OEM integration and tuning process with Audison Forza bit amplifier -

SOFTWARE UPDATE:
01:05 - bit Drive SW update
PRELIMINARY OPERATION:
02:07 - Checking of the input signal coming from the OEM Head Unit to the Forza bit processor and the correctness of channel assignment
04:10 - Analysis of the input signal using the input Equalizer tool before the Configuration wizard process
CONFIGURATION WIZARD:
05:02 - Configuration wizard - Input configuration
05:35 - Configuration wizard - Input sensitivity
06:42 - Configuration wizard - Input delay / Polarity check
06:55 - Configuration wizard - Input de-eq
09:17 - Configuration wizard - Output setup
09:40 - Configuration wizard - Output distances
10:27 - Saving and finalizing the file when the Configuration wizard is completed
10:57 - Checking the input signal routing with the Master mixer tool
11:20 - Analysis of the input signal using the input Equalizer tool after the Configuration wizard process is completed
SOUND TUNING:
15:12 - USB microphone in-car installation and configuration
16:18 - Individual analysis of speaker's emission using Acoustic RTA
17:38 - Summing seven and eight channels to control subwoofer level with a single slide
Sound tuning using Acoustic RTA and parametric Equalization
18:17 - Matching the target curve of each speaker using the parametric equalizer and level
24:37 - Tuning the overall sound without compromising the stereo image using the FINAL TUNING EQUALIZER
25:28 - Saving and finalizing the file when the tuning process is completed

[@stevendphoto]

Got my DRC-AC, ready to have my AF M5.11 installed...thanks Audison...!

[@AudisonItofficial]

Sound great!

[@JMZAUDIO]

Was that mustang equipped with the bang and olufsen system? Would this amplifier be able to integrate with those A2B factory amplifiers ford vehicles have? Or would it be better adding a pac audio ap4 to integrate into the radio and send a flat signal to the forza amplifier?

[@VendendoNaInternetAgora]

A technical question... We know that the Forza amplifier has an integrated DSP that can “individually” control all the adjustment settings of a speaker, for example a Mid-Bass. But when I choose to make that type of bridge connection, for example using channels 1 and 2 together to feed a mid-bass, what happens to the entire sound configuration, in the DSP, for this specific mid-bass? If I am feeding this mid-bass through two channels of the amplifier (channels 1 and 2 at the same time), then do I have to repeat all the adjustment settings (frequency cut, time alignment, etc.) on channels 1 and 2 of the DSP? Or is there some feature in the DSP where I only need to choose one of the two channels to make the adjustments and I can disable the other?

[@silicondt1]

When you run the setup wizard I assume you do not want speakers hooked up yet?

[@silicondt1]

What track are you using to do the acoustical tune? Pink noise?

[@joeridgley2027]

What rta mic are you using and does it make a difference which one you use?

[@CHELBOSUL]

Tempted to buy AP F8.9 bit. . . Will work with this software ? Bit drive

[@SwiftSystems1]

Is there drivers for Windows 11? C8.14

[@residentflash5826]

Which track do you playing while the tuning process?

[@AudisonItofficial]

You can find all the test traks here: audison.com/support/test-tracks/

[@drrckhamilton]

My absolute favorite thing in car Audio is a dsp. I own more than I care to admit. I simply find it fascinating!!! I have multiple Audison as well as some dsp from other top manufacturers. In my opinion, Audison has taken a giant step forward with this new software, and they may be leading the pack........absolutely amazing hardware and software!!!

[@mikebecker8027]

That's not what they asked, I think they want to know what track do you use when tuning the amp ? pink noise ? @@AudisonItofficial

[@AudisonItofficial]

audison.com/bit-drive/

[@mrbungle4163]

i've got this installed in my seat leon. this is the most complicated piece of crap ever made. do not buy this unless you are an expert in setting EQ. christ, this is so ridiculous and pathetic. how are we expected to tune this? this is a huge waste of money. just get a normal amp. avoid this!

[@devgru1079]

Will this software work with the virtuoso?

[@AudisonItofficial]

bit Drive software is dedicated to Audison Forza bit amplifiers. Regards