Thank you for sharing this. I had the same issue but I found a different cause. with mine, I opened the back cover and the side covers.. found a small sensor by the gears .. it was supposed to have been mounted on a small metal plate.. it was just hangning.. so i used a zip tie.. now its working again :)
Hello Sir, My Epson stylus photo 1400 power supply blown it not power on now after I repair the power adepter is power on but not working it just stable.
How about this one. Have a 1400 converted it, did some print head cleanings until it was clear. All worked fine, today was ready to put my dtf ink into new cartridges and figured let me do one more cleaning. Cleaning ran , but then i noticed printer is making a beep noise and won’t power on. What did i do wrong ? Now is the fried ? Can it be fixed ? How can I avoid this on my next printer ?
thats what happened to mine, I had to scrap it, i found this online, not sure if thats your issue but its a start - resetkey.net/solved-epson-1400-ink-and-paper-lights-flashing.html
Sup King! After 3-4 years of storage I'm gonna try and revive this printer, It's telling me it's low on ink. Do you think that is the real reason or do these things just become bricks after not using them for a while? Typically the guy at the local shop told me to buy another one but I can't help to wonder if it still works. Thanks in advance.
The main reason printer wouldn't work after being pulled out of storage is the print head being clogged, try flushing it out before you do any other trouble shooting,theirs a print head unclogging kit on amazon,
Hi King Print, I got one red blinking on my Epson 2200 but my friend help me to disassemble it then I lost the power to power it on. Why? What's the problem?
Hi King Print, it's ok for the late response. Unfortunately, I couldn't fix it. Can you have me with telling me what to do in writing. Thank you very much
The printer is busy. Wait for the power light to stop flashing before turning off the product. If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. ... You can continue printing, or check which cartridge is low and replace it.
I'm not familiar with the r2000, there is a epson chipset reset software, try that before you do take printer apart, you can find it free online might take some time to find, they also sell it on ebay
Try cleaning the print head, unlock print head from carrier (where you can move it freely by hand)unplug it,soak a paper towel with rubbing alcohol or windex with ammonia d, place towel under printed and leave it there overnight, if it is clogged you will see a ton of ink on paper towel,another way is to buy a ink clog system which has a hose &syringe which flushes out the print head,hope that helps, thx
Thanks for watching, if you liked this video don't forget to like and subscribe
Nice you get beautiful music in your back yard!!!! To me that’s the best part of the video!!!😊
Thank you for sharing this.
I had the same issue but I found a different cause. with mine, I opened the back cover and the side covers.. found a small sensor by the gears .. it was supposed to have been mounted on a small metal plate.. it was just hangning.. so i used a zip tie.. now its working again :)
The Band is 🔥🔥🔥🔥🔥
Hello Sir, My Epson stylus photo 1400 power supply blown it not power on now after I repair the power adepter is power on but not working it just stable.
Ur the man! Go Spurs!
How about this one. Have a 1400 converted it, did some print head cleanings until it was clear. All worked fine, today was ready to put my dtf ink into new cartridges and figured let me do one more cleaning. Cleaning ran , but then i noticed printer is making a beep noise and won’t power on. What did i do wrong ? Now is the fried ? Can it be fixed ? How can I avoid this on my next printer ?
thats what happened to mine, I had to scrap it, i found this online, not sure if thats your issue but its a start - resetkey.net/solved-epson-1400-ink-and-paper-lights-flashing.html
@@KingPrint thank you , sadly mine won’t even power on now just makes beeps ha can’t even get to the wic tool
THANKS FOR THE INFO
Sup King! After 3-4 years of storage I'm gonna try and revive this printer, It's telling me it's low on ink. Do you think that is the real reason or do these things just become bricks after not using them for a while? Typically the guy at the local shop told me to buy another one but I can't help to wonder if it still works. Thanks in advance.
The main reason printer wouldn't work after being pulled out of storage is the print head being clogged, try flushing it out before you do any other trouble shooting,theirs a print head unclogging kit on amazon,
Buy refillable ink cartridges the cis is messy
Hello what about the maintenance box?
Hi King Print, I got one red blinking on my Epson 2200 but my friend help me to disassemble it then I lost the power to power it on. Why? What's the problem?
sorry for late response, just going through my comments today, I hope you fixed the problem but if not what exactly is the printer doing?
Hi King Print, it's ok for the late response. Unfortunately, I couldn't fix it. Can you have me with telling me what to do in writing. Thank you very much
I have a 1400 green light on power button keeps blinks> solutions?
The printer is busy. Wait for the power light to stop flashing before turning off the product. If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. ... You can continue printing, or check which cartridge is low and replace it.
HElp pLEAS.. i have a epson dtf 1390/1400 DTF , brand ERASMART but the red light INk is on .. who resset or someting i need do?
There is a reset software you can download, look for epson 1400 reset driver
I have problem with dtg r2000 it's say ink out and fatal error what should I do?
I'm not familiar with the r2000, there is a epson chipset reset software, try that before you do take printer apart, you can find it free online might take some time to find, they also sell it on ebay
Hey my Epson 1400 won't print black or solid black? Do you know what could be the problem?
Try cleaning the print head, unlock print head from carrier (where you can move it freely by hand)unplug it,soak a paper towel with rubbing alcohol or windex with ammonia d, place towel under printed and leave it there overnight, if it is clogged you will see a ton of ink on paper towel,another way is to buy a ink clog system which has a hose &syringe which flushes out the print head,hope that helps, thx
how did you get the ciss to work?
You just install it as you would OEM ink and it should work, make sure you get a ciss with a auto reset chip,
The Epson 1420 doesn’t have that?
Man, what an ordeal to get ur printer goin again. Was that the Burbank band in the background?
Warren band in the background,Thanks for the comments, and thanks for watching