.
Thank you!!
You will love the longer track when you get it. They are fantastic
Yessss, I need one
Size matters
Nice transition to the finished stairs as well had to rewatch to admire those stairs
🤙🏻 thank ya, I also have videos on the stairs themselves!
It's not called a multi-tool.
It's called a guy-brator.
😆
Perfection! For the last bit against the wall I started to score the remaining cut line and remove just a little bit of material so that you can fit the multimaster inside without trying to plunge it leaving that kind of burned jagged edge. Anyways love the content!
Ya, I did score it with my knife. That way the splinters will stop 😉
Great job Coach👏🏽👏🏽👏🏽
Appreciate it
I need to buy a tracksaw soon.. tired of using my level & vicegrips lol
Tracksaw is awesome. You won’t regret it! I’ve used mine a ton since I bought it
I like your style, nice and informative and straight to the point
Appreciate it boss!
Nice job matey 🎉
🤙🏻
I feel like I’ve always called those rounded caps/moldings “bullnose”… terry 😂 however you said it 😂
Good stuff in this vid. Informative and easy to interpret. Great content
Thanks for watching!
I swear my phone or TH-cam is reading my mind.... 🤣💯
I was actually wondering about this....... and then this short pops up in my feed..
Idk whether to be thankful or fearful. 🤣💯
Crazy sometimes!
I recommend leaving the railing off. It’s good to add some physical challenges to any project.
🤔
Yeah coach!
Yessir
I waited too long to get my extension, best purchase for that Makita, order today, dont wait
I know, I know! Gots to get one
If at all possible I usually opt to screw down a board for the flooring installers to go to and that way the nosing goes down like a factory edge. BUT things don’t always go down like that and when you have to cut back flooring the track saw is the way to go!
Yessir! 🤙🏻
Holy shit, spicy Dan-o’s does FLOORING!?! 😳😳
🤔
Back it up Terry! Ohh lawd 😂😂
😆😉
Definitely had lippage. You can install the stair nosing first the install each wood plank to the nosing flush. That saw guide is cool and I can see why you'd do it this way for speed
Very beautiful work man.
Thanks boss
I need to get a track saw. One of the only tools I've ever sold (bad time in life) was my panel saw & seems a track saw would just about do the same & take up a LOT less space
Track saw is amazing! Definitely recommend it
Looks much better than my railing area. Year 2000 split level with that ugly 6" x 3/4" trim sitting under the rails. Also rounded so you can't easily trim it to hide the edge of my wood flooring. Ready to tear it all out😅
😬
Fucking love this guy. Got it coach!
🙏🏻thanks boss!
It’s much better to use a 5”-5.5” nose. It won’t rock later like the smaller one will. Always use glue, screws and plugs. In for life.
🤙🏻
Nice work! Looks clean bro
Appreciate it!
Pretty good 🎉
💪🏼
I'm bout to buy me a track saw. Holy shit I have been fucking around.
Love mine, use it all the time
How does one become your apprentice? Like I'll move my life to learn for you.
You are very kind!
That shit looks clean boyyy!!!
Thanks boss!
I love your work!
Thank you!
And if you do the border first you can spline it to lock in the field pieces.
Nice stairs
Thanks
Track saw for the WIN!
Yesssss!
Looks great
Thanks!
Cleaaaaaan 🔥
🤙🏻
The first time I used a track saw I stopped at menards on my way home and bought my own. It saves so much time it's ridiculous.
I love it!
Need to get one of those to 😂😂
🤙🏻
LOL cats pecker, love it. What did we do the days before the $1000 track saws were invented?
Lookin good !
Appreciate it!
We always put the nosing on before the hardwood. A remodel this could be helpful. I never cut existing hardwood without hitting nails and trashing the blade
I planned to install my nosing this way. So I didn’t leave nails in my cut path. This is actually a more efficient way to install the nosing, IMO
What brand of saw blade do you use to get that clean easy cut and what size nails
This is the makita blade that came with the saw. 2” nails I believe is what we used?
Man! That's a beautiful look 💪😁👍
Appreciate it!
Good video and good tips. You don’t have to necessarily buy longer track. You can buy 1, 2 or 3 tracks the same size and get the joining bars so you can make tracks the length you need or at least reduce the amount of times you need to adjust your track.
Thanks, ya I know but I would rather have one continuous track. I feel it would be more accurate
Nice job
Thank ya!
I made a 10 ft track saw guide of 1/8” Baltic Birch. It doesn’t have the rubber grippers on the bottom side but it cuts a straight line. Save your $400
Great job!
Thank you
Sharp!
Thanks
That track saw was a great purchase for me back in 2020. Grabbed it to do a butchers block countertop and I'll tell you what. Easy to use and in time you will start searching for projects just to be able to use it. P.s. get that long track bro!
Yup, it’s on order! I use the piss out of mine. Never would have thought it! Love it.
Lmaoo "back up terr-eh"
😉
Great job!!!
Thank you!
Mad respect
🙏🏻
Yeah, back up terry!
😆
Beautiful
Thank you! Cheers!
Nice
🤙🏻
Nice 👍
Thanks ✌
I would like to change out my stair rail and baluster’s. They’re side mounted to the outer string and I want a more modern look to have them on top thread side. Any idea how I could do that or a way I could send you pic so you could see.
Hey! Coach! Any ideas on how to build a steep stairwell up to an attic?
Yeah, I've been wanting a track saw a long time. I'm more of a rough carpenter
Get one!
Not going to lie my friends call my multi tool my vibrator because I love to use it all the time! And I’m not gonna lie I am surgical with that thing!! I have even used it to remove a cast from my moms arm!!
If you use a cut line on the last two inches that you don’t reach with the rail saw then your muti tool cut will be tighter. 🙂
Yeah I know ,back up there.
Got me laughing
😉
Fcking Mint!👌
thanks
Nice. Im working on the track saw. Most jobs people ask me where the track or table saw. I say your looking at it. I can dam near shave with a skill saw
That’s some mighty fine work. I think I’m far enough back to say this, get the extra track! Lol
Ya. I definitely hear ya!
Use the nose as a bump stop. No after install long cut
Very clean.
Thanks
This guy's awesome! Is anyone else obsessed with that square ??
Ha, thank ya
I think it’s called “bull nose”. Ask for bull nose for stairs that match your flooring.
Remember when you try to do that when the saw's all? Before they invented the multi tool how do we get it done
Haha, IKR!
I’m a stair guy for a living. Instead of this ugly premade nosing cut the flooring material on a 45 3 times. If it’s 7 1/2 inch you cut one at 4 1/8 1 1/2 thickness profile then 1 inch return on the bottom. Round over with 1/8 round over bit when glued and nailed then stain with color matched minwax from sherwin (water based) I charge 15$ /LF LABOR ONLY to install these. Looks perfect as it’s made from the floor material and looks much higher end than this outdated rounded stuff
That makes way more sense that adding non matching material
Nice!!!!
Thanks
Coach, you can borrow my other track. 😎. Gotcha coach
Sweeet!
Looks good. Kinda sad the corners didn't line up still looked good tho
🤙🏻
Nice.
🤙🏻
We call these stairs, the Hipbreaker Descending Spiral
Looking great❤
Thank you
So beautiful
Appreciate it
I think track saws have a purpose but I always impress myself with a chalk line and steady hands
Maybe so, but you just can’t beat a track saw.
@@w.k.d.constructionllc I use it to cut more expensive plywood for cabinets so I know I have square material
Great channel
Appreciate it and thanks for watching
Dude is over here working his 12 step program
Yes sir love your work I do the same thing I love mine 3/4 hardwood
Thank you
That's it. I'm getting a track.
Go ahead!! I’ve used the hell out of mine since I bought it. Never thought I would use one really, boy was I wrong!
@@w.k.d.constructionllc I used to have the sceppach track saw. Got the 54v battery dewalt now. Both great tho
@@adubya8491 nice
Got it coach
🤙🏻
You need a long track brother.
Yes, I do!
“BACK UP TERRY!”
Put it in reverse!! 😆
You should exactly like the Dan o s seasoning guy
🤔
What fasteners are you using? 18g finish nails? Grk trim head screws? 23g pins?
Yessir, basically all of the above! You right on it
Cats pecker😂 that’s a new one. I was thinking that the other I don’t know how I served without a track saw for the last 30 y. Have you seen the festool track saw it has a cross cut capability also the new festool portable table saw I has a slide capability and digital readout you turn the dial it’s pretty amazing…small but awesome
IKR! I have seen it but not used one. It does look very useful!
Curious if you could tell me what brand and name of that flooring please
I believe this is the flooring. www.builddirect.com/p/Vanier-Engineered-Hardwood-Artisan-Brushed-Oak-Collection--15270511
If you need a track saw. You probably need a new line of work. Maybe landscaping?
You sure
You can't follow a scribed line?
I gotta know more about the extending straight edge
You can buy a full length track or smaller ones and attach them together. It’s a Very nice saw!
@@w.k.d.constructionllc no not the saw track the thing you used to mark your straight line... it had what looked like an extending piece ? Was red on one end I believe
@@JenniferFuchek ahhh, I see! Ha, it is my level. It is a Stabila brand plate level. It starts out at 7’ and extends up to 12’.