I cut as close to the lines INSIDE then sanded the rest. Beveled some corners so the light would fit as close as possible. Came out good. Thanks for the vid!
sorry dude been super busy. so basically i used the extra hid brackets i had. i bent them like an L, now with the foglights in place you have to measure the distance from the mounting hole on the back of fog to the back of the bumper. After that you wanna bend the bracket like an L and make the longer side face down towards the bumper, you wanna make about 1/8 of an inch longer then what you measured from the mounting hole of the fog to the bumper. That way it will be kind of a pressure bracket, so you may need to play with the length a little of the L a bit to get it perfect. i hope this helped, thanks for watching dude.,,,,
Where did you purchase the foglights? I searched all over for 2003-2006 Accord fogs and that are coming up are some rounded fogs. no where near the same as these.
Hola, soy de Perú. La verdad me encantó no he visto otro video igual. Tengo mi primer Crv2001 y lo uso mucho para hacer viajes largos y esto me ayudara mucho. Una consulta si los neblineros fueran los circulares como los pondria ?
así que, básicamente, solo mida el lado de la luz y haga que su agujero sea más pequeño que eso. Y basta con recortar el parachoques poco a poco para que quede perfecto.
What HID's your running? I got innovative for my headlights but been getting this problem lately that they flicker once or twice n then eventually one of the 2 turn off. Wondering if i need resistors kr something like that.
I'm running Kensun's, yeah the problem with HIDs is the ballast's don't last as long as the bulbs, the ones I have on the V haven't done that yet but all my other cars that I've ever had HIDs on have....you can get a pair of 55W ballast's for pretty cheap now a days, that should fix the problem....
I'm actually gonna show you guys that on the next video, but basically there are 2 or 3 little spots that have the male Spade connectors, get out your test light or volt meter and one of those only gets power with the key on, so I just popped a female butt connector on that red wire and plugged it in. Super easy
So basically i used the old hid brackets as pressure brackets. So they are just a hair longer from the inside of the bumper surface to the mounting hole point on the fog light. So when you install the bracket into place, it will push itself against the bumper surface and stay stable from the slight pressure...
@@ThatDudeJoe very nice Joe, I am pulling graveyard shift tonight, thank you for the reply. I’ve had my crv for 4 years now, I’d like to restore it, very good car.
No, the fog light wiring and switch that the kit came with worked perfectly, I wanted to get the factory switch for them but the switch fit so good I said screw it, lol maybe I'll source the factory one soon and swap it out
@@ThatDudeJoe i was talking about using the factory fog light connector its located next to the power steering reservoir? I didn't need to tap or splice any wires
Oh I see, but no I didn't and I didn't have to cut or splice any wires anyhow just 1 female connector that I put onto one of the available male connectors on the fuse box under the the dash and I was good to go
+35 I believe, and thanks bro... Yeah I appreciate that that's part of the culture now a days but I'm old school where the fitment is almost straight up and down.....
The rear camber has got to go my g ,you should put some thicker tyres on those wheels and some spacers in the rear. Would look pretty aggressive. Good job on the fogs tho 👏🏻 I may be doing the same at some point.
Hey, i have a 98 ive turned into a project ride, and i hate the steering wheel, ive been looking to ditch it, where did you get that steering wheel at,
@@ThatDudeJoe thanks man, oh btw i had the idea of using civic fog lights like those, but i wasnt really sure how they would look and didnt want to ruin my bumper cover but since you took that leap for the rest of us and it worked out i will go ahead
03-06 Accord Fogs and wiring comes with the fog kit, i am gonna redo my fogs, and when I do I'll make a video to show the wiring, cause ur not the first to ask about that one....
Sub already.. nice crv bro. I just got mine a week ago and started doin it. The front lip looks awesome. Is it bolt on or u modified/cut something from it before it will fit?
hellloooooo, from the West coast, thats actually from my car krew out here in California, maybe one day soon i'll come out with merch and offer the stickers as part of it
Your right brotha ! So far ur the only 1 I’ve seen with a break down on how to do this . I’ve seen them before and wanted to do them myself and the lip so thanks for taking the time to help out ! The crv looks pretty dope aswell . Everybody hates on the rd1s ! Which fog set did u use btw ?
Hey Joe, solid video man. Wanted to ask...can’t seem to find the info anywhere. What’s the lense length and height? Trying to pull this off on an 04 pilot but I have very limited bumper space. Thanks in advance!
Hello, I am from the Philippines. I want to imitate what you did. Just asking is there enough space to fit the bumper fog lamps? How about the windshield washer container? How about also the air duck on the passenger side? I dont need to cut or alter any parts? Can you us more video how you did it. Thank you. More power sir! God bless. Stay safe.
@@ThatDudeJoe Hello Joe! Thank you for your quick reply. What bulb did you use? LED bulb? H11. What type did you used L type or the straight type? Stay safe Joe. God bless.
@@luisnavarro9486 the dogs typically come with bulbs so you can get the size off them, they may have been H11s but I don't remember off the top of my head
I like how you did it, looks pretty cool, gotta question, what lip bumper you used for your stock bumber, i might wanna do that on my 99crv, i would love to see your suggestion. Thanks bro
Glad you made this. I just bought mine with the holes predrilled and dude told me “here are the lights. Good luck” haha. I dig the front lip. What is it from?
“Perfect “ 💯A+ proyect
Thanks broski
Thanks for the video! You are right about the fact that there is a weird lack of crv modification videos in general.
Most definitely
Wow I wish you done this video like 2 yrs ago I was so interested in these fog light on my Crv
Very good work
Thanks dude, it's all good, definitely a lot more videos coming of things that really haven't been filmed for the V....
I like the idea. I saw your video inspired me to do my CR-V already ordered the parts. It was nice of you enough to comments your viewers. Awesome
no problem bro, thanks for watching and if you need any help feel free to ask
Thanks good to know
I cut as close to the lines INSIDE then sanded the rest. Beveled some corners so the light would fit as close as possible. Came out good. Thanks for the vid!
No worries bro, I'm happy to help....
This is an awesome how to video, exemplary, job well done. I have a 1st gen 2000 car-v. Thumbs up brother.
thanks man, i appreciate that.
Not a bad custom install Gene! A few more weeks and you'll be building restomods!!!!
Just got my crv, doin this shit right now. Thanks brotha 🙏🏽
No worries happy to help
That looks great! I need to do this to my '00!! Thank for showing us!
Thanks bro, and no worries happy to help
good job son...keep up the good work...!
thanks pop
That looks awesome. Good job, great vid and keep up with the love of that old skool V!!
Thanks dude, 🤙🤙
Clean bro nice job... I may attempt this my self
Thanks dude, you definitely should.....
Nice looking fog lights, also like the front bumper spoiler, what cars uses them, I mean how to find one of these spoiler? Thanks...
If you check my last video on my channel I tell you all about it and I also show you how to install it
love the mod
on a side note what front bumper lip u have on
thanks
Thanks dude......It's off an 02' Accord.... I made a video going into it more on my channel
Looks so good. Id like to do this with mine. Props from Canada
Thanks dude, I appreciate that.....
More videos! Just bought finally first Mk1 CR-V already painted it in first week.
Congrats bro
Really nice crv.
Thanks bro I appreciate that..
@@ThatDudeJoe you're welcome this video motivated me to do this on my crv i already got the fight light kit with the wires and button happy holidays.
Super clean V 😎
Thanks dude I appreciate that....
Looks good. Nice job
Thanks soo much , I appreciate that
Woww.. terlihat sangat pas , i love it
Thanks bro....
Great diy Dude
Thanks dude I appreciate that
Thank Dude Joe! More power!
02 Accord... I have a video on my channel that gets into detail about it
what name of the orange light in the side bumper? side maker? I can't find on online market place. I want install on my CB7. Sorry for my English.
Looks sweet!!
Thanks dude
Props on the channel bro! I'm camera shy so this is my worse nightmare to do haha
Thanks dude, yeah it's definitely different to be talking to a camera, but I can get use to it, it's pretty fun
@@ThatDudeJoe that's right!
🔥 we do this in Jersey
All love for the east coast fam..... Gotta love how innovative you guys are..
The window washer fluid resolvor is not allowing me to put in the bumper after installing fogs did you have same issue???
I have to double check on my V tomorrow, I think I removed mine
Post a link to the quick release you have 👍
I can’t figure out the brackets how did you do them?
sorry dude been super busy. so basically i used the extra hid brackets i had. i bent them like an L, now with the foglights in place you have to measure the distance from the mounting hole on the back of fog to the back of the bumper. After that you wanna bend the bracket like an L and make the longer side face down towards the bumper, you wanna make about 1/8 of an inch longer then what you measured from the mounting hole of the fog to the bumper. That way it will be kind of a pressure bracket, so you may need to play with the length a little of the L a bit to get it perfect. i hope this helped, thanks for watching dude.,,,,
I cant wait to try this on my RD1! Im not interested in buying a jdm bumper that sh*t expensive af
That's exactly why I did this, most people don't have jdm parts money
@@ThatDudeJoe Can you tell me where you got that amber fog light button?
@@nicholashaddad8659 I found it on ebay
looks good brother!
thanks dude
Accord fog lamp, Taiwan work, can you wear it? Can't find the original.
Where did you purchase the bumper lip? I’d like to get one for mine
If you go to my profile I made a video on it, that'll explain everything
Thanks I found it. Appreciate it
I got my lip honda cr-v 2000 for jeep for got the year thing 2005 to 2007 jeep it fit check it oroung
Where did you purchase the foglights? I searched all over for 2003-2006 Accord fogs and that are coming up are some rounded fogs. no where near the same as these.
Here you go bro.......
www.ebay.com/itm/352732842904
I like that japanese sticko you have on your windshield. Care to share the size and design?
Thanks bro, it's actually my Team name...... Team 2nd Level I was actually thinking of selling them
Where did u get your bumper??
It's a stock OEM bumper
DAM that sippy cup in the back @18:08! Hahahah #GOODUNCLEGANG
Hola, soy de Perú. La verdad me encantó no he visto otro video igual. Tengo mi primer Crv2001 y lo uso mucho para hacer viajes largos y esto me ayudara mucho. Una consulta si los neblineros fueran los circulares como los pondria ?
así que, básicamente, solo mida el lado de la luz y haga que su agujero sea más pequeño que eso. Y basta con recortar el parachoques poco a poco para que quede perfecto.
Can you please tell me where I can find that front bumper lower spoiler or wrap-around Lip that you're using on this car
Go check out my video on how to install a front lip, I tell you everything there
What HID's your running? I got innovative for my headlights but been getting this problem lately that they flicker once or twice n then eventually one of the 2 turn off. Wondering if i need resistors kr something like that.
I'm running Kensun's, yeah the problem with HIDs is the ballast's don't last as long as the bulbs, the ones I have on the V haven't done that yet but all my other cars that I've ever had HIDs on have....you can get a pair of 55W ballast's for pretty cheap now a days, that should fix the problem....
Whats good..just wanted to know where did you connect the extra red wire coming out the switch?
I'm actually gonna show you guys that on the next video, but basically there are 2 or 3 little spots that have the male Spade connectors, get out your test light or volt meter and one of those only gets power with the key on, so I just popped a female butt connector on that red wire and plugged it in. Super easy
Nice!..man thank you boss..good looking out...
Dope 🔥🔥🔥🔥
How did you install the brackets I can’t make out what you did
So basically i used the old hid brackets as pressure brackets. So they are just a hair longer from the inside of the bumper surface to the mounting hole point on the fog light. So when you install the bracket into place, it will push itself against the bumper surface and stay stable from the slight pressure...
The 2 lights you instala in TH-cam crv is honda accord year???
I got those fogs but what did you use to cut the bumper
I used a small cut off wheel
Ok thanks
You have a beautiful car, do you still have it? I live in the Los Angeles area.
i do, shes been sitting under a cover for the last year n a half
@@ThatDudeJoe very nice Joe, I am pulling graveyard shift tonight, thank you for the reply. I’ve had my crv for 4 years now, I’d like to restore it, very good car.
Отлично сделал!
большое спасибо, я ценю это
Good stuff bro
Thanks dude, I appreciate that....
I might just have to do that on my crv
You should, it makes you stand out a bit more with the rest of the Vs
What did you use to cut the bumper?
I used a razor blade, but it would be easier with a dremel
So do the fogs point up since they are upside down?
Actually they point out to the sides of the front end which helps when your driving on a really dark road
Did you manage to use the factory fog light single wire connector? Thats what i did installing those fog light just plug n play
No, the fog light wiring and switch that the kit came with worked perfectly, I wanted to get the factory switch for them but the switch fit so good I said screw it, lol maybe I'll source the factory one soon and swap it out
@@ThatDudeJoe i was talking about using the factory fog light connector its located next to the power steering reservoir? I didn't need to tap or splice any wires
Oh I see, but no I didn't and I didn't have to cut or splice any wires anyhow just 1 female connector that I put onto one of the available male connectors on the fuse box under the the dash and I was good to go
What year Honda Accord fog light and what year the Mugen lip thanks?
Check the description of this video
What did u cut the bumper with
I'm gonna be making a video specifically for the front lip and I'll show everyone how's I did it, but for my original lip I used a razor knife.
What you use to cut the bumper for the fog lights
Where did you order the dog lights?
Can you drop the link??
I got mine off eBay... Here u go
www.ebay.com/itm/352732842904
Bro, wich bumper lip did install in ur CRV? I have one 2000's I think looks so good.
From Costa Rica, blesses!!
hey bro, what offset you running there? i like how your wheels are not cambered in an look pretty straight.
+35 I believe, and thanks bro... Yeah I appreciate that that's part of the culture now a days but I'm old school where the fitment is almost straight up and down.....
Ya empecé a trabajar Saludos desde TJ
gracias por visitarnos y buena suerte con tu instalación
@@ThatDudeJoe amigo te estoy haciendo famosa en una página de honda crv CRT en facebock
@@pancho6432 gracias hermano, aprecio todo el amor
The rear camber has got to go my g ,you should put some thicker tyres on those wheels and some spacers in the rear. Would look pretty aggressive.
Good job on the fogs tho 👏🏻 I may be doing the same at some point.
I'm old school tuner when it comes to wheel fitment, not a fan of poke out
Hey, i have a 98 ive turned into a project ride, and i hate the steering wheel, ive been looking to ditch it, where did you get that steering wheel at,
Mine is a Momo , you can get them at your favorite parts place. Or Amazon lol
@@ThatDudeJoe thanks man, oh btw i had the idea of using civic fog lights like those, but i wasnt really sure how they would look and didnt want to ruin my bumper cover but since you took that leap for the rest of us and it worked out i will go ahead
@@ThatDudeJoe you should do one on a crv specific steering wheel swap, the airbag makes me wonder
The accord lip is it a bolt on deal or any mods done to make it work?
You need to make a couple L brackets work for the outside corners and just drive a couple screws in the front to make it solid
What’s your decal on your windshield?
That's my car crew Team 2nd Level
Where can I get the lights with the wire and how do I connect them ?
03-06 Accord Fogs and wiring comes with the fog kit, i am gonna redo my fogs, and when I do I'll make a video to show the wiring, cause ur not the first to ask about that one....
Nice job, what type of front lip fit a 2001 Honda CR-V?
Thank you very much.... The lip is off an 01-02 Accord
Sub already.. nice crv bro. I just got mine a week ago and started doin it. The front lip looks awesome. Is it bolt on or u modified/cut something from it before it will fit?
What lip do you have on there?
01-02 Accord coupe lip... I made a video about how to install it
SICKKK
Thanks bro
Pretty nice bro.
what kind of foglight did you use in the video?
Check out the video description
Donde conseguiste los faros
Ebay
@@ThatDudeJoe you now te name of te artícul please
@@pancho6432 you want the headlights or the fog lights? You can get both off eBay the fog lights are from an 05-06 Accord
Wat brackets did u buy?
What brackets do you mean?
Front lip from what car
01-02 Accord
@@ThatDudeJoe thanks. I knew I should pick that lip it was on the side street. It was off a accord.
Hey bro they definitely look crazy nice and I'm going to install them thanks you your video by a by any chance do you have the wiring diagram
You don't need one just power and ground because the fog lights come as a lot which includes its own harness
What intake was it that you have?
It's an AEM short ram for an Integral LS that I shortened on the throttle body side to fit the V
What are the leds in the fogs ?
They were a set of random HIDs I had in my toolbox
@@ThatDudeJoe oh nice bro
@@ThatDudeJoe bey bro i have oem fog in a 05 camry and i want them to turn on with parling lights do you have any idea ?
Hi bro.. Are u take out your air cleaner tank at bottom side right hand
Yeah, I didn't need it anymore
@@ThatDudeJoe.. More bettter or higher feul
@@ennua7609 neither just a waste since I'm not using the stock air box
@@ThatDudeJoe tq bro
Bro looks AWESOME !! What kind of lip you have there ?
Thanks dude, it's from an 01-02 Honda Accord coupe
How can I get a sticker like the one on your windshield for my 99 crv , I’m from Ann Arbor Michigan
hellloooooo, from the
West coast, thats actually from my car krew out here in California, maybe one day soon i'll come out with merch and offer the stickers as part of it
What kind of lip are you using on the crv ?
01-02 Accord Lip
What kind of lip do you have on your crv ?
01-02 Accord go check out me last video it's all about that lip
I’m gonna do that to my v where did you get those brackets
Had em laying around, they're from an old HID kit, they are meant to hold the ballast
What type of front lip is that
Check out my last video I tell you all about it
Your right brotha ! So far ur the only 1 I’ve seen with a break down on how to do this . I’ve seen them before and wanted to do them myself and the lip so thanks for taking the time to help out ! The crv looks pretty dope aswell . Everybody hates on the rd1s ! Which fog set did u use btw ?
Yeah, someone had to finally do it, and I'm happy to be the one that did, thanks dude.... They're off an 05-06 Accord
What type of chin you put on your bumper bro ?
Check my videos i have one that tells you all about it.
Did you retro fit your lip? Or where’d you get it? Shits tuff!
Thanks bro, check out my last video I published, I show you how to do it...
Hey Joe, solid video man. Wanted to ask...can’t seem to find the info anywhere. What’s the lense length and height? Trying to pull this off on an 04 pilot but I have very limited bumper space. Thanks in advance!
Thanks bro, I Appreciate that.... I'm not sure on the exact measurements, I will try and measure the lights for you when I get home later
whats your wheels called and specs?
They're a set of Ronal's, not sure on the model but they're 18x7.5 +35
What lip is that from
01-02 Accord I just published a new video on that specific thing if you wanna peep it out
@@ThatDudeJoe coupe or 4 door Mugen lip?
@@MrTROUBLE143 coupe
Are those prelude fog lights ?
06 accord
Thank you
tego una crv 2000 y kiero istalarle un lep afrente me gustaria saber de q carro tu le pusistes a tu crv
01-02 Accord
thank you bro
@@yonathanmejia2859 no problem dude Happy to help
where did u buy lights ?
eBay
Bro what front lip is that,or whats it off of
Off an 01-02 Accord... If you check out my last video on my channel I tell you all about it and actually how to install it
Will do.ty
are those oem headlights?
Naw, got these off Amazon a few years back
I wanted to be the first to hit the like button! I have the same CRV.
we're V bro's
Good job on the fog lights off. What kind of lip is that on your bumper?
Thanks bro, it's off an 01-02 Accord
Hello, I am from the Philippines. I want to imitate what you did. Just asking is there enough space to fit the bumper fog lamps?
How about the windshield washer container? How about also the air duck on the passenger side? I dont need to cut or alter any parts? Can you us more video how you did it. Thank you. More power sir! God bless. Stay safe.
Everything fits fine without hassle, just take ur time and trim the bumper little by little for the dogs and you'll get a good end product.....
@@ThatDudeJoe Hello Joe! Thank you for your quick reply. What bulb did you use? LED bulb? H11. What type did you used L type or the straight type? Stay safe Joe. God bless.
@@luisnavarro9486 the dogs typically come with bulbs so you can get the size off them, they may have been H11s but I don't remember off the top of my head
Fogs*
Hey bro 😎 what cold 🥶 air intake is that?? Link please
I don't have a link, but It's an AEM V2 for a 98 Integra Ls and I cut it down a little to fit the engine bay
ThatDudeJoe ok thanks 😊
@@jcjimenez5327 no worries
I like how you did it, looks pretty cool, gotta question, what lip bumper you used for your stock bumber, i might wanna do that on my 99crv, i would love to see your suggestion. Thanks bro
Thanks bro I appreciate that... My lip is off an 01-02 Accord that I trimmed to fit...
@@ThatDudeJoe nice! Thanks man! Btw, i like on what you did on your crv so clean
@@truenolevin9550 thanks dude stay tuned cause I got big plans for her next year
@@ThatDudeJoe i just hit subscribed bro, thanks again!!
@@truenolevin9550 i appreciate that bro...
You have a link for the headlights
My headlights are just from ebay look up RD1 or RD2 headlights
Ok thanks what about the fog lights?
@@joesphjohnson1487 check the video description
I brought the front lip but won't fix how do I do it make it fix?
I'll be making a lip video soon to show everyone how I did it, give me a few weeks and I'll release it
Glad you made this. I just bought mine with the holes predrilled and dude told me “here are the lights. Good luck” haha. I dig the front lip. What is it from?
No worries happy to help out.... and my lip is from an 02 Accord Coupe
Cool video, what do you paint the bumper with?
Dupli color bumper and trim paint
K
It stays nice for a long time?
@@dailydrivendiecast yeah as long as you do enough coats... I only did about 3 coats and it's lasted for a about 2 years