Oh ! that's wonderful. A big big thank you to you, Sir, for this excellent work. Your video taught me 3 skills. 1- How to optimize the "Increments" in "Variable table". 2-How to correctly draw a Trousers basic block. 3-How to better use the tool "Point intersect line and axis". It was all really a lot. So thank you also, for the surprise of the download link of the file. Your excellent gift will allow me to progress further with valentina. Good continuation ! Hoping that Translate will have correctly translated my comment. Oh ! c'est magnifique. Un grand grand merci à vous, Monsieur, pour cet excellent travail. Votre vidéo m'a enseigné 3 compétences. 1- Comment optimiser les "Increments" dans "Variable table". 2-Comment tracer correctement un Trousers basic block. 3-Comment mieux uliliser l'outil "Point intersect line and axis". Tout cela était dejà vraiment beaucoup. Alors merci aussi, pour la surprise du lien tèlèchargement du fichier. Votre excellent cadeau va me permettre de progresser d'avantage avec valentina. Bonne continuation ! En espérant que Translate aura traduit correctement mon commentaire.
Thank you for taking the time to create this great video. Is there any way to duplicate an existing pattern piece within the same project? one of my patterns is pretty much the same as another one except for a small variation and I don't wanna start all over the pattern piece from scratch. Thank you.
The easiest way is to save as another copy of the design and make the modifications in the new copy. I usually make the basic or minimum design as a base. Using the base for the alterations speeds up the design.
Thankyou so much for responding. A8 is (front panel waist width front) which you got by taking (front hook width-0.5= 5.6-0.5= 5.1cm) and A9 is (front panel width) which you got by taking (hip line/4-0= 7.6/4-0 =1.9cm) later on when you make the corrections it isn't shown on the video. Can you message me the changes you made to get the new values. Waiting for your response. Thankyou
The valueas are A8 #FrontPanelWaistWidthFront A9 #FrontPanelWidth The corrections I made in the video were layout changes. In the case of A8 the line width was not correct. If you need more, can you pinpoint the exact time in the video.
Thank you for your video! I've never used the variables table for measurements, only a Tape measurement profile. I'm not sure I quite understand the difference between the two and why (or when) you would use one instead of the other. Is that something you would be willing to clarify?
Can you please make a video on the detailing part. I know you are supposed to go only in a clockwise drection, but when darts and armhole curves for bodices, I always get stuck and the detailing gets all weird. Thank you!
@@stindedesign I'm still learning my way around with the software and most of the tutorials are in another langage so I was having some difficulty. Thank you!
Thanks being so through. I’m not sure what was wrong in the video. However, all the values in the video are correct. I verified those in the original Valentina file.
Yes so what are the layout changes you made? In the case of A8 the line width was not correct so what did you change it to? In the video this is at 24:05
Does valentina work for creting new designs? Patterns without the instructions to create them? Also, how to turn current paper patterns into valentina? Thank you very much!
The key benefit of Valentina is the ability to scale the pattern. For the scaling the relations between the lines and points must be defined. The Valentina could be used just for drawing tool by using fixed values in all places. The scaling is not possible. Normally all lines are in relation to the body values and the pattern scales with the new measurements. The paper pattern is difficult to convert to a real pattern, because the relations to the body is not known.
Great tutorial! And great pattern. Can't open the file though. I get the message: "Exception: Invalid version. Maximum supported version is 0.2.4" Which version are you using? I have 0.4.5 Do you have the file updated to a newer version?
Stinde Design At the beginning you were using your shift key. And it seems like you continued to do so to access menus. I am not even 15 minutes into your video and have to stop following. Too bad because it looked interesting.
The shift-click or two finger click are the ways in MAC to click 'right' mouse button. In Windows and Linux just click right mouse button. Every time the menu appears in the drawing the 'right' mouse button is clicked. I think it is very visible.
Oh ! that's wonderful. A big big thank you to you, Sir, for this excellent work.
Your video taught me 3 skills.
1- How to optimize the "Increments" in "Variable table".
2-How to correctly draw a Trousers basic block.
3-How to better use the tool "Point intersect line and axis". It was all really a lot.
So thank you also, for the surprise of the download link of the file. Your excellent gift will allow me to progress further with valentina.
Good continuation !
Hoping that Translate will have correctly translated my comment.
Oh ! c'est magnifique. Un grand grand merci à vous, Monsieur, pour cet excellent travail.
Votre vidéo m'a enseigné 3 compétences.
1- Comment optimiser les "Increments" dans "Variable table".
2-Comment tracer correctement un Trousers basic block.
3-Comment mieux uliliser l'outil "Point intersect line and axis". Tout cela était dejà vraiment beaucoup.
Alors merci aussi, pour la surprise du lien tèlèchargement du fichier. Votre excellent cadeau va me permettre de progresser d'avantage avec valentina.
Bonne continuation !
En espérant que Translate aura traduit correctement mon commentaire.
Thanks a lot. I'm very happy of your words.
Thank you for taking the time to create this great video. Is there any way to duplicate an existing pattern piece within the same project? one of my patterns is pretty much the same as another one except for a small variation and I don't wanna start all over the pattern piece from scratch. Thank you.
The easiest way is to save as another copy of the design and make the modifications in the new copy. I usually make the basic or minimum design as a base. Using the base for the alterations speeds up the design.
@@stindedesign Thank you very much for the advise. It makes perfect sense. Have a great day!!!
Great Tutorial! Thank you so much for this video and the downloadable block.
Thanks
Thankyou so much for responding. A8 is (front panel waist width front) which you got by taking (front hook width-0.5= 5.6-0.5= 5.1cm) and A9 is (front panel width) which you got by taking (hip line/4-0= 7.6/4-0 =1.9cm) later on when you make the corrections it isn't shown on the video. Can you message me the changes you made to get the new values. Waiting for your response. Thankyou
The valueas are
A8 #FrontPanelWaistWidthFront
A9 #FrontPanelWidth
The corrections I made in the video were layout changes. In the case of A8 the line width was not correct.
If you need more, can you pinpoint the exact time in the video.
Thank you for your video! I've never used the variables table for measurements, only a Tape measurement profile. I'm not sure I quite understand the difference between the two and why (or when) you would use one instead of the other. Is that something you would be willing to clarify?
The clearest definition is that Tape values are personal measurements and the variables table is for pattern related values.
Can you please make a video on the detailing part. I know you are supposed to go only in a clockwise drection, but when darts and armhole curves for bodices, I always get stuck and the detailing gets all weird.
Thank you!
Hi, I have planned to make more videos and detailing will be in it. When, I cannot guarantee, but I will.
@@stindedesign I'm still learning my way around with the software and most of the tutorials are in another langage so I was having some difficulty. Thank you!
Yes, please. This would be awesome!
@@stindedesign Alright, Thank you!
What are the 2 corrections you made At A8 and A9? You did not show us how to correct it too. Otherwise the video is wonderful
Thanks being so through.
I’m not sure what was wrong in the video. However, all the values in the video are correct. I verified those in the original Valentina file.
Yes so what are the layout changes you made? In the case of A8 the line width was not correct so what did you change it to? In the video this is at 24:05
The error was that I forgot to change the line from solid to none, when I created the node. The values are correct.
okay. thanks. do you have a basic body block on valentina?
I haven't made any video about it.
Greaat!!!! Thank you very much!!! Have you other tutorial? pleaseeeee :)) Thank you very much!
Yes, I have planned to do more. Hopefully, in a few months.
@@stindedesign Ohh fantastic! I will be very happy!! :)
Does valentina work for creting new designs? Patterns without the instructions to create them? Also, how to turn current paper patterns into valentina? Thank you very much!
The key benefit of Valentina is the ability to scale the pattern. For the scaling the relations between the lines and points must be defined.
The Valentina could be used just for drawing tool by using fixed values in all places. The scaling is not possible.
Normally all lines are in relation to the body values and the pattern scales with the new measurements.
The paper pattern is difficult to convert to a real pattern, because the relations to the body is not known.
Thank you very much,yes, the capability to scale is amazing, I figured that was the main competency. Thank you again for clarifying.
Great tutorial! And great pattern.
Can't open the file though. I get the message:
"Exception: Invalid version. Maximum supported version is 0.2.4"
Which version are you using? I have 0.4.5
Do you have the file updated to a newer version?
Ok, I managed to fix the problem. I'm very happy to use the pattern now!:)
Just curious, are these men's or women's trousers?
These are for both. Changing the parameters it fit men and women.
Stinde Design Ok, thank you very much! I just bought a Müller & Sohn ebook on skirts and trousers to check it out!
Good, you will find the pattern in the book.
The pattern fits for both, by adjusting the values correctly. In men trousers is more ease. I'm using the same for both.
thanks for taking the time but I did not understand a single thing XD
I'm so sorry, if it was not understandable
how do I knw the values to use
The measurement values are from the person you are making the trousers. The other adjustable values like hem height come from the design.
@@stindedesign thank you
I'm getting so angry watching this. Why aren't you using your mouse? No one can see your keyboard!
I'm using mouse all the time, because Valentina cannot be used with keyboard. Can't you see the mouse?
Stinde Design At the beginning you were using your shift key. And it seems like you continued to do so to access menus. I am not even 15 minutes into your video and have to stop following. Too bad because it looked interesting.
The shift-click or two finger click are the ways in MAC to click 'right' mouse button. In Windows and Linux just click right mouse button. Every time the menu appears in the drawing the 'right' mouse button is clicked. I think it is very visible.