Begs the question if it's just more cost effective with time and money to just replace the crank rather than pay someone to do this who has a ton of experience in it. This definitely isn't cheap to get done by someone who knows his or her shit very well.
This video is beyond priceless. This is like watching magic and your father is the magician. I am 81 years old, have worked on automobiles and machinery much of my life, but have never seen such an excellent introduction to anything as complex as crankshaft grinding as this. Thank you very much for sharing this!
I am 23 and watching this, haha. I have been enjoying these videos quite a lot and at the same time learning so many new things. My dad, grandpa, and a lot of my family are/were machinists, but sadly, I never got a chance to see them in action. My dad had a machine shop similar to these good folks until I turned 13, and we moved away, and he switched his line of work. I am also becoming an engineer, and I think watching and understanding how things are actually made/maintained/repaired is such a valuable experience that 90 percent of the engineers have no clue about. Kudos to this dad/son duo for making these videos!
These skills are extremely rare because it’s usually cheaper to simply replace the crank or even the entire engine. But when there is no other way you’ll need experts like this.
The movement pattern of your Dads hand tightening the steady rest just the right amount while grinding is a true testament of a master machinist becoming one with his machine. It's a humbling experience to see this kind of dedication to the craft.
As a retired tool maker he didn't know what size radius he had only that it was similar in size to his radius gauge this radius on crank prevents cracks from forming when under stress we always ground radii on punches and other tooling that were under stress but on profile tooling if specs. called for .250 radius we ground that dimension to .250 plus or minus .0002 to have proper punch and die clearance.
Fantastic video I'm a retired 35 year diesel mechanic, all the parts we put into the engine are nicely wrapped from the machine shop and ready to go. I never knew until I saw your video how much time and precision goes into getting those parts ready. I guess I'm trying to say it's machinist appreciation day. 😀
Watching your Dad is like watching my Dad when he was still here. From lubing the chucks to the way he explains everything. Brought a smile to my face. I was lucky to have a wealth of knowledge just like him.
We are all very privileged here to be watching a true master at work, one who is totally at one with his machine. SImply put, this is a grinding master-class. Many thanks for taking us along on this job. David in the UK.
I saw no mistakes. Only happy little accidents. Watching this man set up a machine and work is comparable to watching Bob Ross. So educational, yet relaxing.
I ground crankshafts for many years using a Berco RTM 300. Loved the "stabilizers" between counterweights! I even had a little umbrella shade on my Arnold gauge too. You guys have made a great and fun video explaining this process. Thank you crank brothers!
I absolutely LOVE how clean your shop is. Most machine shops I’ve been in is an absolute cluster f**k. If I was local I’d feel confident hiring your service
Yeah one of the first machine shops I worked in was a filthy clusterfuck. Piles of tools, parts, everything coated with a thin layer of grease & metal shavings. I offered to clean it as it was making jobs take longer always having to search for things. Shop owner didn't want to pay me to clean it, so I cleaned it on my own time for free.
I’m glad I found this channel I believe I’m just south of their shop . Not many good machine shops around anymore. I’m impressed by the care they have taken in machine work .
34:19 “okay I’m going to rotate the crankshaft 120 degrees” does it by feel. Lands the index only a couple thous out eyeing it. Master at his craft. Loved the video
67 year old truck driver here. The ART of grinding cranks like this has been a fascination since I was a kid and overhauled my go-kart's 5hp gas engine. The skills, talent and most importantly patience to do this job the right way, everyday! God bless you for your talent, and thanks for letting us look over your shoulder.
I lost mine in 2007 and still miss the projects with him. Watching other dad's with there kids doing things like this bring back the great memories with mine, no matter what the project was!
I really enjoyed seeing you and your dad work together. As a young boy growing into a young man, I got to work with my dad who was an expert butcher in our butcher shop. There's nothing like learning a trade from a man that not only is an expert in his field, but loves his work and loves teaching his son to know the trade as well. I still appreciate my years in the market with my dad.
Thank you both so much for this VERY interesting video. As an OLD(80) yr. old 'gear head' from the big block era of the 60s, and a guy who still changes oil and greases the front end of my '02' Ford E250, I really appreciated the workmanship, and honesty shown in this video. BTW, I watched the tear down video of the 327. I rebuilt my share of small blocks way back when, that was a mess. Thank you for both videos. Sincerely, Bruce F. Raykiewicz.
I used to work at cummins JEP putting those cranks in the ISM and ISX engines. What a great place that was to work. Dunno what it's like these days but it was utterly astounding how good the workers there had it. Quality was absolutely amazing also.
I had never seen this done before and had long wondered about how it is done. The attention to detail and personal dedication to excellence that are required are simply incredible! Hopefully there are a few young people out there learning this from experts like your dad.
Me! 🙋♂️ 23 and an engineering student. I found their channel and felt like I struck gold. Invaluable knowledge for all engineers who design the darn thing, haha!
One of the MOST Interesting Videos I’ve watched. I always thought machinists were very very smart operators. Now I know how important they really are. I’ve had several cranks ground but never realized how special they are. Thank You Thank You 😊
My father was an auto machinist for 50 years, being an instructor toward the end. I always saw him by the crank grinder and heard his stories about grinding cranks but never saw him set one up. Real interesting on how it all comes together. Thanks for the video.
Chatter is always the main enemy in turning these large cranks. Thank you for the demonstration of crankshaft grinding. I also subscribed and look forward to more similar demonstrations.
After watching these videos I really appreciate the level of precision and skill that goes into machining engine parts. I also understand why it costs what it does. Love the videos you guys!
I'm just finding you guys and my goodness I love this. I'm 4 years into working with my dad as a diesel mechanic, so we're a father son team doing the before and after of your work here. He has like 45 years in the industry and he's been a great teacher too. Keep it up yall
This is gold. I missed my calling early in life. This kind of work is what I should be doing. Really appreciate the time and patience you both put into sharing your craft and profession. It is something to behold.
Our shop teacher told us to start any grinder gradually as moisture gravitates to the low spot and an out of balance grinding wheel can shatter. If we had shop early on Monday you could hear the grinder vibrate on first. The load reason is valid too. Wobbels the mad Aussie.
Thank you for this content! As a regular machinist for nearly 30yrs, I've always wondered how cranks were ground and never have seen a machine like this. What an amazing piece of equipment!
I suspect your father was extremely disappointed in himself with the mishap leading to the chatter, but the true professional in him did a great job in recovering the crank. I hope in time under his tuition you inherit his wealth of skill and knowledge and can continue to build on his legacy.
Most people have no idea how much work it is to hook a crank on the grinder for such small grind work. The setup will easily eat several hours - I can certainly appreciate the work involved.
I have a totally deeper level of respect for the engine machinists that did work for me when I was building engines in the 70’s - 90’s! Thank you for opening my eyes. Your shop would be my go to shop if I was still in the industry.😊😊
Great video!! My father ran an engine machine shop for 40+ years. He use to do a lot of crank and cam work, and there were many cranks that came in he used the Eutectic spray welding on to bring them back into spec without taking too much material off. Grinding camshafts was the coolest thing, he use to grind a lot of custom profiles and lobe separations on them, use to build them back up if they were worn too.
You guy’s are amazing to watch. You’re dad knows what he’s doing and cares about every single thing he does. Around here we all get scared when we have to take something to a machine shop because we aren’t sure what kinda hack job we’re going to get back. Keep up the good work!
I've seen quite a few guys that consider themselves machinists but your dad is up a few levels! Quite amazing attention to detail and beautiful result - could spend all day watching. Best wishes from the U.K.
i was a union Field machinist/millwright for 15 years and i always enjoyed getting a working buddy like your farther, a person to take the time and teach the younger Generation all the little tricks and full of wisdom of the trade. i appreciate the channel man. yourself and the Pops are doing an amazing job. kepp up the great work!
Love your work,guys. I trained as an engine machinist/builder at Cummins in the late '80's.We did everthing in-house except for crankshaft grinding,,so it was good to see a Cummins crank getting machined correctly. Alll the measurements and magnaflux was done by us. To measure the fillet radius,we had different size spheres attatched to the end of a thin metal rod.Our magnaflux was the biggest in the southern hemisphere,300 volts d.c. This was at Cabramatta(aboriginal word),Sydney,Australia. Subscribed!👍
Thanks Jim, very cool, I’m an old truck mechanic and back in a day and we’re talking 1975 I used to work on Cummins 318s and what I remember most about them is that they used to snap crankshafts. I’m not a machinist I’m a mechanic.
Amazing to see how willing and happy your dad is to do this work while being filmed and asked numerous questions. As someone who dabbles in machining quite frequently on an engine lathe, I have an enormous respect for his ability to maintain focus and tight tolerances under such circumstances. It's so easy to become distracted and make mistakes when you're trying to hold tolerances to tenths of a thousandth. Mad props to both of you!
Wonderful! It is apparent that this gentleman is an artist and the machine is his instrument, as if he's a musician. He tunes it and accomplishes great results. I am reminded of my grandfather, back in the '60s, as I'd watch him work in his home shop. I wish I'd learned more from him at that time. Thanks for a fascinating video.
To say that this is "oddly satisfying" is a massive understatement. As a truck driver both driving and wrenching on trucks, I've seen "in-frame" overhauls up close. My father created a trucking company and in those early years I was a grease monkey. Dad had a couple of crankshafts standing on end in the corner of the shop. They were for Big Cam 400 Cummins. He always said they were good and now I know why he believed that. The details of dialing in all of those measurements blows me away. What an awesome video! Couldn't take my eyes off it!! Thank you very much for giving me a better understanding of the inner workings of a great engine!
That cleaning guy is really getting the hang of that crankshaft grinder! Seriously, thank you for showing us the entire process of grinding a crankshaft. We appreciate the in-depth content!
I love the way your dad is meticulous about making sure it's right and the fact that he teaches speaking out loud of everything that he does that is awesome
It was a pleasure and honor to watch and observe the master at work. Great job. Im always amazed by the skill and knowledge it takes to complete this type of work.
My gosh, I had no Idea the work that is done on a crank. The machine is awsome but the operators patience and experience are of equal value. Thanks guys
Hi Jim I must compliment you on attention to detail on the process of Crank-shaft Grinding , I would loved to have you as my teacher when I was serving my Apprenticeship many moons ago , I would consider you as the Master of all , people like are hard to find now-days, Keep up the good work Regards to Tim in Ireland .
Thanks for showing the whole process. Crankshaft grinding is one of those "black magic" processes that your Dad has spent years learning. That crank is probably more consistent across each journal than it was out of the Cummins factory. I don't think the small drop in bearing size will really matter.
Just found your channel thru your tear down of Scanner Danners engine. My father was a tool and die maker from the 40’s, 50’s and 60’s, I turned out to be an auto technician, 50 plus years and still doing it, and my son is a welder. A family of tradesmen. This was extremely interesting to me and all I could keep thinking of was the engineering and design of the grinding machine and lathe. Amazing.
I have not finished watching the video, roughly half way through. It is my favorite so far. Great dynamic and the wash guy breaks it down so well. You guys make great content.
I used to do this for a living as a apprentice then went and did a apprentice boilermaker welder more money but I did enjoy doing motor work. 🇦🇺🙏 we had the same machine at Mendham engineering I didn’t see you test the wheel with the ring test but you guys look after your wheels no doubt. We had books that would give us the off set for the weights so we could set up the big ends and the mains we just Center of the crankshaft. Love your work guys I do miss it sometimes. 19:54 what a smart idea. After watching this video our machine was a little bit different it was about 35 years ago.
this long format is awesome. I've had a idea how its done but seeing how much really gives me a new appreciation on how much work has gone into parts i've sent out.
These lessons from your pops are incredible. He's a solid machinist, I'm glad you're getting to have this kind of life and experience with him. Best wishes to you both and thank you for your time and information!
always wanted to see how a crank was ground....now this 74 and retired automotive and industrial mechanic can rest...thanks....accuracy is hard work...takes a special person.
Thank you for the endless hours of videoing, editing, and uploading. Allowing us to see the tedium and nerve it takes to properly prep engine parts. Through all the perceived blemishes, I personally see greatness in what your doing. Thank you for allowing us into your business. Luckily there are tolerances, and your providing enrichment in my life. 👍👊🇺🇸!
The true meaning of "They don't make them like they used to!" Unreal to see true talent of you guys work your magic and appreciate the attention to detail!
Fascinating work- you present your subject with such entertaining clarity- I would watch you experts at work all day! Always wanted to know how cranks were ground and how they were balanced and you've demonstrated them both so well. Thank you!
That is years of experience there speaking. Nothing better then a machine shop that knows every little thing like this about just about any engine and what's best to do for it.
Thank you so much for a great video. I loved how long it was and how much you explained in detail for all of us. After every video I always say, I wanted to see more lol. Thanks again to both of you for showing that there are still people out there that have pride in their work. Definitely far and in between these days.
You actually get the crankshaft closer to the correct specs than most engine machinists I've seen in 20+ years. You are a inspiration to be better than it will do
Begs the question if it's just more cost effective with time and money to just replace the crank rather than pay someone to do this who has a ton of experience in it. This definitely isn't cheap to get done by someone who knows his or her shit very well.
@@nexpro6118 In some cases it is cheaper to just buy a new crankshaft. With something like a 5.9L Cummins it'll be $800 - $1000 for even a cheap Chinese crankshaft. Whereas it'd probably cost $200 - $300 to have the original crank reground. Which I've had such bad experiences with the cheap Chinese engine components that I'll personally never use them unless I absolutely have to. I've seen so many pistons, cams, cranks, connecting rods, bearings, etc. that are either manufactured way out of spec, made out of inferior steel/aluminum, or both. If it's something like a carburetor for a lawnmower then they usually work fine, but for a big 130lb Cummins diesel crankshaft...there's no way I'd take a chance on it.
Your dad preserving motor windings by starting the wheel in sequence... exceptional attention to detail and acknowledgement that the tools he uses need to be respected! I love this channel please give us more 4.2 Jag!
I believe that machine is over 30 years old as well... it looks to be in excellent condition. You can tell he absolutely takes pride it what he does and his machines.
Im 60yo was raised by my father who grew up on a farm so I know how to pull off all the crazy ways to keep an engine going (aka backyard hack). watching your videos is truly amazing...
You guys did a great job with this video. I was in the machine shop business from the mid 80's to the mid 90's in west Michigan. All the information that you were mentioning on the setup brought me back to things that I totally forgot about a long time ago. I spent my time on a van Norman about same color as yours. We did everything from BS engines to big diesel. Thanks again for producing a video of the trades and craftsmanship that are not seen so much anymore.
Niesamowita praca ! Doskonały nauczyciel który potrafi w bardzo prosty sposób wytłumaczyć wszystko od podstaw. Nie ma żadnych w wątpliwości że jesteście profesionalistami w swoim zawodzie. Podziw i szacunek za wspaniałą robotę. Pozdrowienia z Polski.
I USED TO RUN A VAN NORMAN CYLINDRICAL..we did cranks we did hydraulic rams and polished with cork belts..i know this work and with experience it becomes old hat but ur dad did a great job of his explanation/execution and demonstration both your detail to set up shows in the finished quality of your work..
Been selling Industrial Tools for over forty years now. It is so very rewarding to see Craftsmen who know how to use and get the most performance from their tools. I especially enjoyed your Father showing his skills in Indicating the Crank Grinder before beginning work on each journal. I would love a visit to your shop just to sit and watch you two.... 😮
Great job without getting out in the weeds. Old Machinist myself. I have run Storms, van Normans. Peterson and Berco.. Again. Great job, not too many of us left.
Love the content! From a marketing pov, you may want to A/B test just posting the video. A premiere sends the notification when you first schedule it, but from the audience pov, it’s just a false alarm. Then when I try to find the video again in my notifications/subscription feed, I have to scroll back days to get the video. I’ve heard that creators get better notification stats and click through rates by avoiding premieres. Just something to consider, tho I saw your comment about engaging with the audience live and that’s valid too. Either way, you guys have been a part of my Sunday evenings for a while now. Love the consistency!
I’ve tested both, and I find to have better luck with premiers. I understand it being a tease when it announces it ahead of time, but it also gives the audience time to plan their schedule in advance to make room for watching the video. From my perspective as both a creator and a content consumer, I don’t get why people get so upset over the content they get to consume for free. No different than a movie trailer coming out 6 months before the movie actually comes out.
@@JAMSIONLINE I love the perspective. Yeah I don’t get people getting upset either. I guess consuming content is so low-friction these days that any minor inconvenience stands out? Idk. Anyway, keep doing you man. I absolutely love the content.
One thing I remember about MACK truck engines is that the crank was ground to "whatever fit" one journal may be 5 under, the next 10 under the next 15 under and the next 5 under again. Then you just used whatever bearing fit.
Would definitely take experience to know the difference between center line of those rod journals and journal runout. Very interested how you set that crank up for grinding.
Nothing like old school knowledge passed fown through generations!! I wish I had these guys local!! I'm sure all mechanics and engine builders do! Good machine shops with their level of knowledge is rare!
This was worth every minute! I love watching you guys and have been watching ever since the Pontiac engine you guys rebuilt. I’m an automotive mechanic, so I see more nitty-gritty than this, but I love the work you guys do!! Keep it up 🤘🏼🔥
This is probably the most fascinating video I have ever watched. That Clean up Man Sure is one Smart Guy, !!! Lots of knowledge and Skill in Dads experience., Great Video.
My dad was a machinist in the Apollo and Gemini Programs. I never saw him work because he died when I was 13. Watching the careful precision exhibited here shows me how a brain matched with skilled hands guided with keen eyesight is a beautiful thing to watch at work. You cannot have a bad day with a headache or physical impairment and do this job with the high level of skill exhibited here. This is what awesome looks like.
Very skillfull and outright amazing. Working with a tousand of an inch or a tousand of a millimeter! That's thinner than a human hair! What a craftsman this is! 👍👍👍👍👍
I can remember back in my teens taking a motor to a local machine shop for to have it bored and decked and the place was a page out of history. From talking with the old timers there they started the business for model As and such in the 20s and watching him work on my SBC from memory was a thing of beauty. Place was messy but their work was impeccable. When I got home I checked their work and couldn't find a variance over .0005. After that anything I had them do I didn't waste my time making sure it was right.
Every time I see a video of yours, I completely lose track of time. I look at the clock and think something... Another hour has passed 😅 Better than any movie watching you work.
watchin your dad account for the slack between the threads each time he turn s knob (not just for the ready rest) brings joy to my heart. truly a master. please shake his hand for me.
I’m not sure you realize just how awesome a machinist you dad is. His skills are absolutely impressive. He is an excellent teacher too!
To me a great machinist is on the same level as a doctor.
@@WalkToPoland Agreed, and my father and grandfather were both doctors.
Begs the question if it's just more cost effective with time and money to just replace the crank rather than pay someone to do this who has a ton of experience in it. This definitely isn't cheap to get done by someone who knows his or her shit very well.
@@WalkToPoland You know it'd be kind of nice if steel could heal itself after making a mistake like the way our bodies heal after damage.
@@FinalFront they can weld journals to add metal.
This video is beyond priceless. This is like watching magic and your father is the magician. I am 81 years old, have worked on automobiles and machinery much of my life, but have never seen such an excellent introduction to anything as complex as crankshaft grinding as this. Thank you very much for sharing this!
Exactly what I was thinking and what I would have said. Tho I'm roughly 10 years younger. This video is truly priceless.
I am 23 and watching this, haha. I have been enjoying these videos quite a lot and at the same time learning so many new things. My dad, grandpa, and a lot of my family are/were machinists, but sadly, I never got a chance to see them in action. My dad had a machine shop similar to these good folks until I turned 13, and we moved away, and he switched his line of work. I am also becoming an engineer, and I think watching and understanding how things are actually made/maintained/repaired is such a valuable experience that 90 percent of the engineers have no clue about. Kudos to this dad/son duo for making these videos!
i totally agree with you
These skills are extremely rare because it’s usually cheaper to simply replace the crank or even the entire engine. But when there is no other way you’ll need experts like this.
The movement pattern of your Dads hand tightening the steady rest just the right amount while grinding is a true testament of a master machinist becoming one with his machine. It's a humbling experience to see this kind of dedication to the craft.
Decades of experience to be this great at it.
This type of experience is what brings out the best in the engine parts for peek power and durability
@@nexpro6118 yea, to me, this is the work of a million or two mile motor.
I've been a machinist/tool and die maker for 45 years and this is the first time I've seen a crankshaft ground! Thank you, it was a wonderful video!
Me too , and it's so relaxing and peaceful.
I've allways wanted to see the full procedure this is great
labor intensive for sure@@davidhamilton7628
As a retired tool maker he didn't know what size radius he had only that it was similar in size to his radius gauge this radius on crank prevents cracks from forming when under stress we always ground radii on punches and other tooling that were under stress but on profile tooling if specs. called for .250 radius we ground that dimension to .250 plus or minus .0002 to have proper punch and die clearance.
Спасибо за хороший урок. Вы настоящий мастер, который любит и понимает свою работу. Здоровья и благополучия. Жду новых видео в этом году!
Fantastic video I'm a retired 35 year diesel mechanic, all the parts we put into the engine are nicely wrapped from the machine shop and ready to go. I never knew until I saw your video how much time and precision goes into getting those parts ready. I guess I'm trying to say it's machinist appreciation day. 😀
Awesome 😊
Watching your Dad is like watching my Dad when he was still here. From lubing the chucks to the way he explains everything. Brought a smile to my face. I was lucky to have a wealth of knowledge just like him.
This is so impressive. We need more guys like him around these days
this guy belongs to a vanishing breed, people who know how do things.
We are all very privileged here to be watching a true master at work, one who is totally at one with his machine. SImply put, this is a grinding master-class.
Many thanks for taking us along on this job.
David in the UK.
I saw no mistakes. Only happy little accidents. Watching this man set up a machine and work is comparable to watching Bob Ross. So educational, yet relaxing.
I think it is around 31:21
@@tablekwan with all due respect.... You misunderstood my comment.
And you can imagine some wispy little clouds on the horizon over there.
Working with Metal is closest to Bob Ross’s philosophy, but some operations you can’t go back and add metal back
@@Len_M. not according to our friends who like to do everything while wearing sandals and squatting in the dirt, if you know what I mean😂😂😂
I ground crankshafts for many years using a Berco RTM 300. Loved the "stabilizers" between counterweights! I even had a little umbrella shade on my Arnold gauge too. You guys have made a great and fun video explaining this process. Thank you crank brothers!
I absolutely LOVE how clean your shop is. Most machine shops I’ve been in is an absolute cluster f**k. If I was local I’d feel confident hiring your service
Yeah one of the first machine shops I worked in was a filthy clusterfuck. Piles of tools, parts, everything coated with a thin layer of grease & metal shavings. I offered to clean it as it was making jobs take longer always having to search for things. Shop owner didn't want to pay me to clean it, so I cleaned it on my own time for free.
I’m glad I found this channel I believe I’m just south of their shop . Not many good machine shops around anymore. I’m impressed by the care they have taken in machine work .
In Switzerland you could eat dinner off the machines.
It might be worth shipping parts back and forth.
34:19 “okay I’m going to rotate the crankshaft 120 degrees” does it by feel. Lands the index only a couple thous out eyeing it. Master at his craft. Loved the video
67 year old truck driver here. The ART of grinding cranks like this has been a fascination since I was a kid and overhauled my go-kart's 5hp gas engine. The skills, talent and most importantly patience to do this job the right way, everyday! God bless you for your talent, and thanks for letting us look over your shoulder.
My father used to wrap rubber inner tube strips around the journals , 4-7 wraps on each journal to aid with vibration.
amazing. I'm so glad I found this channel. I lost my Dad back in 2010, and seeing you work so well with your father makes me smile.
I lost mine in 2007 and still miss the projects with him. Watching other dad's with there kids doing things like this bring back the great memories with mine, no matter what the project was!
Keep the cleaning guy around, he really seems to know his stuff. The only way you get on a machine like this is through a lifetime of experience.
I really enjoyed seeing you and your dad work together. As a young boy growing into a young man, I got to work with my dad who was an expert butcher in our butcher shop. There's nothing like learning a trade from a man that not only is an expert in his field, but loves his work and loves teaching his son to know the trade as well. I still appreciate my years in the market with my dad.
Thank you both so much for this VERY interesting video. As an OLD(80) yr. old 'gear head' from the big block era of the 60s, and a guy who still changes oil and greases the front end of my '02' Ford E250, I really appreciated the workmanship, and honesty shown in this video. BTW, I watched the tear down video of the 327. I rebuilt my share of small blocks way back when, that was a mess. Thank you for both videos. Sincerely, Bruce F. Raykiewicz.
I used to work at cummins JEP putting those cranks in the ISM and ISX engines. What a great place that was to work. Dunno what it's like these days but it was utterly astounding how good the workers there had it. Quality was absolutely amazing also.
I had never seen this done before and had long wondered about how it is done. The attention to detail and personal dedication to excellence that are required are simply incredible! Hopefully there are a few young people out there learning this from experts like your dad.
Me! 🙋♂️ 23 and an engineering student. I found their channel and felt like I struck gold. Invaluable knowledge for all engineers who design the darn thing, haha!
One of the MOST Interesting Videos I’ve watched.
I always thought machinists were very very smart operators. Now I know how important they really are. I’ve had several cranks ground but never realized how special they are. Thank You Thank You 😊
This fella is wearing a botton down shirt with an emaculate shop. A true pro and a dying breed. Love these guys.
I could honestly say I’d learn from you any day. A true leader is a teacher knows knowledge is power. Bless y’all.
The amount of work that goes into setting this up is really amazing. I never thought about how complicated grinding a crank could be.
I was thinking the same thing. I had 0 idea that it was that complex or took that much time and knowledge to grind a crankshaft.
@@imacgst27 cam's are just as bad if not worse depending on the grind.
My father was an auto machinist for 50 years, being an instructor toward the end. I always saw him by the crank grinder and heard his stories about grinding cranks but never saw him set one up. Real interesting on how it all comes together. Thanks for the video.
I did not know grinding a crankshaft was this involved. You guys EARN your money!
Chatter is always the main enemy in turning these large cranks.
Thank you for the demonstration of crankshaft grinding.
I also subscribed and look forward to more similar demonstrations.
After watching these videos I really appreciate the level of precision and skill that goes into machining engine parts. I also understand why it costs what it does. Love the videos you guys!
I'm just finding you guys and my goodness I love this. I'm 4 years into working with my dad as a diesel mechanic, so we're a father son team doing the before and after of your work here. He has like 45 years in the industry and he's been a great teacher too. Keep it up yall
I've only ever seen this done in one of those time-lapse videos, glad I found one that actually explained the whole process.
This is gold. I missed my calling early in life. This kind of work is what I should be doing. Really appreciate the time and patience you both put into sharing your craft and profession. It is something to behold.
Been a Ford mechanic for 30 years and this is the work I never saw, very informative and interesting 🧐 thanks 😊 😊
Our shop teacher told us to start any grinder gradually as moisture gravitates to the low spot and an out of balance grinding wheel can shatter. If we had shop early on Monday you could hear the grinder vibrate on first. The load reason is valid too. Wobbels the mad Aussie.
I really admire all the precision you and your dad go through to ensure you've done a good job. Don't tell me it's good, show me its good.
Thank you for this content! As a regular machinist for nearly 30yrs, I've always wondered how cranks were ground and never have seen a machine like this. What an amazing piece of equipment!
I suspect your father was extremely disappointed in himself with the mishap leading to the chatter, but the true professional in him did a great job in recovering the crank. I hope in time under his tuition you inherit his wealth of skill and knowledge and can continue to build on his legacy.
But I'd bet it would never had happened if he wasn't being distracted by the filming and live questions.
I bet he was glad it was on the first journal instead of the last one.
Most people have no idea how much work it is to hook a crank on the grinder for such small grind work. The setup will easily eat several hours - I can certainly appreciate the work involved.
I have a totally deeper level of respect for the engine machinists that did work for me when I was building engines in the 70’s - 90’s! Thank you for opening my eyes. Your shop would be my go to shop if I was still in the industry.😊😊
Great video!! My father ran an engine machine shop for 40+ years. He use to do a lot of crank and cam work, and there were many cranks that came in he used the Eutectic spray welding on to bring them back into spec without taking too much material off. Grinding camshafts was the coolest thing, he use to grind a lot of custom profiles and lobe separations on them, use to build them back up if they were worn too.
I would love to see that process
You guy’s are amazing to watch. You’re dad knows what he’s doing and cares about every single thing he does. Around here we all get scared when we have to take something to a machine shop because we aren’t sure what kinda hack job we’re going to get back. Keep up the good work!
I've seen quite a few guys that consider themselves machinists but your dad is up a few levels! Quite amazing attention to detail and beautiful result - could spend all day watching. Best wishes from the U.K.
i was a union Field machinist/millwright for 15 years and i always enjoyed getting a working buddy like your farther, a person to take the time and teach the younger Generation all the little tricks and full of wisdom of the trade. i appreciate the channel man. yourself and the Pops are doing an amazing job. kepp up the great work!
Love your work,guys.
I trained as an engine machinist/builder at Cummins in the late '80's.We did everthing in-house except for crankshaft grinding,,so it was good to see a Cummins crank getting machined correctly.
Alll the measurements and magnaflux was done by us. To measure the fillet radius,we had different size spheres attatched to the end of a thin metal rod.Our magnaflux was the biggest in the southern hemisphere,300 volts d.c.
This was at Cabramatta(aboriginal word),Sydney,Australia.
Subscribed!👍
Thanks Jim, very cool, I’m an old truck mechanic and back in a day and we’re talking 1975 I used to work on Cummins 318s and what I remember most about them is that they used to snap crankshafts. I’m not a machinist I’m a mechanic.
Amazing to see how willing and happy your dad is to do this work while being filmed and asked numerous questions.
As someone who dabbles in machining quite frequently on an engine lathe, I have an enormous respect for his ability to maintain focus and tight tolerances under such circumstances.
It's so easy to become distracted and make mistakes when you're trying to hold tolerances to tenths of a thousandth.
Mad props to both of you!
I think Jim would be a great instructor at a training facility. He explains things so well. We need to pass on the knowledge he has before it is lost.
Facinating to watch. Seeing a crank spinning off center when doing the rod journals messes with my mind! Great camerawork on your videos too!
Wonderful! It is apparent that this gentleman is an artist and the machine is his instrument, as if he's a musician. He tunes it and accomplishes great results. I am reminded of my grandfather, back in the '60s, as I'd watch him work in his home shop. I wish I'd learned more from him at that time. Thanks for a fascinating video.
To say that this is "oddly satisfying" is a massive understatement. As a truck driver both driving and wrenching on trucks, I've seen "in-frame" overhauls up close. My father created a trucking company and in those early years I was a grease monkey. Dad had a couple of crankshafts standing on end in the corner of the shop. They were for Big Cam 400 Cummins. He always said they were good and now I know why he believed that. The details of dialing in all of those measurements blows me away. What an awesome video! Couldn't take my eyes off it!! Thank you very much for giving me a better understanding of the inner workings of a great engine!
I've got a detroit 60 series with 850k on a rebuild. Bout due for another. This was super interesting.
How well you and your Dad look our for your machines, is a sign of why you have PRECISION in your shop! Good job, and have a most blessed Christmas!
That cleaning guy is really getting the hang of that crankshaft grinder! Seriously, thank you for showing us the entire process of grinding a crankshaft. We appreciate the in-depth content!
I love the way your dad is meticulous about making sure it's right and the fact that he teaches speaking out loud of everything that he does that is awesome
What a great way to start the day! Thanks for sharing your Dad's knowledge.
I'm an engineer that occasionally machines things. The artisanship and professionalism shown here is extraordinary, thank you for sharing!
Time for a new deck. Good winter job. Thanks Mike!
It was a pleasure and honor to watch and observe the master at work. Great job. Im always amazed by the skill and knowledge it takes to complete this type of work.
My gosh, I had no Idea the work that is done on a crank. The machine is awsome but the operators patience and experience are of equal value. Thanks guys
The bolt and nut idea, to keep the crank from flexing, genius.
Hi Jim I must compliment you on attention to detail on the process of Crank-shaft Grinding , I would loved to have you as my teacher when I was serving my Apprenticeship many moons ago , I would consider you as the Master of all , people like are hard to find now-days, Keep up the good work Regards to Tim in Ireland .
Thanks for showing the whole process. Crankshaft grinding is one of those "black magic" processes that your Dad has spent years learning. That crank is probably more consistent across each journal than it was out of the Cummins factory. I don't think the small drop in bearing size will really matter.
Ive heard of people boring one cylinder out of 8 and runnin it for a long time
Just found your channel thru your tear down of Scanner Danners engine. My father was a tool and die maker from the 40’s, 50’s and 60’s, I turned out to be an auto technician, 50 plus years and still doing it, and my son is a welder. A family of tradesmen. This was extremely interesting to me and all I could keep thinking of was the engineering and design of the grinding machine and lathe. Amazing.
I have not finished watching the video, roughly half way through. It is my favorite so far. Great dynamic and the wash guy breaks it down so well. You guys make great content.
I wish I had one tenth of the knowledge and experience your dad has. A genuine artiste!
My god..i guess i was wrong when i asked my math teacher" when am i going to use this in life?" You guys rock. Love your stuff
I used to do this for a living as a apprentice then went and did a apprentice boilermaker welder more money but I did enjoy doing motor work. 🇦🇺🙏 we had the same machine at Mendham engineering I didn’t see you test the wheel with the ring test but you guys look after your wheels no doubt. We had books that would give us the off set for the weights so we could set up the big ends and the mains we just Center of the crankshaft. Love your work guys I do miss it sometimes. 19:54 what a smart idea. After watching this video our machine was a little bit different it was about 35 years ago.
The way he explains n goes deep into it. Hes a very gud teacher to b a student of.
this long format is awesome. I've had a idea how its done but seeing how much really gives me a new appreciation on how much work has gone into parts i've sent out.
He's the best teacher I've ever seen on TH-cam brilliant
These lessons from your pops are incredible.
He's a solid machinist, I'm glad you're getting to have this kind of life and experience with him.
Best wishes to you both and thank you for your time and information!
always wanted to see how a crank was ground....now this 74 and retired automotive and industrial mechanic can rest...thanks....accuracy is hard work...takes a special person.
Thank you for the endless hours of videoing, editing, and uploading. Allowing us to see the tedium and nerve it takes to properly prep engine parts. Through all the perceived blemishes, I personally see greatness in what your doing. Thank you for allowing us into your business. Luckily there are tolerances, and your providing enrichment in my life. 👍👊🇺🇸!
The true meaning of "They don't make them like they used to!" Unreal to see true talent of you guys work your magic and appreciate the attention to detail!
Fascinating work- you present your subject with such entertaining clarity- I would watch you experts at work all day! Always wanted to know how cranks were ground and how they were balanced and you've demonstrated them both so well. Thank you!
That is years of experience there speaking. Nothing better then a machine shop that knows every little thing like this about just about any engine and what's best to do for it.
Thank you so much for a great video. I loved how long it was and how much you explained in detail for all of us. After every video I always say, I wanted to see more lol. Thanks again to both of you for showing that there are still people out there that have pride in their work. Definitely far and in between these days.
Really enjoy your videos, I’m a retired machinist with 45 years experience and still enjoy watching and learning. Thank you
You actually get the crankshaft closer to the correct specs than most engine machinists I've seen in 20+ years. You are a inspiration to be better than it will do
Begs the question if it's just more cost effective with time and money to just replace the crank rather than pay someone to do this who has a ton of experience in it. This definitely isn't cheap to get done by someone who knows his or her shit very well.
@@nexpro6118 In some cases it is cheaper to just buy a new crankshaft. With something like a 5.9L Cummins it'll be $800 - $1000 for even a cheap Chinese crankshaft. Whereas it'd probably cost $200 - $300 to have the original crank reground.
Which I've had such bad experiences with the cheap Chinese engine components that I'll personally never use them unless I absolutely have to. I've seen so many pistons, cams, cranks, connecting rods, bearings, etc. that are either manufactured way out of spec, made out of inferior steel/aluminum, or both. If it's something like a carburetor for a lawnmower then they usually work fine, but for a big 130lb Cummins diesel crankshaft...there's no way I'd take a chance on it.
@@FinalFront thank you for the response!!!!
Then, the machinists in your region are shit. There is no other correct specs than the right specs.You either get the correct specs or you fail.
@@mihaigheorghiu9071 I have trouble getting a head shaved properly. I found a specialist now but I have had 3 heads destroyed
You guys answered questions in my head that have been there for years. Thanks....
Your dad preserving motor windings by starting the wheel in sequence... exceptional attention to detail and acknowledgement that the tools he uses need to be respected!
I love this channel please give us more 4.2 Jag!
I believe that machine is over 30 years old as well... it looks to be in excellent condition. You can tell he absolutely takes pride it what he does and his machines.
Im 60yo was raised by my father who grew up on a farm so I know how to pull off all the crazy ways to keep an engine going (aka backyard hack). watching your videos is truly amazing...
Loved hearing the crack check bell ring. Machinist music 🎶
You guys did a great job with this video. I was in the machine shop business from the mid 80's to the mid 90's in west Michigan. All the information that you were mentioning on the setup brought me back to things that I totally forgot about a long time ago. I spent my time on a van Norman about same color as yours. We did everything from BS engines to big diesel. Thanks again for producing a video of the trades and craftsmanship that are not seen so much anymore.
Niesamowita praca ! Doskonały nauczyciel który potrafi w bardzo prosty sposób wytłumaczyć wszystko od podstaw. Nie ma żadnych w wątpliwości że jesteście profesionalistami w swoim zawodzie. Podziw i szacunek za wspaniałą robotę. Pozdrowienia z Polski.
AFTER READING SOME OF THE COMMENTS ,,, THAY REALLLY SAY IT ALL ,,, GREAT WORK GUY,S
I USED TO RUN A VAN NORMAN CYLINDRICAL..we did cranks we did hydraulic rams and polished with cork belts..i know this work and with experience it becomes old hat but ur dad did a great job of his explanation/execution and demonstration both your detail to set up shows in the finished quality of your work..
So interesting to see the time and effort involved with machining the engine parts. Great job guys.
Been selling Industrial Tools for over forty years now. It is so very rewarding to see Craftsmen who know how to use and get the most performance from their tools. I especially enjoyed your Father showing his skills in Indicating the Crank Grinder before beginning work on each journal. I would love a visit to your shop just to sit and watch you two.... 😮
Fascinating stuff. Never seen as step by step informative video with lots of tips from an experienced machinist.
Great job without getting out in the weeds. Old Machinist myself. I have run Storms, van Normans. Peterson and Berco.. Again. Great job, not too many of us left.
Love the content! From a marketing pov, you may want to A/B test just posting the video.
A premiere sends the notification when you first schedule it, but from the audience pov, it’s just a false alarm. Then when I try to find the video again in my notifications/subscription feed, I have to scroll back days to get the video. I’ve heard that creators get better notification stats and click through rates by avoiding premieres. Just something to consider, tho I saw your comment about engaging with the audience live and that’s valid too.
Either way, you guys have been a part of my Sunday evenings for a while now. Love the consistency!
I’ve tested both, and I find to have better luck with premiers. I understand it being a tease when it announces it ahead of time, but it also gives the audience time to plan their schedule in advance to make room for watching the video.
From my perspective as both a creator and a content consumer, I don’t get why people get so upset over the content they get to consume for free.
No different than a movie trailer coming out 6 months before the movie actually comes out.
@@JAMSIONLINE I love the perspective. Yeah I don’t get people getting upset either. I guess consuming content is so low-friction these days that any minor inconvenience stands out? Idk.
Anyway, keep doing you man. I absolutely love the content.
One thing I remember about MACK truck engines is that the crank was ground to "whatever fit" one journal may be 5 under, the next 10 under the next 15 under and the next 5 under again. Then you just used whatever bearing fit.
Would definitely take experience to know the difference between center line of those rod journals and journal runout. Very interested how you set that crank up for grinding.
Nothing like old school knowledge passed fown through generations!! I wish I had these guys local!! I'm sure all mechanics and engine builders do! Good machine shops with their level of knowledge is rare!
This was worth every minute! I love watching you guys and have been watching ever since the Pontiac engine you guys rebuilt. I’m an automotive mechanic, so I see more nitty-gritty than this, but I love the work you guys do!! Keep it up 🤘🏼🔥
This is probably the most fascinating video I have ever watched. That
Clean up Man Sure is one
Smart Guy, !!! Lots of knowledge and Skill in Dads experience.,
Great Video.
My dad was a machinist in the Apollo and Gemini Programs. I never saw him work because he died when I was 13. Watching the careful precision exhibited here shows me how a brain matched with skilled hands guided with keen eyesight is a beautiful thing to watch at work. You cannot have a bad day with a headache or physical impairment and do this job with the high level of skill exhibited here. This is what awesome looks like.
Very skillfull and outright amazing.
Working with a tousand of an inch
or a tousand of a millimeter!
That's thinner than a human hair!
What a craftsman this is!
👍👍👍👍👍
I can remember back in my teens taking a motor to a local machine shop for to have it bored and decked and the place was a page out of history. From talking with the old timers there they started the business for model As and such in the 20s and watching him work on my SBC from memory was a thing of beauty. Place was messy but their work was impeccable. When I got home I checked their work and couldn't find a variance over .0005. After that anything I had them do I didn't waste my time making sure it was right.
Every time I see a video of yours, I completely lose track of time. I look at the clock and think something... Another hour has passed 😅
Better than any movie watching you work.
My goodness..The volume of knowledge is astounding !
watchin your dad account for the slack between the threads each time he turn s knob (not just for the ready rest) brings joy to my heart. truly a master. please shake his hand for me.