@@snots2k6I’m sure it doesn’t run. There’s so many things wrong with this. It’s a neat idea, but the physics do not check out. That’s a turbo from a keychain that clips to your car keys. There’s no lubrication, there’s no way the tolerances are tight enough. Not to mention if the compressor size matches the air output of the engine. It’s cute for scale, but it was never going to work. Props to him for trying though. I’m sure he thought it was going to work while he was building it.
Here’s the issue. The nitro engine is a 2 stroke. The pipe is tuned to make torque and power. Doing this you’ll lose all the torque. Not saying it won’t work, but also it’s gonna be really lean so you’re gonna have to richen up the mixture a lot or you risk burning it down
That was a long-ass video to not even see it fire up or run. Looks badass but the title of your video says will it work? Which led me to think we were going to get to see that result not will it fit. Any update videos?
Not sure of it will work but good luck. Hope it does. Where did you buy the kit. There has been kits sold over the years with little information or people running it.
Can’t wait to see it run, if you put the line on the charge pipe it may act like a fuel pressure regulator, as boost goes up so will pressure just an idea probably already doing it on the exhaust side
@@JovanMichaels Pressure nipple needs to be on the exhaust side, otherwise you will be chasing the tune. Also, you may need address the back plate and go with a bump box style plate because if the roto start bushing wears out you will lose crank case pressure. This type of engine relies pressure waves, hence the term "tuned pipe", you are now eliminating the expansion chamber. 2 strokes are sensitive to these changes, I would suggest to connect the turbo at the chamber exhaust outlet. I hate to sound negative and i hope ya get it going and don't be afraid of trying different combos. Oh you may want to buy an extra connecting rod and some glow plugs, don't ask me how i know, lol. good luck 👍.
I hate to inform you that it isn't possible for the turbo to compress the air/fuel mixture in the combustion chamber because a nitro engine has the intake port and exhaust port open briefly at the same time letting most of your air/fuel mixture escape out the open exhaust. The only way for the turbo to actually compress enough air and fuel into the cylinder to increase the HP and rpm range would be to put it on a 4 stroke gas engine and convert it to run on nitro. You'd be better off putting nitrous oxide on the 2 stroke. It makes them scream for a min. At least until the engine seizes.
Just a heads up . if your building that hpi you should go ahead and get the suspension kit they sell a full aluminum suspension with adjustable shocks and links ? Matching color?. Dude they even sell the castor blocks and drive cups . aveything that would be a badass Shelfqueen
You said the same sentence like 35 times in the last 3 or 4 min that could have had a sneak peak at turbo noises or something. I can assure you everyone whos watching knows you did it. Why not just show us.
I think you should put the tuned pipe back on the down pipe off the turbo will probably help it run better servers a purpose with motor timing witch will probably help the turbo work even better than it would with out it
Dude this is awesome! Ive been researching nitro rc cars as my next hobby and your channel has become a top one for me. I program and run cncs with mastercam so if you need a custom bracket or something made just hit me up. I plan on possibly doing some r&d on parts if i pick one for customization and all. If ya need a little part made or something, ill hook ya up just to see this thing scream! Also love the stang. I uae to build a race 5.0s as well. Love your turbo build! Keep killing it dude! 💪
Ok I'll admit it looks cool as hell! But, people talking about it being a toy makes me agree. How is the turbo going to get lubricated? In all honesty, I think it is going to run and make some cool noises for a little while...and then it's gonna melt itself. But it's also a nitro car and I know nothing about those motors...so who knows. I like being wrong and I hope I am!
@@JovanMichaels Hey, points for originality at the least lol. Not that I am looking for these, but if I see a turbo rc car again I can say "ah Jovan already done did that!" haha. Watching the new vid. Screw it, it runs right???
appreciate you homie! Jokes on them cause its just a cool shelf piece for me lol i could care less if it runs better or not… my electric cars are way better 😂🤘🏼
what a diiiirty how ever, vey clever click bate with takin the car out in the end and puttin fuel in and take a few pics on the road lookin like it was bout to be tested any second for the first time but then instead it was only for a 4 second b- role clip, and then picked it up and went back inside lololol. but all jokes aside this guy seems like the wizard of the rc world and knows absolutely everything in his head
Won't work sorry to tell you there probably won't be a video because it's would already been done it can't work because it's a nitro it doesn't work like that
Leave the body on and cut a huge side out where the turbsky is ?. What is that ? A 0.04mm turbsky lol brooooo it cant wait to hear it run . i gotta skip back and watch the exhaust pipe
Dude why make a video and not run it
video would of been wayyyy to long!
@@JovanMichaelsOK and, more views and watch time for you and we get to see it run
Thanks bro, not even going to waste my time.
@@JovanMichaels What a fucking waste of my life, how could you not run it
@@snots2k6I’m sure it doesn’t run. There’s so many things wrong with this. It’s a neat idea, but the physics do not check out. That’s a turbo from a keychain that clips to your car keys. There’s no lubrication, there’s no way the tolerances are tight enough. Not to mention if the compressor size matches the air output of the engine.
It’s cute for scale, but it was never going to work. Props to him for trying though. I’m sure he thought it was going to work while he was building it.
17 min later, mad I couldn't even hear it running 😂😂
Here’s the issue. The nitro engine is a 2 stroke. The pipe is tuned to make torque and power. Doing this you’ll lose all the torque. Not saying it won’t work, but also it’s gonna be really lean so you’re gonna have to richen up the mixture a lot or you risk burning it down
what a case of blue balls!!! start the car already
Where did you get the turbo from
Where did you saw that for the turbo kit
can i have the link to where you bought it?
That was a long-ass video to not even see it fire up or run. Looks badass but the title of your video says will it work? Which led me to think we were going to get to see that result not will it fit. Any update videos?
Been waiting ten years for someone to redo this right!
hope i didnt disappoint 🤘🏼
Its not possible you cannot boost 2 stroke engines… why? Because when cylinder sucks in air the exhaust port is also open
@@556andyyou can tho
@@556andyexplain all the 2 stroke snowmobiles that have turbos..? It’s very possible to run a turbo set up on a 2 stroke
Were turbo kit at
amazing ive always wanted do this same thing . wow
Bro!!!!! That is way more than Badass!!! 🇺🇸💪🏼
you know the deal man 🤘🏼
Sick video dude I’m damn near giggling like a kid
hell yeah. glad you enjoyed it🤘🏼
Bro!!!!! That is way more than Badass!!! . Dude why make a video and not run it.
appreciate it man.. if i were to put all the run footage in this video it would of been a hour long.. stay tuned, next video!
The fuel tank needs to have more pressure than the boost pressure, so the exhaust port should be before the turbine.
Not sure of it will work but good luck. Hope it does. Where did you buy the kit. There has been kits sold over the years with little information or people running it.
Its not a kit… i sourced all the pieces separately
Where did you biy the turbo
Can’t wait to see it run, if you put the line on the charge pipe it may act like a fuel pressure regulator, as boost goes up so will pressure just an idea probably already doing it on the exhaust side
yeah man thats not a bad idea.. next video will be the first run… we’ll see what happens
@@JovanMichaels Pressure nipple needs to be on the exhaust side, otherwise you will be chasing the tune. Also, you may need address the back plate and go with a bump box style plate because if the roto start bushing wears out you will lose crank case pressure. This type of engine relies pressure waves, hence the term "tuned pipe", you are now eliminating the expansion chamber. 2 strokes are sensitive to these changes, I would suggest to connect the turbo at the chamber exhaust outlet. I hate to sound negative and i hope ya get it going and don't be afraid of trying different combos. Oh you may want to buy an extra connecting rod and some glow plugs, don't ask me how i know, lol. good luck 👍.
Where can i buy one
Where can I get it
Where did you bought the turbo?
google tk10-r 🤘🏼
You gotta be somewhere near Louisiana the way you talk
florida
I hate to inform you that it isn't possible for the turbo to compress the air/fuel mixture in the combustion chamber because a nitro engine has the intake port and exhaust port open briefly at the same time letting most of your air/fuel mixture escape out the open exhaust. The only way for the turbo to actually compress enough air and fuel into the cylinder to increase the HP and rpm range would be to put it on a 4 stroke gas engine and convert it to run on nitro. You'd be better off putting nitrous oxide on the 2 stroke. It makes them scream for a min. At least until the engine seizes.
How and where did u get the turbo from
linked in description
You dont need preassure in the exhaust because the turbo makes the preassure
Just a heads up . if your building that hpi you should go ahead and get the suspension kit they sell a full aluminum suspension with adjustable shocks and links ? Matching color?. Dude they even sell the castor blocks and drive cups . aveything that would be a badass Shelfqueen
Looks like you done stole a turbi off a key chain 😂
similar but built a little better
Where can I buy it
Where to buy that turbo?😍
thats sound tiny turbo very² kick ♥️
I thought just now lol yeap 9:37time stamp it was just laughing like " dude " if it spits fire im gonna drop lol
how can i buy this turbo kit...im pay triple
the kit was made by me. The turbo can be found on google
make this custom rc with turbo totally worked and keep doing your the best 👍@@JovanMichaels
You said the same sentence like 35 times in the last 3 or 4 min that could have had a sneak peak at turbo noises or something. I can assure you everyone whos watching knows you did it. Why not just show us.
I think you should put the tuned pipe back on the down pipe off the turbo will probably help it run better servers a purpose with motor timing witch will probably help the turbo work even better than it would with out it
appreciate the info🤘🏼
Dude this is awesome! Ive been researching nitro rc cars as my next hobby and your channel has become a top one for me. I program and run cncs with mastercam so if you need a custom bracket or something made just hit me up. I plan on possibly doing some r&d on parts if i pick one for customization and all. If ya need a little part made or something, ill hook ya up just to see this thing scream! Also love the stang. I uae to build a race 5.0s as well. Love your turbo build! Keep killing it dude! 💪
man this is awesome! Thank you for checking out the channel .. and hell yeah man, thats rad. appreciate you watching the videos man🤘🏼
Use a micro nitros feed system
Hella haters 😂 that thing is sick bro
Ok I'll admit it looks cool as hell! But, people talking about it being a toy makes me agree. How is the turbo going to get lubricated? In all honesty, I think it is going to run and make some cool noises for a little while...and then it's gonna melt itself. But it's also a nitro car and I know nothing about those motors...so who knows. I like being wrong and I hope I am!
its a cool shelf item man.. really not that serious lol i enjoy all my electric cars a lot more 🤘🏼
@@JovanMichaels Hey, points for originality at the least lol. Not that I am looking for these, but if I see a turbo rc car again I can say "ah Jovan already done did that!" haha. Watching the new vid. Screw it, it runs right???
hi man have you correctly tuned your car
nope, dont think so
It's just for looks. That won't build boost or do anything. Probably run worse. At best it might make slight whistle
it looks cool as hell tho
When are you going to be posting the run video. I'm interested to see if this works
soon! next video for sure🤘🏼
@@JovanMichaels Just subscribed to make sure I don't miss it. If this works, the potential for the next level of Nitro Drag Racing is exponential.
Cant wait to see it running your creativity is on another level !!
thank you man! glad you enjoyed the video 🤘🏼
It's really gonna work.
i think so lol
Forced induction does NOT work on glow engines.
Good video bro. I hate how people always have to bitch about something. Can't wait to see it run.
appreciate you homie! Jokes on them cause its just a cool shelf piece for me lol i could care less if it runs better or not… my electric cars are way better 😂🤘🏼
You can actually buy a super charger kit for the traxxas 3.3 engine.
Price
Is that engine a .21 ?
need to be able to drain oil from pipe
bruv we need those links to buy them
there are no links… its custom
@@JovanMichaels damn i thought there would be at least something that I could start off of
Turbokeychains- tk-10r
Yeah won't work. May run, no gains.
looks cool tho
to many talk,people want to see how the turbo work,we dont want to see u talk to many
Where did you buy the damn thing???? Fuck
google
what a diiiirty how ever, vey clever click bate with takin the car out in the end and puttin fuel in and take a few pics on the road lookin like it was bout to be tested any second for the first time but then instead it was only for a 4 second b- role clip, and then picked it up and went back inside lololol.
but all jokes aside this guy seems like the wizard of the rc world and knows absolutely everything in his head
Won't work sorry to tell you there probably won't be a video because it's would already been done it can't work because it's a nitro it doesn't work like that
All that talk and never start that piece S*****
Dont waste your time on this video
LoL waste of time and money
another clueless nitro owner lol
Should have ran it to the front and had it sticking up from the bonet like the hoonacar
you got it dude… put one together
Leave the body on and cut a huge side out where the turbsky is ?. What is that ? A 0.04mm turbsky lol brooooo it cant wait to hear it run . i gotta skip back and watch the exhaust pipe
We’re can I buy this ???
tk10r is the turbo. I had everything else laying around.