Stress Analysis of Stepped Bars of Area 900 sq mm & 600 sq mm using Ansys APDL 2019 R3 in Easy Steps

Experiment 2 | Consider the Stepped bar Shown in figure. Determine the Nodal Displacement, Stress in each element, Reaction forces | What should be the Preference while Solving Bar Problems in Ansys APDL | What should Pre-Processors while Solving Stepped Bar Problems in Ansys APDL | What Should be Material while Solving Stepped Bar Problems in Ansys APDL | How to add Cross Section of Bar while Solving Stepped Bar Problems in Ansys APDL | Why Real Constant for Link 180 are no Longer Supported in Ansys APDL | Specific forces from the previous F command were applied only to the selected NODAL LOAD set | How to Create Node using Modeling while Solving Stepped Bar Problems in Ansys APDL | How to Auto Numbered elements while Solving Stepped Bar Problems in Ansys APDL | How to Define Load while Solving Stepped Bar Problems in Ansys APDL | What are General Post Processing Steps while Solving Stepped Bar Problems in Ansys APDL | Introduction to Plot Control in Ansys APDL | How to Animate Analysis in Ansys APDL | How to Save Images of Results in Ansys APDL
--------------------------------------------------------------------------------
About This Video
Hello Guys!!
I have made the video on Ansys Mechanical APDL Tutorial where I have Explain How to perform Stress Analysis of a Stepped Bar of Area 900 sq mm and 600 sq mm, with value of E as 2e5 and 0.7e5 respectively in very Easy Steps. I hope You Like this video and Subscribe my Channel
--------------------------------------------------------------------------------
Queries Solved in this Video
1. How to Change Background of Ansys APDL Screen?
2. How to Clear Previous Analysis Project History from Ansys APDL?
3. What should be the Preference while Solving Bar Problems in Ansys APDL?
4. What should Pre-Processors while Solving Stepped Bar Problems in Ansys APDL?
5. What Should be Material while Solving Stepped Bar Problems in Ansys APDL?
6. How to add Cross Section of Bar while Solving Stepped Bar Problems in Ansys APDL?
7. How to Create Node using Modeling while Solving Stepped Bar Problems in Ansys APDL?
8. How to Auto Numbered elements while Solving Stepped Bar Problems in Ansys APDL?
9. How to Define Load while Solving Stepped Bar Problems in Ansys APDL?
10. What are General Post Processing Steps while Solving Stepped Bar Problems in Ansys APDL?
11. How to Animate Analysis in Ansys APDL?
12. How to Save Images of Results in Ansys APDL?
--------------------------------------------------------------------------------
Previous Video Link:- • Stress Analysis of Bar...
--------------------------------------------------------------------------------
Playlist
Ansys APDL 2019 R3 Playlist:- • Finite Element Analysi...
SolidWorks Tutorial Playlist:- • SolidWorks Tutorial Be...
Mechanical Joints Playlist:- • Mechanical Engineering...
FSAE Playlist:- • All About FSAE (Formul...
--------------------------------------------------------------------------------
Social Media Link
📷 Instagram :- simplerandomkn...
Facebook Page :- simplerandomkn...
Twitter :- simplerandomkn...
--------------------------------------------------------------------------------
HASHTAGS
#ansysAPDL #finiteelementanalysis #ansysapdlstructuralanalysis #ansys2019r3 #mechanicalengineering #simplerandomknowledge

[@SimpleRandomKnowledge]

Hello Guys!!
I have made the video on Ansys Mechanical APDL Tutorial where I have Explain How to perform Stress Analysis of a Stepped Bar of Area 900 sq mm and 600 sq mm, with value of E as 2e5 and 0.7e5 respectively in very Easy Steps. I hope You Like this video and Subscribe my Channel

[@BAPPA_Rawala]

Hello sir 🙏🙏 This video is really helpful sir thanks a lot for the video , But in my Ansys After selection of Force /Moment it is showing that" Specified forces from previous F command were applied Only to the selected NODAL LOAD SET " And this iam not able to apply the loads please help me sir 🙏🙏🙏

[@SimpleRandomKnowledge]

I guess your ansys version is above 2020!? Actually I got many comments regarding this, most of them were having ansys 2021. So I suggest you to go for stable ansys version below 2020. Try with ansys 2019 r3.

[@BAPPA_Rawala]

@@SimpleRandomKnowledge okay thanks alot for ur reply but I have heard that we can solve the same problem through commands also Do u have any idea about this ??🙏🙏

[@SimpleRandomKnowledge]

Sry, but I don't have any idea about it. I will do research on it an make one separate video if I get solution. Try to search for solution on forums.

[@BAPPA_Rawala]

@@SimpleRandomKnowledge thanks alot for your reply that means a lot ❤️❤️🙏🙏🙏