Shirts, elbow and knee pads, huge watches and sweat bands. Clothing really ;0) There is no real way that I have found to hide an exposed joint and make it look seamless. If your going for that look then your better off purchasing a body with rubber skin over the joints already.
What do you do in the case of the shoulder blade “connection”? Case in point I’ve got the Spectre commander body and the pivoting connection is extremely loose (the arm swings forward and back very easily).
Goes for another tip/trick im having issues with. The peltors attaching to the rails on the helmet. No matter how I try to work them onto the rails, they never stay and just fall off. Any tips? Thank you!!
Body shaming now? Complaining how loose your mercs are. It's not our place to judge their morals. You know nothing of John Snow! :) Instant Tack, for when you look at glue dots and realize you need a bigger caliber!
Thanks for the tip.
Awesome tip! Thank you🤙
King in the North!
Great idea!
Ordered from these guys, they never disappoint especially in customer service satisfaction
Love the support, man, it means a lot!
Yup I use funtak/blutakk they work great!
I had been using small amounts of that medical-grade silicone you use for earplugs. This is much better. Again, great stuff Sully, thanks!
Hello and sorry for the late comment, but what body type is the mercenary?
Thanks
Ttm18 hot toys true type.
Awesome
Hi, nice tips, the vice, holder thing in the background (black/silver) what is it called & where can I get one. Appreciated cheers
@@Ian-lp1pr it’s a clamp I got from a garage sale. When I get back later this month I’ll try and find it. Traveling right now. 🤙
So my sam winchester head came in today and i am trying to put on the body want do i do to make it stay on
I would recommend pulling the insert putting that on the neck peg first if you have a body. Then slide the head onto the insert.
@@blackopstoys want
would this work for sh figuarts joints ? i’ve been trying to find a way to make my super buu leg tighter keeps falling off
I do not know, but if you haven’t tried glue dots I do those first.
Is it easy to remove it though? And how without damaging the figure.
My secret is stick it in the fridge. Once it’s at a cooled temp it comes off easy.
@@blackopstoys ok thank you so much
@@1124Julienne welcome so much! Also cold water if your works. Figure bathtub is good good clean fun. 😆
What plate carrier set up is that? Parts list?
Plate carrier was from an older es figure. Fast mag holsters also es.
Did u trimmed the neck?
Yes.
Have any tips on hiding exposed joints on figures? i.e.Foot joints, Hand joints?
Shirts, elbow and knee pads, huge watches and sweat bands. Clothing really ;0) There is no real way that I have found to hide an exposed joint and make it look seamless. If your going for that look then your better off purchasing a body with rubber skin over the joints already.
What do you do in the case of the shoulder blade “connection”? Case in point I’ve got the Spectre commander body and the pivoting connection is extremely loose (the arm swings forward and back very easily).
Pretty much the same thing with the putty. Those arms shouldn't be removable so it's really just finding the best spot to stuff a little putty into.
blackopstoys unfortunately the arm snapped off at the collarbone area by the screw cap(where the hidden screw) is/was
Goes for another tip/trick im having issues with. The peltors attaching to the rails on the helmet. No matter how I try to work them onto the rails, they never stay and just fall off. Any tips? Thank you!!
You ever used glue dots before? They work like glue but aren't permanent. I recommend a smaller size. Smaller the better ;) but not too small.
@@blackopstoys I’ll give those a try. Thank you!!
Night watcher yo mercenarie
Body shaming now? Complaining how loose your mercs are. It's not our place to judge their morals. You know nothing of John Snow! :)
Instant Tack, for when you look at glue dots and realize you need a bigger caliber!
STOP USING THESE NASTY STAINING TACKY STUFF. I use UHU power tac. It’s grey and TOUGH and can hold up guns and tools on a wall